PrimaCreator FlexPlate-Powder Coated PEI 310 x 320 mm

Marked position of bed mounting screws that will be below magnetic base, and used a punch to remove material for subsequent access to bed screws after fitting. Plate works very well indeed

Perfec to replace that crappy bed it comes with

The Textrued PEI side is of great quality and always works for me, not so much on the smooth side but I've never had luck with smooth PEI other than on a prusa machine

After a while of gently pulling prints off the stock bed with a few broken attempts I decided to purchase this bed.Works perfectly and both pla and petg.Has really good magnetism so the bed snaps down if your not careful.Been using the textured side only and so far had no bed adhesion issues.

I have these flex plates on 4 printers and would recommend to anyone. PLA and PETG sticks well and releases when cooled down. If I need extra stick I use 3d lack spray.

Great product! Best I've had 😀

I've been using a smooth PEI bed for a year, which worked okay but was showing excessive signs of wear so decided to try and upgrade. When I noticed Prima also make printer beds (I've been using their filament with great results) I had to check it out.The adhesion is the best I've had, I'm yet to have a print lift. The texture is a little courser than I expected but I kind of like it. The steel is super thin and so easy to pop prints off. Cant really say much more other than how happy I am with this bed.Just to note: I'm printing with PLA and the bed is set to 60 degrees.

Works ok as a build plate, PLA, PETG and ABS all adhere well. I print some items which the first layer is seen and the powder coating textured thickness is not as deep as some other build plates I have, changing the visual appearance.