Shake-N-Break™ Air Impact Screw Remover – Loosens Rusted, Corroded, Over-Tightened Screws – Compatible with Standard .401" Shank Air Hammers – Includes 4 Phillips Bits

This thing works great.Better than expected. If you have Philips head door screws or any tapered head screws then you need this tool.

works great removing screws from brake rotors, satisfied with purchase

Worked great breaking loose hinge screws on a Scout 800. Highly recommended.

Works well, does what it advertises.

No more broken bits for the snap on guy. My old impact driver was great for breaking bits because it only tackled one aspect of a stuck bolt. This tool handles both. Everybody knows heat or vibration are the best ways to bust a tight or rusty screw. But what if you can't use heat? What if the part has a huge thermal mass? Have no fear, vibration is here. Use your favorite penetrating fluid and lightly throttle your air hammer while turning the attached handle. This has worked every time so far and I haven't broken a single bit. 1/4 inch hex opening let's you use adapters for different things like sockets and whatnot but I don't know how well it works in that configuration.

I use these to get out set screws in rusted rotors. Oh boy does it work like a charm!!

In the past I have used the impact drivers, the kind you hit with a hammer then spray more break free oil. WIth his awesome tool, it took seconds to remove four machine screws! Watch vids on how to use it.

Like many others I was struggling with removing seized brake rotor screws on honda, acura, and mazda cars, sometimes resorting to drilling them out to get the rotor off. This product removes them so easily that it is hard to believe. Make sure you turn the air pressure down to around 30-40 psi before using this. Once I mistakenly left it at 90 psi and it turned the screw into mush. lol