Slime 10056 Tube Sealant - 16 oz.

I had a lot of problems with the sealing liquid for the tires (tubeless) of my MTB, until I found this product, very effective, it is enough for 4 tires.

Works great ,I had a small nail in my bicycle tire it plugged up the hole for over a year so far,I always keep a small bottle in my backpack while cycling

Very easy to use, though I had no puncture after filling this in tyres.

I've used Slime in previous bike tires with tubes, and they've saved me from several punctures. (well, still got punctures, just didn't lose air.) I've also used their inner tubes that come with Slime inside, and they worked well. (no flats, so....)This time applying this was pretty difficult, having to remove valve stems and then somehow squeeze in the correct amount of slime per tire.The problem is that there's no clear strip on the bottle to judge amounts. Though I noticed there are some bump like things on the bottle where I could gauge the halfway mark, and if you old bottle up to the light, you can get an estimate of how much is left.It didn't help matters trying to get the clear filler tube out from under the adhesive label. I'm not sure how youre supposed to do this, as the label will not peel off easily.So I got out a little pocket knife and slit the label next to the tube to try to remove it.Got the valve removed, got the tube onto the stem, which was very difficult since you flatten the tires first, and the valve stem pushes into the rim when you try to push the tube onto it.Having to try to hold the valve stem while pushing the tube on is pretty difficult.But I got it on, went to squeeze the stiff bottle that's NOT made for squeezing, and .... Slime poured out of the side of the bottle all over my hands. Yep, I'd accidently put a tiny slit in the bottle while trying to cut the label and get the tube out. Nice.Had to struggle a lot getting the stuff in while holding a rag over the slit. A big mess. And it took several complete squeezes just to get a quarter of a bottle into the tire.Was doing the rear tire and another big squirt of this stuff came out and all over rim and tire. This stuff isn't fun to clean up. ha.But at long last, I got roughly a quarter bottle in both tires as per instructions, and got valves back in and rode a bit to distribute the stuff.I go on faith that this will save me from flats, as I've had luck with it in the past.Lesson: Be very careful if you resort to cutting the label to get the fill tube off the bottle.Could be improved with clear panel with measuring marks on bottle. Making the bottle not to stiff that even if you squeeze it as much as possible, it only squeezes out a small amount, making it necessary to remove the entire tube and bottle, get air back into the bottle, and repeat several times just to get a 1/4 bottle into a tire.

It's Sealed Pumchar Automatically _ Enjoy Your Long Ride Without Worry _One Drawback It's Bit Hard To Install In Tube _ That's Why _ I Put 4 Star _