Clear Acrylic Display Shelf for Mini Funko Pop, Wooden Display Stand Double-Deck Riser 2 Steps Storage Rack for POP MART SKULLPANDA The Sound Figures Action Toys, 15.55" W x 3.78" D x 10.8" H

I ordered this because it was the correct size to hold the lovely Hummel figurines I received as a Christmas gift. They do fit- but this has not been a good experience. The wooden top and bottom frame of this case are unfinished- not even a clear coat on the soft wood. The case come unassembled, and the plexiglass parts do not line up well. In assembling it, I ended up with several small cracks in the plexiglass. The case does the job- but doesn't look as good as the price would suggest. The added string lights were a nice bonus- but don't make up for the cracks in the case.

The dimensions of this item are wrong. It's listed as 40x10x29cm, but I measured it at 39.25x9.5x27cm. I bought this for my 4.75" Transformer Funko Pops but it was too short. I had to purchase another 3 tier display case from the same seller to fit my takker Funkos. I ended up using it for my Star Wars Funko Pops. As long as your Funko or toy is under 4.5" this is a nice display. The added lights were a nice bonus, but I wish they were white/daylight.Assembly isn't as hard as others made it out to be. Just peel the film, align everything and slowly put it together. Keep in mind this is acrylic and not glass, so just looking at it wrong will scratch the acrylic. Make sure you use a clean microfiber cloth and when cleaning and no abrasive liquids.

I ordered 3 of these.POSITIVES: It was fairly easy to assemble. The clear plastic panels had a protective film you peeled off both sides so they came nice and clean. Looks very nice. Door swings open wide.NEGATIVES:IF you never move the display and only put small, very light things in it you should be fine. BUT if you want to transport, move position, or put more substantial items inside the display you may have some issues/concerns. I bought these for a classroom display of minerals and crystals of various sizes and weight, so I can't put heavier specimens on the top shelf for fear it may bow.Basically the white "boards" are very lightweight and soft, like a tightly compressed paper/foam product rather than particle board or plastic. The concern of it being flimsy was further supported by the 3rd unit coming with that "board" broken in 2 places. ALSO, the clear panel pieces "snap" into the groove gaps in these white base pieces, BUT it felt like there was enough wiggle when assembled that I was worried they would come "un-snapped" if I picked them up without a hand under the bottom. So, I went ahead and used clear Gorilla glue on each side of the "snap-in" points (including the open part of the top and bottom "snap-in" parts) to ensure that picking the display up wouldn't lead to them coming "un-snapped". So, you can compensate for that concern, but you will have to be fine with bead lines of clear glue seen.CAME WITH BROKEN PARTS:The 1st 2 displays in the same Amazon box were assembled with no issue, BUT last display bag came having 3 breaks in 2 damaged parts. This damage made it so I can't assemble it.One side of that bag was torn, and I didn't think anything of it until I got it all out and found it had 2 broken pieces. The bag being damaged tells me that the product was damaged when it was sent to me.SEE ATTACHED PICTURES.The plastic side was the 1st damaged piece, which as a 1.5 inch crack. I figured I'd just glue it and let it go (hence the whitish raised line). HOWEVER, I THEN found that one of the white base panels was broken at the end that holds that broken plastic piece. So, now I can't even put the "fixed" broken piece into the unit because the grove it "snaps" into is broken off. Then the THIRD damage to that same white piece is the beginning of breaking of the corner whole which is ESSENTIAL for holding the door in as a hinge piece.UPDATE: I did get an email from the company for pictures of breakage and address to "courier" replacements. I will see how that goes and update.

With a little fine sanding, walnut stain, and polyurethane coat this display looked great. The materials delivered are a bit raw, but that was what I liked about it. I could customize. Perfect for the first 12.

I used 3M velcro mounts to hang them on the wall. They are great for my 1/35 Wego bots. And the lights are a nice added touch.

It's okay. It is fairly easy to put together but will fall apart if not supported well from the bottom.My biggest reason for 3 stars though is that it didn't mention it came with a protective film on the plastic. It looked like the plastic was foggy and not well made. It wasn't until I was shopping for a replacement and found one that mentioned a protective film. After several minutes I was able to get one off.One bonus though is that it comes with a small string of lights which makes the display look really cool!

One corner came broken from mailing….too difficult for someone in wheelchair to send back just deal with. More sturdy than other I got without wood. But still have to have coordination to put together ;)

This case is amazing! Once you put it together (slightly difficult, but that's where the stability comes from) it is perfect or amiibos or small items you want to display. I actually ended up mounting mine to the wall with 3 L brackets, 1/4" screws, and wall screws (2 on the bottom, 1 on top). I will definitely be purchasing another one in the future!