🔧 Control at Your Fingertips: Elevate Your Automation Game!
The eMylo 433Mhz RF Wireless Remote Control Relay Switch Transmitter with Receiver is a compact and versatile device designed for automation and security applications. It features high-level security with a low repetitive rate, excellent signal sensitivity, and multiple operational modes, making it suitable for a wide range of uses from home automation to industrial control.
K**A
Save $$ by adding your own remote control to motion decoys
After finding the correct wiring for the baby Mojo 2-packs, we were able to wire up four decoys with a receiver linked onto 1 remote.The range we were getting was far greater than we would ever need for our decoy placement. (we did stretch out the antenna outside of the receiver box, which may have increased our range.The only downfall is that the screwdown clamps for each wire seem weak. Wires pulling out and such. To minimize pull on the wire, I've used velcro to attach the receiver to the inside of the decoy. All of the decoys made it through the first day of hunting, but one decoy had to have a wire tightened after the second day.The price difference between the factory installed remote controlled twin pack and the twin pack without remotes is significant, and using these has saved over $200 on the two twin packs.
J**R
Turn off /on any electric device
I don`t like the confusing generic instructions that come with this item. I can tell that just use the right voltage on the first two slots - and+ at your right (6 V or 12v whatever is your remote voltage relay. we have to realize that this relay is what really turn on or off with this 6v or 12v fed on the first two right slots and that is going to control the negative wire in any device of a lamp or motor; NOW the negative cable from the electric source SHOULD BE INTRODUCE in the# 3 slots to the left of the 6v or 12v cable already hook to the first 2 slots of the receiver. THE NEGATIVE CABLE OF THE LAMP OR MOTOR GOES IN THE #4 slot, the control and receiver are already paired . just turn on /off and enjoy.
Z**K
Works okay, but has issues
It works like it should though I was hoping it would work at 5v, but it really needs at least 6v. One thing I really did not like though was the quality of the circuit board. The relay is too big for the board and the terminal block is angled up off the board because of this. Also, the receiver board is jammed up against a transistor. All in all, they could have made the board little bit bigger so the parts fit properly; hence my 4 starts instead of 5.The instruction sheet is definitely a Chinese translation though as they use words that make no sense.But I have used relay boards before so it was not a big deal.
A**R
It is old-school, but it works
Used this to hook a remote to a baby glider bed, so that we don't have to stand up to turn it on and off. What can I say, it is an electro-magnetic relay with an RF receiver attached to it. Programming (switching between momentary/latch/toggle actions) is a little tricky, as you have to wait for a specific number of times for LEDs to blink in a specific way, but I got it on the second try.I wish they would start making these with SSRs, rather than mechanical relays for a quieter and faster operations, though.For the record, glider only had 5V power supply, but it works fine, even though title says 6V.
J**N
Great range and easy to install
Installed in my office to operate a automatic entry gate and prevent getting up and down to manually press a wall switch for deliveries. Great range and easy to install.
M**S
Input voltage levels matter more than the instructions/description indicate
I fried one out with a 9v battery. Maybe I missed something. Bought another because it works really well.
A**R
Works like a charm
I installed this on my old car that has 6 volt system, it works perfectly controlling a fuel solenoid because my fuel system is gravity fed and would over pressurize the carburetor and run on the floor, works like a charm and super easy to install, definitely recommend...
D**L
Works well if you can get through the instructions.
Compact, well constructed remote relay. Perfect for my application.Instructions for pairing the remote not clear. At least for me.
C**S
Looking good so far
Still bench testing reliability. Instructions could be more comprehensive. If you change the mode on the receiver you will need to link back Rx to remote,Tx again. Supply voltage needs to be pretty accurate, tried button cell batteries but would not operate more than a few times before volts dropped too low to get reliable operation. Case is flimsy as you would probably expect for price, I will probably make a hole in front so that operate LEDs visible. Overall pleased with purchase.
K**R
Not for me.
Have purchased several different types of this product but never got one to work yet ...... glad their cheap .KS
M**K
Nicht zu gebrauchten.
Nach 5 Tagen, sind die vier Batterien AAA leer- der Verbraucher war nicht eingeschaltet, nur in Sleep-Modul. Die Funkverbindung nutzen zu viel Saft.Der einen Stern ist zu viel!!!
T**D
pb appairage télécommande
Je crois qu’il y a un petit PB dans les instructions de la documentation si l’on veut appairer une télécommande qu’on a effacée.Le début de la documentation est correct pour effacer et choisir le mode de fonctionnement pour la suite j’ai réussi avec ce qui suit.Il faut appairer de la manière suivante :Appuyer sur le bouton de programmation du récepteur jusqu’à l’allumage de la DEL rouge.Relâcher dès l’allumage de la DEL rouge (la DEL rouge reste allumée)Appuyer sur le bouton de la télécommande que l’on souhaite associer jusqu’à allumage/extinction des DEL rouge et verte.Je suis passé du mode « verrouillé » au mode « momentané ».Tout fonctionne parfaitement.Bon produit facile à utiliser.Pour ma part j’ai câblé le contact normalement ouvert (COM et NO) en dérivation sur un interrupteur qui contrôlait un éclairage de jardin. (Bouton A) en mode « verrouillé ».Et j’ai utilisé deux autres boutons (C et D) pour commander un volet roulant (idem mise en dérivation sur les boutons monté et descente mais en mode « momentané »Le petit bémol c’est l’alimentation en 6v du récepteur. 4 piles de 1,5 v ne suffisent pas. J’ai aussi essayé une pile de 9v associée à un régulateur LM2596 (3€), la pile a tenu 3J.J’ai donc utilisé un adaptateur secteur de 12v connecté au régulateur. Après réglage sur le régulateur de la tension de sortie à 6v, le tout fonctionne parfaitement.
W**B
Ganz ok aber nicht 100pro
Funktioniert ganz passabel doch nicht 100%ig...-die Relais sind recht laut- ich habe erst 2 Empfänger verbaut, dabei ist mir aufgefallen dass einer in der Momentanschalterprogrammierung so lange Strom fliessen lässt wie ich auf den Knopf drücke.... beim anderen Empfänger gibt es nur ein kurzes ein/aus auch wenn ich den Knopf gedrückt halteIch empfehle den Artikel mit dem Hinweis auf die o.g. Eigenheiten jedoch gerne weiter da sehr preisgünstig
Trustpilot
1 week ago
3 weeks ago