QWORK 12V Car Wireless Winch Electric Remote Control, 2 Pack Universal Mini 5 Wire Control Winch with Dual Manual Matching Transmitter Kit for Truck, ATV and SUV Winch Wireless System

Worked great on HF Badlands 9500. This winch has a slot in the cover for a wireless receiver to be secured and it fit right in there. I did have to cut the terminal ends off the ground and in/out wires. Icrimped on piggy back connectors and installed and tested. Got the polarity right the first time! I then landed the "wired" remote plug onto the piggy backs and everything works. Easy job, and took all of 20 minutes taking my time.

These work fantastic and are cheap for what you get. You won't go to any store local and get a winch controller that works as well for double the money of this one. It is simple to wire up and be on your way. No Issues from using these.

Suffers from 2 big design flaws:1. No indication of whether they are on or off, other than trying to use them2. Less common battery that you need a screw driver to changeThe installation went well, and they worked initially. But when I needed the winch - and when you need a winch you NEED a winch - the batteries on both remotes were dead. Had to hunt down a small phillips head screwdriver to try to change the batteries, just to find that they take a battery I don't have laying around because it's just not a common type like AA or AAA, etc. Had to operate without remotes until I got the proper batteries.When I changed them, things seemed to work fine. I double and triple checked that I turned them off and thought that would be it....until the next time I needed the winch. Guess what? They didn't work again. This time when I changed the battery on one of them it still didn't work.So they're going in the garbage because they never work when I need them.DON'T BUY THESE IF YOU ACTUALLY NEED REMOTES TO WORK WHEN YOU NEED YOUR WINCH.

One of the remotes had a dead battery, so thats kinda lame, but aside from that, this works as it should. If you have one of the older generation harbor freight winches with the square relay box, there is actually a molded slot inside that this unit is designed to fit into. Saw someone in a review somewhere mentioned that this controller doesn't stop immediately when you release the button, and after I tested it, I found that was not the case, and it does turn off as soon as you release the button.

this kit works great. my control box got smashed at a scrap yard making this winch worthless. i installed this this kit and my winch works great now for a fraction of the cost of replacing the control box

I bought this to replace a broken switch on my Badland winch. I also wanted the remote capability while loading and unloading my car. I didn't know if it would work but thought I would give it a try anyway.It was easier than I thought it would actually be. I took the switch handle apart which is on a 5 foot factory cable for the Badland and it had three female spade fittings into the switch. One wire was "IN", another wire was "OUT" and the third was "Power". I cut the ends off of the remote wire and put a male spades on them and they pushed right into the three spades from the factory cable. I added the ground to the battery and everything worked perfectly.I can now stand back much further than needed and operate the winch. Fantastic

Super fast and easy install. You don’t have to remove the factory controller to install this one, just hook up the wires and you have both the wired remote and the wireless. I was done in less than 10 minutes. What a difference!

The first one I bought did not work at all. The second one worked great, so a three star rating.