KBS Coatings50040 Headlight Restore Kit

Be sure to do it at night or under dark shade, it will harden quickly, other than that it’s easy to install

Daniel Stern, an online automotive lighting consultant, recommended this product as a permanent way to de-haze my headlight housings.The good: It does its job pretty well.The Bad: You must be careful when applying; This includes wearing gloves when using the sealer in the can as it is sticky and paying particular attention to applying the sealer to the headlight housing. Apply too much, and the result will be sloppy.I recommend buying a secondary foam brush, as the one in the kit didn't last for both headlights.

Very efficient. I was a little skeptical at first base on other products I have used. The kit comes with a little ~2 in. square sponge to clean/rub the headlight, worked perfectly despite the simplistic process. I have use other more expensive products, requiring electric drills for buffing etc. None of that with this product. You clean first, rub the headlight lightly and uniformly, then wash and dry. I advice to use the provided gloves. Then apply the varnish like product with either the spatula type device or brush (I used the brush). Need to apply fairly fast ( I did it from top to bottom) before it gets too hard but you get enough time. The instructions are clear. I was done in about 15-20 min. with both headlights.

Very easy to use works good on headlights also works good as clear coat for fishing lures

seems like a tough coating but had no luck getting the coating to dry smooth , it came with foam and bristle brushes , I tried both . both dried with streaks waste of money in my opinion