Stampcolour Waterslide Decal Paper For Inkjet Printer,5 Sheets Clear Water Slide Transfer Paper,Transparent Printable Water Slide Decals 8.5"x11"for DIY Tumbler, Mug, Glass Decals.

Description

Product description Easy printing & application ✔Print a test copy on a normal sheet of paper using the Inkjet printers;Use only 1 sheet at a time to avoid paper jams. ✔Printing settings,Select “glossy” + “best” and Correct size - 8.5x11 inch;Print and let the results dry for 5 minutes. ✔Apply acrylic spray over your image in a well-ventilated space;Let paper dry for 10 minutes or use a hairdryer. ✔Cut your printing paper;Put the image into the water to separate the base paper and the transfer membrane. After 30-60s, remove paper from the water and quickly apply it to the target position. ✔Remove air bubbles and excess water,remove the base paper;Let the decal sit and dry for at least 3 hours or use a hairdryer. Note: Not recommended for any water-absorbing surfaces such as fabric. Not dishwasher safe. Step 1 Printout the picture according to the photo parameters;the mirror side is the printing surface. Step 2 Dry the ink by nature or by hair drier. Step 3 Spray the gloss oil on the pattern surface uniformly. Step 4 Dry the gloss oil by nature or by hair drier. Step 5 Cut it along the periphery by 1mm from the pattern. Step 6 Socak it in water for about 30-60 seconds,then slide the coating and paper adequately by nature. Step 7 Spread the base paper slowly to make the transfer printing coating stick to the product surface. Step 8 Damp and soft the alabaster paper,discharge the bubble and water in the film sufficiently,and then dry the surface by absorbent paper. Step 9 Bake it in the oven for 10-15 minutes at the temperature of 212-230℉(100-110℃)，or dry it by nature for 1-3 days. Step 10 Complete, perfectly designed cup. Review: A must have for crafts - Excellent print quality and easy to transfer. Review: Quality - Good quality worth the money