SPAXT-Star Plus – All-Purpose Screw, Countersunk Head, T, 4Cut, Partial Thread, Stainless Steel A2, 1.4567 – 0197000350303, 0197000400503

This are excellent screws which I used when building a picket fence which may need to be taken down occasionally. The manufacturing quality is top class, and in use the screws do everything they are supposed to. The only quibble I have is that my Torx20 bit tends to get pulled out of the bit holder because the fit into the screw-head is a little tight. Note - these screws are not magnetic, so they don't work with a magnetic bit holder. As far as I know all stainless screws are like this.

Just look closely at one of these screws to see what clever design features are included. The torx head means you should never damage on screwing tight. Often pilot holes and predrilled countersinks are not needed.Used for constructing garden play equipment - I can preassemble and then easily undo all screws for transport before reassembly. Being stainless they don't result in ugly rust stains after a few years use! Well worth the cost.

What can I say, it's a screw.But unlike many screws out there, which are made of cheese, or are as brittle as glass, Spax is a superior screw, and I like the torx head, since it offers greater surface contact with the drive bit, and is less likely to Cam out.If I had one complaint, Spax don't do an English wood screw, slotted or torx head.

Great screws. I used them to fix pieces of 18mm plywood together. After pre-drilling the first piece of wood (3mm) and countersinking the opening, and the screw sat very nicely and the fixing itself is very strong. To add, I recommend using an impact driver strength bit (T15) to fix the screws to avoid any wear.

Look good and go in easily but I had a couple snap at the top of the thread when removing screw to make a small adjustment - thread end still in the post. Not good, too weak.