Aluminum USB 3.0 Gigabit Ethernet RJ45 Adapter, Plug and Play, Portable, No Drivers Needed, Gray, 1.97 x 0.83 x 0.59 inches

A small USB3.0 adapter, very well made casing. The signal light is white and some may find it too bright, but it can be covered by some semi-transparent tape if it bothers you. It works really well with my raspberry 5 adding an extra gigabit connectivity option. The performance is as expected, compatible with all my devices. The adapter device id is 0b95:1790. It is made in Vietnam and features AX88179 Gigabit Ethernet Controller chip made in Taiwan, so safe and easy to use.

I have a dell notebook computer connected to a dell docking station. they are, apparently, notorious for being lousy at connecting to a cat 5/6 cable for internet/networks. It was constantly disconnecting and causing me endless headaches, so I figured, hey, why not just connect it more directly to the notebook, which did not have it's own RJ45 jack. So I bought this and boom!! All fixed.

It works as advertised. Upgraded my provider Service to 500mbs. Then discovered my PC ethernet card was card was rated at only 100mbs. Solution was this device. Connection way easy. Plugged it in to a USB port and my Ethernet cable and bam!! 500+ mbs all day long. Problem solved. I'm using a windows 11 home version. No drivers needed. No reason have a new ethernet card installed or buy a new PC and pay big bucks to a repair center. I would buy this metal encased version rather than the plastic cased version, for a few dollars more. It is more sturdy.

Bought this to use with an OTG cable and my streaming device. Plugged it in and was recognized immediately. Don't have to rely on Wi-Fi to stream anymore. Only issue is the network light. That tiny little light that shows network activity. It's very bright. Looks like a thunderstorm behind my TV when the lights are out. Will probably get a tiny piece of electrical tape to cover it up.

It worked prefectly

Why a unicorn? Because as far as I know there is no smart-TV that has a gigabit connection natively. And when streaming from my HTPC at 4k I was getting stutter despite the fact that my network is build around Gigabit connection and I've wired it using Cat 7. I had already purchased a USB-Gigabit dongle from a different vendor and while it worked for a while it was constantly loosing the IP address I had assigned. After checking the lease length and the MAC address reservation I gave up after several weeks. I will say that the vendor just gave me a full Amazon credit without any issues. This leads me to believe that they knew there was a problem. Since none of the dongles go into what chip sets they use I had to get creative in my search. I went about this by looking at the positioning of the network lights. If they were in the same place as the one giving me problem I passed on them. The other issue was the case material. The prior unit has a plastic case that would get very warm so I wanted one that had better heat dissipation. The led me to this one. I have had it connected to my network for over 2-months now and I have had 0 issues! Speed tests show at or close to 1 Tb speeds and I have yet to drop a connection. The only thing that is odd is that the MAC address is 02:00:00:00:00:00:00:00 which usually indicates a custom ROM. Since this isn't causing issue on my network I am ignoring it for now. All in all this is a cheap, well made, and stable network dongle to give your TV 1 Tb connectivity for streaming.

I have a Mac Studio. Recently, I purchased an Avid Carbon for my studio, which connects through Ethernet. My original plan was to use Wi-Fi, but since I transfer large files often after a day, it became apparent this solution would only work sometimes. I ordered this adapter. It's high-quality aluminum. I plugged it into a USB hub since most of my ports are being used. It took a minute to be recognized, but now it's working great. Using a hub may not be ideal, but I notice no slowdown in speed. A simple solution to s complex problem!

This is a plug and play component that uses a USB 3 connection to supply Ethernet to a PC or laptop that lacks an RJ45 jack. My gaming rig’s motherboard glitched its network adapter which lost my Ethernet connection. So, it’s time for an upgrade. I’m holding out until Microcenter has a good sale on motherboard combos (likely after thanksgiving), so I needed to shore my rig up until then. That’s why I bought this adapter. It does work well, however… It drops connection periodically. There’s no pattern to it. It only drops for a few seconds. But, when you’re in the middle of a raid on WoW or a serious frag fest, those seconds can seem like an hour! I can’t figure out what’s causing the drops. I’ve gone into device manager to check driver compatibility, rebooted my gateway, double checked my patch cable, checked Windows Update…. …nothing. So, I’m stuck with this, for now. It’s not a bad product, but if you’re on Windows 11, stand by. You may experience the same issue. For an emergency connection, this definitely fills the gap!

Works as expected and provides the speeds needed from a USB3 port.

I bought this for use with a raspberry pi and was a little nervous that it would need a driver and wouldn’t work but it’s been flawless so far. Good points: * Very reasonably priced * No drivers needed, just plug and play * Doesn’t seem to get too hot, even after having been on 24/7 for about a month * Solid materials, with a metal outer casing, not cheap plastic

Cumple su función, velocidad adecuada, limitada a la velocidad del USB que lo conectes. Probado con PC y con una Xiaomi Mi Box y una Mi Box S, funciona perfectamente en todos los dispositivos. Por poner un “pero” las luces que lleva incorporadas para la trasnsferencia de ficheros y para el power, son demasiado brillantes, a veces resultan molestas. Bien en general, su precio lo mejor.

Je suis absolument ravi de mon achat de cet adaptateur USB vers Ethernet ! Dès la première utilisation, j'ai été impressionné par sa simplicité d'installation et sa performance exceptionnelle. **Installation Facile :** L'installation a été un jeu d'enfant. Il m'a suffi de le brancher à mon ordinateur portable et il a été immédiatement reconnu sans nécessiter de pilotes supplémentaires. En quelques secondes, j'étais connecté à Internet via Ethernet, sans aucun souci. **Performance Irréprochable :** La vitesse de connexion est incroyablement stable et rapide. J'ai remarqué une nette amélioration par rapport à ma connexion Wi-Fi, surtout pour les téléchargements volumineux et les jeux en ligne. Plus de latence ni de coupures intempestives, c'est un vrai bonheur ! **Compatibilité Universelle :** J'ai testé cet adaptateur sur plusieurs appareils (Windows, Mac, et même une tablette sous Linux) et il a fonctionné à merveille sur chacun d'eux. Sa compatibilité universelle en fait un accessoire indispensable pour tous ceux qui ont besoin d'une connexion filaire fiable. **Design Compact et Robuste :** Le design est compact et discret, ce qui le rend facile à transporter. De plus, il semble très robuste et bien construit, ce qui est un gage de durabilité. **Conclusion :** En résumé, cet adaptateur USB vers Ethernet est un must-have pour quiconque cherche à améliorer sa connexion Internet. Il est fiable, performant et extrêmement facile à utiliser. Je le recommande vivement à tous ceux qui, comme moi, en ont assez des aléas du Wi-Fi. C'est un investissement qui en vaut vraiment la peine !

El adaptador funciona muy bien para equipos sin entrada ethernet como laptops. Y en velocidad no se nota la diferencia.