ECOTRIC Full Glass Windshield with Sun Visor Compatible With Maverick X3

This windshield is a huge upgrade over plastic. I know people complain about instructions and hardware but never mind that. The best way to.mount is using a nutsert aka rivnut and put 4 of the 6mm nutserts in the cage and boom, quick on and off, no sliding, all I did was a piece of 3/16" by 1 inch foam seal down the sides of the windshield vertical sections, don't put it on the cage if your gonna remove windshield in summer put it on window frame. Order some 6mm x 20mm wing bolts ( you need 3 but order 6) and use these to secure the lower piece and by using wing bolts you can quickly remove the lower piece wo tools if you want to vent some air in and the lower valance piece slides right behind the passenger seat. The main frame and upper piece are actually powder coated aluminum and built nicely, lower piece is plastic but as mentioned this is perfect for stowing behi.d the seat if removed for a Lil air. Kemi moto elec wiper kit will work great, but don't use the 1/2" factory hole, drill a new 1/2" hole 3inch away toward passenger side and boom. Only thing to be mindful about is if you have cage mounted side mirrors that wrap the roll bar you may need to notch for them. I literally installed this w my nut sert tool ( available on Amazon of course lol) in 1 hour and used some left over 6 mm torx bolts and washers left over from super atv mud extensions I put on wife's commander. Buy the windshield, and get the good nut seat gun, you'd be amazed how many things you can mount w it just on your utv. I have had one for years and mount my lights, license plates trailer accessories and so on, plus this windshield and the nut sert gun combined are still less then others windshields. 200 miles so far and windshield still looks great and I love it. May even add a flip up vent to upper valance to add to air flow on warmer days when just removing the lower isn't enough air to extend my time before summer removal. Peace, love, family and throttle on my friends..

Fit my 23 can am x3 RS RR model great. This is an awesome windshield for the price wish I woulda went with glass a long time ago so far so great. I love having a wiper blade and the visibility of the glass. No hardware like post said but the install is easy … I did not have to drill into my cage if you know what your doing you don’t have to drill into your cage simple easy install very pleased 5 star

Great windshield the aluminum frame is thicker metal than most of the high dollars windshields. The only issue which everyone talks about is the lack of hardware. I did install mine using riv nuts so 4 bolts and the windshield is on or off and very secure.

Very nice piece. Glass looks very high quality no hardware which seller confirmed on the ad but just by 6 1 7/8clamps and it fits really nice. Great looking product for halfthe price! Very happy!

Top quality windshield !! Can’t beat it for the price. Held up well for some trail riding this weekend. I highly recommend the rivnut gun that everyone else recommended to install it. Makes it an easy , clean & professional install.

Great product easy install did not come with hardware or instructions but it’s pretty easy to figure out you didn’t need high mechanical skill I installed it by myself it would help if you had a second person.

Great for the price if you go through these reviews people tell you what you need for hardware I ordered what someone recommended and it all worked and Fit well other than the frame was damaged (reason for 3 stars) I live very rural so shipping it back would be a lot of hassle if it came perfect condition definitely a 5 star item wish I could get part of the money back from having a damaged item though.

Extremely well packaged and shipped. No hardware included. Best way to attach to cage is nutserts drilled and installed. The lower plastic lip has nutserts on the windshield. But the upper one does not. If you install the nutserts on the upper section it makes removal a lot easier. It is nice that you can remove the lower and upper portions based on temperature and weather. The lower plastic cover can be removed and the factory roof popped up in the front to have it slide and be held between the factory roll cage and the plastic roof if you want while out on a ride. Make sure that you install weather stripping at the top where it meets the factory roof otherwise if it rains it will fling lots of water at you even with the top part installed. If the top is not installed and it starts sprinkling it comes in and hits you right in the face. The upper piece and windshield frame are both made out of aluminum. The lower piece is plastic. You can see in my pictures what it looks like with it all installed or certain ones removed. Makes a night and day difference by just removing the lower and upper pieces for ventilation when it's hot. Even in Arizona desert with the upper and lower removed it makes it very comfortable with air flow

Fits well, I had the order of operations incorrect as I have a SuperATV roof not a Can Am roof. Had to install it in 3 sections, used 1 3/4" cable clamps to mount. 5mm bolts for the top with nylocks and 6mm bolts with nylocks for the cable clamps.

much better then the polly windshield.. glass is strong and easier to clean with less scratches... great price.. worth the money

As it says in ad. No instructions or hardware. Other then that it was easy to install. I temporarily clamped it to get fit right before screwing it in place. Once you have it in place secure glass section first. I got it on sale for less then $400. Canadian. Worth every cent. Design could be better where pieces over lap.

Just as described. Fit well and wasn’t awful to install. Bottom vent rivets stripped during install which made things a bit more difficult. Otherwise really nice quality.

Fits good. Added 2 - 6 mm rivnuts to each side of the roll cage. Added 1/4” foam seal on each side and 1/2” to seal between the top and the roof. 6 mm bolts are perfect to bolt the top piece on with out adding rivnuts.