HOTLINEGAMES 2Sets 3.0 Plus Rounded Curved Edges Mouse Feet Skates Compatible with Logitech G502 Wireless Gaming Mouse feet Replacement (0.8mm,Glide Feet Pads, White PTFE) Professional Upgrade Kit

I have a Lightspeed G502; noticed the tape on the bottom was peeling off and affecting my mouse movements. I'm always skeptical about buying after market stuff like this, but I was very impressed. I cannot speak to the product's longevity, but they include 2x scates so that's a huge plus. Good: 1. First and foremost this works well. Actually, too well, I had to readjust my DPI because it was moving so much faster on my hard mouse pad and also my cloth pad, about 100DPI to be precise. For that reason it accomplished the goal perfectly. 2. It included a microfiber cloth and 2x pads should the first one die. If this gets a year or two on one, it’ll be great. 3. Very easy to install. And cheep. Bad: 1. It didn’t have tweezers to pull off the existing tape which some of it was very put on. This wasn’t a huge issue for me as another product I bought that same order came with a set that I used. 2. It wasn’t super-duper taped on vs the factory which was 3M heavy duty style tape not a make or break thing but I could tell this might cause it come off faster. Overall it does what you need it to do and is a lot cheaper than getting a new mouse if you already love your current one they support.

I purchased these skates because I needed to remove the factory skates on my logitech superlight pro in order to get access to the scroll wheel inside. I was having a scroll wheel issue due to accumulation of dust and cat hair. Needless to say, the issue was resolved and the new skates felt great. A few months passed and I ran into the scroll wheel issue again but I was hesitant about removing the skates because I didn't want to keep purchasing new skates and replacing the old ones every time I ran into the issue. But after putting up with the issue for a while and almost going crazy, I decided to bite the bullet and go for it as I remember noting that there were 2 replacement skates that came with the original purchase. To my surprise, the skates came off cleanly with some gentle prying and lifting. Whatever adhesive was used did not cling to the mouse and destroy the skates in the process (like the original manufacture skates did). THIS is the reason why I'm giving the skates 5 stars (I would give 6 stars if I could) as the manufacturer's adhesive goes above and beyond and turns the skates from a single use product to something that can survive removal and reapplication to the mouse, allowing someone to continue getting access to the internal hardware of the superlight pro without having to worry about wasting more money on skates every time this is needed. Highly recommended. Would buy again, but don't need to!

The stock skates on the G604 are traaaaash. These skates are much smoother and fit just as good, if not better, than the stock ones. It is also nice that this company makes aftermarket skates for mice that are discontinued like the G604.

So I'll say this - the Logitech G502 already has pretty solid skates on it. It may not always feel like it, but they're good. I got these (and I misapplied the first set - the G502 has two layers of pads underneath, and you have to remove both before you apply these or it won't track accurately - I made this mistake and had to use both sets on my first application - thankfully they give you two sets). I would have really liked if this product came in Black, but since it's the underside of the mouse it doesn't really matter anyway. I'm happy, and $10 for slightly better glide while getting my head blasted off in Tarkov was worth it.

Works exactly as intended and fits the Viper V3 Pro perfectly. I had no issues with it, and the installation process was very easy. For $11.99, it’s a great value, especially with the fast delivery. I’d definitely recommend it if you want an affordable option that gets the job done well.

Bought these to replace the disappointing OEM skates on my MX Master 3S. OEM skates noisy on my hard resin mouse pad and drag on cloth pad. These went on easily and fit perfectly. Glide SO much easier and faster on the cloth mouse pad and much quieter, faster, and smoother on my resin pad, too. Don't know how long they'll hold up, but they are a great value, so I don't anticipate being disappointed.

Let me preface by saying this - I originally received an Off-Brand Product. See Photos on this review showing the off brand versions. The original skates should come in a sealed package with tweezers, wipes, and instructions. The Off-Brand version just comes with Skates and the cleaning cloth. The Off-Brand Skates are poorly cut, very stiff hard plastic and complete trash. I can see based on other photos on this listing some were fooled by the Off-Brand versions. I didn't realize these were Off-Brand until I installed them, wondered why they were so stiff,not making good contact with the mouse pad, and started to do some research on the listing. I noticed he has posted photos of the off-brand product right in the listing so this appears to be a common problem. This was purchased from the Hotline US Store and Fulfilled by Amazon. The sellers own stores products are mixed in with Off-Brand and they don't seem very concerned when I notified them. I received an original when requesting a replacement through amazon. Installation Installation is very easy just make sure to pull the old skates completely off. You may think you have them off but there could still be a film underneath. If you don't see the screw holes on the mouse then you didn't take it fully off. The cleaning cloth helps remove all the old residue and the tweezers are a nice edition to help with install. Skates These have a nice soft yet stiff feel to them and just as good if not better than the OEM Skates. I'm very happy as my old original skates were all greasy and dusty after 6+ years of use. I think the white looks cool even though I'll never see it when using the mouse. They come with a second pair should you need it in the future. Overall I'm very happy with the product. I even ordered some new grips from Hotline US as the rubber has worn away where my thumb rests on the mouse. I'd like to get another year or 2 out of the mouse if possible. I'm a bit disappointed that I originally received an Off-Brand. I hope this review keeps buyers informed to be on the lookout for the differences in the Off-Brand vs authentic versions.

Fits great for the G502 Hero. I IMMEDIATELY felt a difference in quality and ease of movement. The original Skates were worn to the point of making an annoying scratch sound as well as a micro vibration when I moved my mouse across my cloth mousepad. The mouse feels like it weighs less too. I haven't tried to aim or anything yet, but the difference in handling is so noticeable in a good way. Now all I need is for the skates to last. But so far, so great!

These gave my old G502 a new lease on life. Easy to install. Great quality materials. Hard wearing. Excellent feel. Good value.

Swishhhhh. Such function! All gamimg games seeing the boost, white so bright! Sleek, precision cutting, accurate design.

Worst purchase ever, now my mouse is ruined.

I love my Logitech G700S, it's the best mouse I've used, but after almost 10 years of almost constant use and one replacement set of mouse feet later, it really needed a little bit of extra love and care. I took the mouse apart, cleaned it, replaced the left mouse button switch and then went searching for decent mouse feet. All of the feet I found available were cheap and looked it, apart from these. Other replacement feet are thin and have visible surface marks from manufacture. These are much thicker and the surface is smooth. I used a bit of TIM cleaner to remove any dirt and grease from the old, attached feet, and simply stuck these on top as a little extra height helps stop grease build up on the surface and makes it easier to wipe down. I have been using a hard mouse mat ( QPAD - ECR) for years and recently bought a Steel Series Qck cloth pad as a replacement, which I didn't get on with. I now have a Razor Sphex V3 stuck onto a glass plate. The combination of these feet and the Razor pad suit me very well whether it be causal use, but more importantly gaming. The Steel Series pad gives a good, but slightly heavier feel to movement, which isn't for me, but the mouse feet work well and offer a consistent glide on both surfaces. I hope that helps anyone trying to make a choice. There's no need for the supplier to provide two sachets of alcohol wipe, a cloth and tweezers. It's wasteful, but 2 sets of quality mouse pads for £6 a go is good value. If you are walking all day you don't cheap out on footwear so why do the same for your mouse? Delivery was within 2 days and excellent considering I ordered late a night.