EGO Bike Black Motorcycle Luggage Trunk Compatible with Harley Honda Yamaha Suzuki Cruiser Motorcycle Luggage Tour Trunk Tail Box with Top Rack Backrest

I mounted this trunk to a Harley quick release mount for my Softball Slim solo. It sets directly over the rear fender and provides the storage for when I go on long trips. With the quick release mount I can take it off when I get back and switch to the fender rack or passenger seat in seconds. The trunk is light weight but works perfectly for my usage. The included rack need extra work to drill the holes and mount because the trunk lid is not pre marked or drilled for the rack. It is an excellent deal for the price.

I liked the fact that is spacious enough to fit a full-face helmet. It looks good and is easy to install. That said, you have to be mechanically inclined to be able to work any differences from your bike luggage rack and the hardware provided. One thing I would recommend to maker is to drill the holes on the bottom of the trunk evenly horizontally as well as vertically. My luggage rack only has the chrome tubes running from front to back, so I had to use the brackets horizontally (left to right), Unfortunately the brackets provided only fit the holes vertically (front to back) so I had to purchase hardware to make it fit. This can be easily fixed by maker by drilling the holes in a square fashion so hole distance from each other are the same in any direction. One very important thing that made me re-mount this thing, make sure that if your Bike has saddle bags, that they open freely before you secure this trunk, otherwise you'll have to manufacture or purchase a rack mount that can flip the trunk back so you can then open the saddle bags,

REALLY like this trunk Will fit 2 full Size helmets, has a lock and a rack On Top, the backrest is nice for the wife contors around her to keep in place... ( WHAT a shame...lol) installation Was easy. although i drive a 04 Yamaha vstar 1100 so i had to drill holes, because it did Not fit my application of the bike. the trunk Sets On an already existing luggage rack on the bike. If your looking to add a light inside or outside of the luggage rack it has room to do so. there are no reflectors on it either. which you can purchase those on ebay they have different colors. i am placing a 12 volt power outlet in mine for cell Phone chargers. there Were No instructions with this product.

Good product for price, lid support bumpers inside broke off and had to glue back into place.

So nice to have extra storage. My wife says the seat is comfortable. I installed it by slipping hose clamps between the box and the flat brackets that were included and tightened them to the luggage rack on my bike. I put two hose clamps on each side and it's very secure. Hope this idea helps someone. The rack on the top gave me issues. Only 3 of the 4 bolts would thread. I had to make a trip to the hardware store to get a longer bolt. I think it's because the holes have to be drilled perfectly to avoid this issue. I made a paper template to get the holes as close to perfect as I could, but human error prevailed. The rack looks great and is relatively easy to install.

I have used this trunk a few times. It will hold one Full coverage helmet. I have used it to store the Full coverage helmet on overnighters. I have also used it to put my rain suite and jacket. The quality is fairly good for ABS. THIS IS NOT a take it out of the box and mount it Tom your bike. You will need to devise a plate for inside the trunk. Drilling will be necessary. As all Motorcycle riders love to do, you will find yourself making it better, such as some water proofing around the lid with some thin rubber. This is not a HD trunk! If you are a solo rider this is great economical addition. I have a quick release base on mine. The lock is not real great, however I figured a way to keep it more secure.

This is not a heavy duty Harley to pack. It does the job though. Be aware and careful when drilling holes for the top rack. If you drill the holes first, you will quickly realize that the holes don’t lineup absolutely perfect with the rack. It’s close but not perfect. You’re better off to line it up yourself and get close to the pre-marked holes. You’ll save yourself a lot of headache. I didn’t keep the original black color, I sent it down and repainted it as close as possible to my own bikes color. Six cans of spray paint and two cans of clearcoat. Came out really good. Added some additional reflectors for safety. Did have to drill new holes for the mounting system, as they didn’t match up with my rack, but that was no issue. Just a little bit of engineering. I also added an additional support rack of heavy duty, plastic pegboard underneath just to support the bottom of the trunk. Also make sure you look for the keys on the lock, MICN. They will not be in the trunk. They do wrapped the product very well, they will be taped on the inside of the packing box itself. Not inside the trunk.

Holes are easy to drill, and can be located from opening the unit for both bottom mount and rack on top. Smaller than a stock harley tour pak, but MANY hundreds of dollars less. Nice gloss black finish, chrome rack on top is nice. Holds my full face helmet with a bit of room to spare. I'm very happy with it. Well worth the money in my opinion.