ESR for MagSafe Sticker, MagSafe Ring, 2 Pack Metal Ring for Phone case,Universal Magnetic Wireless Charger Conversion Kit for iPhone 17/16/16e/15/14/13/12, Samsung, Google, Black & Silver

I recently purchased the ESR MagSafe Ring (2-Pack) to add MagSafe compatibility to my non-MagSafe phone and case, and I’m extremely impressed! This simple but effective accessory has made wireless charging and magnetic mounting much more convenient. Ultra-Thin & Durable Design At just 0.4mm thick, the rings are super slim and barely noticeable on my phone case. They don’t interfere with wireless charging and maintain a sleek look. The black and silver color options are great for matching different devices or cases. Strong Magnetic Hold Once applied, the MagSafe connection is strong and secure. My phone now attaches firmly to MagSafe chargers, stands, and car mounts without slipping. It works perfectly with my MagSafe wallet and charging pads, just like a built-in MagSafe ring would! Easy to Apply & Universal Compatibility The installation was simple—just peel and stick. ESR includes a guide for precise alignment, ensuring perfect placement for optimal charging and magnetic strength. I’ve tested it on an iPhone 14, Galaxy S23, and even an older case, and it worked flawlessly across all of them. Value for Money Getting two rings in the pack is a great deal! I added one to my phone case and saved the other for a backup or a second device. Compared to buying a new MagSafe case, this is a much more affordable solution. Final Verdict: If you want to add MagSafe compatibility to any phone or case, the ESR MagSafe Ring is an amazing choice. It’s ultra-thin, easy to install, and provides a strong magnetic connection for all MagSafe accessories. Definitely a 5-star purchase!

I have several ESR products from ipad keyboard base, car magsafe with cooling tech, several cases. Three one thing that sucks out is the magnets. They are exceptional. I took the case off my iphone and attached the magsafe ring for a minimal look. Itt takes great forced to pull the magnetic pop socket off or even off the charger. Three is no way that this will fall off off attached to an ESR car charger. I recommend the cooling one. I can hold my ipad and shake the furiously and it will not come off. only complain is I’m still waiting for a pencil that will work with the iPad 13 M2. otherwise, I cannot state how well the ESR products work on the iPhones and on the iPad, I highly recommend you will not be disappointed.

The metal thickness is thicker than I would have liked. I tried places in the inside of the case, which doesn’t work as well as the built-in MagSafe of the phone. That is, my case lets the magnet hold only slightly, so as to not be able to use the mag safe. Using this ring on the inside of the case yields exactly the same results — which I expected, but still disappointing. Why? Because the metal is so thick, putting on the outside of the case is not very appealing. Still, when it is on the outside of the case it work — too well. I cannot simply pull my iPhone 12Pro off the charger, I need two hands to slide it gently off the charger because the magnetic pull is so strong. It looks good, and works too well. But it is very annoying to feel the ring on the back of the phone scratching and snagging things. A MagSafe case would be better.

I have been using this magnetic ring for a couple of months now, and I am very satisfied with it. It is a thin and lightweight ring that sticks to the back of my phone case, and it makes it compatible with MagSafe and other magnetic wireless chargers. It works with any smooth PC or TPU phone case that is less than 4 mm thick, and it does not affect the look or feel of my case. The magnetic ring has a strong and stable hold, and it provides easy place-and-go wireless charging by automatically aligning my phone with the charging coil. The magnetic ring is compatible with iPhones with MagSafe (iPhone 12 series or later) and Samsung Galaxy S10 series or later. I highly recommend this magnetic ring to anyone who wants to upgrade their phone case with MagSafe and enjoy the convenience and benefits of magnetic wireless charging. It is a reliable and affordable device that can enhance your wireless experience and make your phone more versatile and convenient.

Either the glue is incompatible with my case, that being a Spigen Galaxy S22 Ultra Tough Armor with a polycarbonate back (not shown as incompatible material), or it's not strong enough to withstand the connection to ESR's own products (their wireless charging desk and car mounts). While everything holds up it's great! But I've gone through two of these kits now (because I wanted the black ring specifically, bah) trying to get it to stick for more than a week or so and no dice. That being said, I tried epoxy to stick the ring on and that didn't hold either, so I have to wonder about the material of my case in this case (haaah.). Anyway, I love this ecosystem of stuff, I just can't get the damn ring to stick. I'll keep messing around, but it's tough to suggest this exact ring so far. EDIT: brought down to one star. I've done something that would typically be considered highly destructive, a) to prove a point about this adhesive, and b) because I'm gonna paint part of this case anyway for funsies. I took a Dremel and roughed up the paint job on my case to see if it was the coating on it that was causing the ring to fall off (or rather, my phone to fall off the ring). So far, now, it feels stuck on much more solid. Prior to this, the phone would fall off this ring while attached to ESR's own accessories. The instructions plainly state that this ring is for smooth polycarbonate and TPU cases. This case back is smooth, apparently painted, polycarbonate. I'm bringing the rating down even further because, well, even if it's the paint on the case that's the problem, this ring is supposed to be the universal part, and is stated to adhere to the material, as much as I can know about it. I was willing to give the benefit of the doubt that I misread something, but my case is polycarbonate, and this says it works with polycarbonate. There was nothing to misunderstand. Just pony up for the 3M VHB stuff or something, and charge more for these rings. Again, I bought two of these sets and this is what I ended up with. I'll update with my paint job though (⁠☞ﾟ⁠∀ﾟ⁠)⁠☞

⭐⭐⭐⭐ When I realized that the case I purchased wasn't MagSafe-compatible, I was a bit disappointed. However, rather than going through the hassle of returning it, I decided to give this product a try - and I'm so glad I did! Installing it was a breeze, and I was impressed by how well it worked with my non-MagSafe case. The magnet is strong and securely holds my wallet in place. I no longer have to worry about accidentally losing it while on the go. What I appreciate most is the peace of mind it provides. I feel confident that my wallet will stay attached to my phone, even during busy days or when I'm out and about. Overall, this product is a fantastic solution for anyone with a non-MagSafe case who still wants to enjoy the convenience of magnetic accessories. It's easy to use, reliable, and does exactly what it promises. Highly recommend!

I used this to hold a grip ring to my phone and it worked just fine. However, when the phone heats up with charging and I go to remove the ring to mount my phone in my car, the adhesive fails. After a while, I started using a wireless magsafe power bank that lead to the end of my ESR MagSafe ring. It has now completely delaminated from my phone and the adhesive is a mess on both sides. I wish the adhesive was heat resistant.

...not just Samsung and Apple phones can benefit with this! I would say a majority of Qi enabled phones may be able to use this. I currently am using this with my Sony Xperia 1 III, though it took a lot of planning and setup to get it on my case correctly. Because the packaging only includes templates for recent iPhones and Galaxy phones, you're on your own when it comes to any other Qi phone. How I installed this on my phone case was before removing the protective cover on the sticky part, I put the ring on a Qi charging pad making sure not to cover the charging area, placed my phone case on top of that with painters tape to stick the ring onto the case, then placed my phone down to where it would charge. You'd need to leave it there to charge a bit to make sure the charging pad doesn't run into any errors. Afterwards, I would remove the phone, and the case, but the ring would be stuck on the case where it needs to be. Then before taking the protective sheet off the ring is affix the ring to the case and test it a few more times to make sure it's in the correct position before finally sticking it to the case. If you do run into an issue, I found it's still possible to reposition the ring 1 to 2 times before the adhesive starts to get too dirty and loses its stickiness. To remove it, don't pull it off the case. I found removing the case and rolling the ring off works the best. Overall it's been working as expected. It charges on the ESR car vent charging pad, and also on my Samsung Qi charging pad.

Con questo anello ho adattato il mio cover per essere utilizzato con caricabatterie magsafe.Funziona perfettamente e aderisce bene senza staccarsi.L’unico grosso difetto è che il kit in dotazione per attaccarlo nella giusta posizione è fatto non per un cover ma per attaccarlo direttamente al telefono.Infatti ho avuto problemi per metterlo nella giusta posizione in quanto le due parti in plastica che si attaccano alla porta lightning e tengono lo stensil continuavano a staccarsi e quindi ho duvuto attaccarlo un po’ ad occhio. AGGIORNAMENTO: Mi trovo ad aggiornare la mia recensione in quanto senza che me lo aspettassi il servizio clienti dello store mi ha contattato venendo incontro alla mia insoddisfazione e cercando una soluzione.Mi ha fatto molto piacere questo, dimostrando la serietà dell’azienda nel prendersi cura del cliente anche post vendita e cercare di lasciarlo soddisfatto.

The ESR HaloLock Universal Ring is a game-changing accessory that allows you to enjoy the convenience of MagSafe wireless charging on your non-MagSafe compatible phone. With its magnetic design and seamless compatibility with MagSafe chargers, this ring is your ticket to a whole new level of wireless charging convenience. MagSafe Compatible: The standout feature of the HaloLock Universal Ring is its MagSafe compatibility. It works seamlessly with MagSafe chargers, providing you with a secure and efficient wireless charging experience. Magnetic Design: The ring features strong magnets that securely attach to MagSafe chargers, ensuring your phone stays in place during charging. No more fumbling with cables; simply snap your phone onto the charger, and it starts charging instantly. Wireless Charging Conversion Kit: This ring serves as a wireless charging conversion kit for non-MagSafe compatible phones. It brings the benefits of MagSafe charging to a wider range of devices, offering a convenient and cable-free charging solution. Universal Compatibility: The HaloLock Universal Ring is designed to be compatible with a wide range of phone models. Whether you have an iPhone, Android phone, or other smartphones, this ring works with various devices, making it a versatile accessory for all. Easy Installation: The ring is easy to install on your phone, with a peel-and-stick application that securely adheres to the back of your device. It's a seamless and non-intrusive addition that doesn't interfere with your phone's design. Slim and Lightweight: The HaloLock Universal Ring is slim and lightweight, adding minimal bulk to your phone. You can comfortably use your phone with the ring attached, and it won't get in the way of your daily activities. 360-Degree Rotation: The ring is designed with a 360-degree rotation feature, allowing you to adjust the angle of your phone while it's on the charger. You can view your screen in landscape or portrait mode without detaching the ring. Durable and Reliable: Made with high-quality metal and strong magnets, the HaloLock Universal Ring is built to last. It provides a secure and reliable connection to your MagSafe charger, ensuring a stable charging experience. In conclusion, the ESR HaloLock Universal Ring is the perfect accessory for upgrading your non-MagSafe compatible phone to enjoy the benefits of MagSafe wireless charging. With its magnetic design, universal compatibility, and easy installation, this ring transforms your charging experience, making it more convenient and cable-free than ever before. Elevate your wireless charging game with the ESR HaloLock Universal Ring and embrace the future of charging technology!

The ESR MagSafe ring attachment for cellphones is a simple yet highly effective accessory that has greatly enhanced my smartphone experience. This small ring adheres securely to the back of my phone, allowing me to easily align and connect it to MagSafe-compatible accessories such as wireless chargers and magnetic mounts. Its slim design doesn't add any noticeable bulk to my phone, and the adhesive is strong and reliable, ensuring it stays firmly in place without the risk of detachment. The MagSafe ring has proven especially useful when using my phone for GPS navigation while driving. It securely attaches my phone to the car's magnetic mount, keeping it easily accessible for directions without the need to fumble with cumbersome clips or brackets. The strong magnetic connection also ensures my phone stays in place, even on bumpy roads. Additionally, the MagSafe ring is compatible with a wide range of cases, allowing me to maintain my preferred phone protection while enjoying the convenience of MagSafe accessories. Overall, the ESR MagSafe ring attachment is a small but impactful addition to my smartphone setup, simplifying charging and mounting while maintaining the functionality and aesthetics of my device.

Spełnia swoje przeznaczenie

Por error compré placas de acero para aumentar la adherencia para un cargador de tablero, sin embargo, muy pronto me di cuenta que interferían con la carga inalámbrica Éste producto se puede instalar fácilmente pues tiene unas plantillas con las que no puedes equivocarte, y son tanto para android samsung, como para varios modelos de iPhone. No interfieren con la carga y tienen una adherencia magnética superior. Los bordes no cortan y los colores -brillante u opaco- se notan elegantes dependiendo del color de tu teléfono. Habitualmente no escribo reseñas, pero considero que en éste caso es de elemental justicia que lo haga, y espero sea de utilidad para otros compradores