LockNLube Mini Grease Gun Kit. Includes Our Patented Grease Coupler (Locks on, Stays on, Won't Leak!) Plus a 12 Hose and in-line Hose Swivel.

This is a really nice mini-grease gun, but then again you would expect it to be for the price. That said, I do not regret spending the extra because this one has three really nice features you'll come to appreciate as much as I do: First, it has the locking connector that locks onto the grease fitting ("zerk") you're trying to pump grease into and holds it there, so there's absolutely zero worry about it slipping off just in time for you to pump a string of grease onto your 1) floor, 2) shirt or 3) face. Secondly, it has a swivel fitting for the hose, so regardless of how you have to orient the gun itself or the connector, you don't have to fight the hose twisting up; it just effortlessly orients itself to accommodate you, instead of you having to figure out how to get it where it needs to go. Lastly, they expect you to keep this gun for a long time, so they include a rebuild-kit with new seals to install once the originals give up the ghost, which even with constant use probably wouldn't be for at least 5 years, but it's still a nice touch. Yes, it's a premium tool with a premium price, but if you're anything like me you'll appreciate the quality and thank yourself every time you use it. Highly recommended.

Not the cheapest one on the market but I feel that, so far, it’s been worth it. I wanted a small grease gun for only occasional use. I like the fact that this one, in addition to being well made, came with the flexible hose, a swivel fitting, as well as a locking fitting for clamping onto zerk fittings. They even included a rebuilt kit for the locking fitting! The only knock I’d have is that, given the included instructions warning to not over tighten the fitting going into the gun, a tiny amount of grease seeps out of the threaded junction point. I’ll probably take it apart at some point and give it a couple of wraps of Teflon tape which should take care of it. Aside from that, everything else with the grease gun is great! Worth the price given some of the other less expensive small grease guns I’ve looked at before.

I have had several different models of this small grease gun. All of them were messy to use and load. All of them ended up not working because the tips would get bent or damages and no longer stay on a grease fitting. This grease gun fixes all of that. When you pull the plunger out, you don't have to hope it stays locked into the little notch - this one has a spring loaded piece that turns sideways and securely locks the plunger open. "Un-thread the pump head a few turns and air will not get trapped. Even better, air will escape but grease will not squirt out. The best feature is the locking tip. It stays tight on a fitting and does not leak. Just like other reviewers say - you do not have to over-tighten the hose. Thread it by hand and use a wrench to go about 1 1/2 turn tighter and you are good - it will not leak. Same with the tip.

Really loved this when first used. Worked great! After first tube of grease was used it has never worked again. Tried with various new tubes but it will not prime. Seals went out after using on one project. I have since purchased a cheap $16 one from the hardware store and it has worked so far with over 24 tubes without a problem! Save your money! If your going to buy chinese tools might as well buy the cheapest, they're all the same!

I seldom do reviews. Typically they are either 1 or 5 starts to warrant my time. I am an aerospace engineer and the application was my Jon boat trailer which has Bearing Buddies installed on the hubs. The instructions were very clear and complete and were NOT in Chinglish. They were in plain English and included very helpful diagrams. I purchased the "Mini Grease Gun Kit" Model LNL 156. If you follow the instructions and you should be pleased with the outcome. Special attention to the purging operation (covered in the instructions) which requires slightly unscrewing the barrel to expel the trapped air after installing the min-cartridge. This was essential in my experience. Best of all, there was no mess as I have experienced with inferior products. The LockNLube Coupler was marvelous. This gets a full 5 stars.

So far so good, only ran one cartridge of grease through it.

Initially, I could not get this Grease Gun to pump the grease through it's nozzle. I went online (YouTube) to try to figure out if there was something I could do to get it working. I tried several ideas that was posted, and I finally figured how it works! Nozzles are GREAT!!!!!

This product is perfect for the home mechanic who does their own maintenance and upkeep on their autos. It is the perfect size to get to some of the less than optimal grease nipple locations. I would recommend though that one practices with this product as it has an incredible amount of pressure for its size and it is possible to ruing a grease boot if one is not careful. But over all a fantastic product and highly recommend

Can’t get it to work feels like the spring is not strong enough to work so disappointing given the price

Finally, a small great gun that works and doesn't leak!

Nice to have a grease gun that actually works as it claims. Small,compact,well made and it doesn't leak. Highly recommended.

Product as described

great tool for greasing joints