Glixal ATKS-041 High Performance Racing Variator Kit with 6.5 gram Roller Weights for Chinese Scooter Moped ATV 4-Stroke GY6 50cc 80cc 100cc 139QMB 139QMA Engine Front Clutch

USed on My 2019 Kymco Agility 50, Works perfectly, went from 28-29mph GPS to 34mph Consistently. I've changed the roller with some other weights, but so far the original Kit that this came with has worked perfectly. So 6.5 gram rollers work great. 34mph not bad, but 28-29mph really sucked. Put perhaps 1k miles on it, friends rode it exc. Had no issues at all. Highly recommend. Tried Glixel Dr. Pully clone sliders 7g weights, it only goes 32mph. Still trying to tune for the proper weights but so far these with 6.5g rollers have worked the best.

Works as it should

Seems to be quality I do wish it came with the variator shims necessary to get proper fitment but I can't complain to much given its price point. It's just another purchase to be made... you might get away with using your oem bushing or what ever it's called but I still needed a small shim to get full travel of the belt. I do have a quality complaint they painted the inside of the backing plate so you'll wanna sand that down otherwise you'll wear your rollers flat as it breaks down the paint from regular use. Glixal usually doesn't make small mistakes like this it's not a big one and it's easly remedied with some 800 grit. But it is frustrating cuz it's such a silly one lol. The 6.5 gram rollers is a nice touch though I didn't use them as I've put a big bore kit on it and other mods. So it prefers 8 grams weights but for a close to factory gy6 it would be perfect

Perfect the scooter runs good

Way better than stock even though I purchased separate weights for my riding preference. Seems good quality, 350 or so miles in and not a bit of an issue. Would buy again.

Quality products improved my acceleration

First I must say, the only “performance” aspect of this variator is the roller ramps, that’s the only thing. I’ve been modding all types of CVT scooters and mopeds since I was old enough to ride. 2 stroke and 4 stroke. What I noticed immediately was that the slide bushing on this variator was machined too small for the bore in the variator and had noticeable amounts of “slop”. After 50 miles it’s already garbage. Another thing I immediately noticed is the horrible drivetrain vibrations, from the moment I installed this variator, I felt them at any rpm, and speed. The faster I went the more “rhythmic” and pronounced the vibration became. THIS IS 100% due to poorly measured and machined slide bushing. This is a poorly made part which is weird because usually GLIXAL makes pretty decent stuff. My review matched many others about this variator and honestly I should have listened and bought something else. I will be requesting a refund for this junk product. FACTS: - brand new hi-quality roller weights are already flat spotted after 50 miles. - this variator is already garbage after 50 miles, and honestly it was garbage to begin with. - this variator weighs exactly 300grams without any weights in it, my stock unit weighs 280grams. - the roller ramps are not consistently shaped from one ramp the the next. Which will cause weird variations when variating. DO NOT BUY!!! Save your money and get a name brand like polini or Malossi! This is crap!

Variator has a higher gearing than the stock Tao pony 50 but it seemed geared too high with a loss of low end power especially on hills. I switched back to my stock variator which seems to have more balanced performance thoughout the power range.

Thought my 50cc engine wasn’t performing. Replaced the spark plug and carb. Felt better. Still bogged off the line. Replaced the old variator and rollers with this new one. Wow. Huge difference. No more bogging off the line and up to speed nicely now. The old rollers were sticking I guess and these new rollers move freely. Very happy with this purchase.

Been using this set up for 2 full seasons now without any problems on a geely 50cc scooter. Was a perfect match to the old worn out stock variator. I will buy again if needed. Highly recommend, but do make sure it will work on your scooter. There are so many slight differences between different brand scooters.

Just bought a clapted out Chinese scooter. I wanted faster acceleration. This variator seem better than the OEM one. The thing is I weighted the roller on a scale and the one I received are 8gr not the advertised 6.5gr. since the ones that were there were 5gr. I got not slower accel but definitely less resilience in hill. The variator itself is smooth and progressive and more substantial than the one that came on my Juajei. Just wish they would advertise the real weight.

Très bien

these dont fit 50cc piaggio this one way is too small