BOSCH CC2100 5-Piece Chuck Adapter and Bits

Never say neverAdmitteddly, it is a rare event I break out the rather large container barely managing to contain its bounty of all FIVE STARS, but Bosch left me no choice.Why Bosch, there are much cheaperYes, but how do they compare? Let's look at three well-known systems widely available at home improvement centers: Ryobi, Dewalt, and Hitachi and see how they stack up to Bosch's "clic-change" system.[One thru five stars: 1 Star="baxx breaker"; 5Star= a virtual "Godsend"]Hitachi Ryobi Dewalt Bosch 3...............3..................4.................5........Fit 3...............3..................4.................5........Speed* 3...............3..................5.................5........Options 4...............2..................5.................5........Bit Qual------------------------------------------------------------------------- 13............11................18...............20........TOTAL[*ease of operation]5=outstanding4=satisfactory3=questionable1-2=ill-advised or just downright dangerous.Reviewing the chart above you'll notice Hitachi and Ryobi are often neck and neck across several measures. There's a good reason for this. Closer inspection reveals apparently both are manufactured under the same roof or close enough to be considered so. Both Ryobi[psst, ree-oh'-bee] and Hitachi offer a fair amount of "quick change" accessories, and both fall short of the quality we've come to expect from semi-professional grade tools. It appears that neither Ryobi or Hitachi placed much emphasis on this popular accessory, while Dewalt and Bosch to a greater extent with Bosch getting positively obsessive in its execution and Dewalt offering an unstable but mind-numbing array of bits or quick-change accessories.In the field, Hitachi and Ryobi are more difficult to operate due to their physical design and lesser manufacturing tolerances resulting in more wobble than some would find safe or "convenient". Bit quality between these two varied wildly, and testing resulted in a Ryobi Philips #2 shattering while driving a typical 8 x 1-3/4 zinc-based wood screw into poplar and promptly lodging fragments into my index finger. After removing all the blood before the local CSI arrived, I decided the Ryobi tests were concluded. Ryobi's quality continues to wane in an ever-competative and growing line of "home pro" tools.While Hitachi recently introduced some ground-breaking designs in their hand power tools [some would choose different adjectives], it appears they've relegated this accessory to third-party fabricators.Dewalt's system is heartier than either Ryobi or Hitachi, and the physical design allowing Dewalt's system being a bit easier to operate[pun sadly intended]in the field and providing slightly less wobble in use as well. In fact, without Bosch's entry, testing revealed Dewalt's system "satisfactory" when rapid changes are required [often a result of poor planning] while introducing an acceptable level of bit "play". However, Dewalt's bit quality varies grealty as well from type to type [drill/driving/specialty] with many bits providing only acceptable levels of durability and performance. Enter Bosch.Bosch's "Clic-Change" [they even named it!] appears the result of careful planning and more than a passing interest in this now common accessory. The Bosch system catapults quick-change systems into a higher, professional grade than we've come to expect over the years of trying numerous offerings from just about every tool name we've come to know and some we've never heard of [and hopefully never will again]. Their actual quick-change mechanism is shorter in stature yet provides greater bit stability and permits changes you actually look forward to as the fit and finish of the Bosch system is unparalleled by any competitor to date.Each bit slides gracefully into the various holders resulting in a very satisfying solid "clic" sound and feel, locking the bit into position and making the discontinuity of the bit/holder almost stealth-like with virtually no detectable wobble or overall stability [forwards and backwards].THIS is one nice system and the only one tested that is not chiefly manufactured in Asia. Bosch's efforts show. Their investment in this system apparent while jumping from one type to another[drill/driver/specialty] offering many of the "essential" or very commonly deployed bits. Bosch apparently wants to finish first in this race and does so by a very wide margin. You may spend a little more with Bosch, but not prohibitively so, and you're rewarded each and every time you reach for their "clic-change" adaptor. Sometimes you get what you pay for. Sometimes you get a little less.With Bosch's new "clic change" system, you get more than is expected and exactly what you deserve. My Hitachi and Ryobi[yes, ree-oh'-bee] quick-change systems were last seen holding down a savagely abused shop waste container and I'm keeping my Dewalt system on hand for "loaners" or to use in a pinch. But Bosch's clic-change system is never too far away from my workbench or person when I'm on my latest adventure to see what new injuries I can accrue. Kudos to Bosch for demonstrating just how important effort and commitment can be in every facet of our lives, not just in the ones we share, but sometimes in the ones we don't. It is said that one day, Will Shakespeare whilst in the midst of getting the stage prepared, asked a local tradesman for his hammer. The tradesman looked up from his task, wiping the sweat off is brow and looked up at the bejeweled author of great fame and said, "Will, if you want to live to write another play, there are three things you must remember whilst in your pursuit: Don't touch my wife. Don't touch my johnson[level]. But most importantly, don't ever touch my tools!" Ok, maybe that wasn't *exactly* the way the Bard recalls it but every craftsman or tradesman that reads these words knows them well and so it appears, does Bosch.AX~

This bit holder is dead on center and holds the bits very nicely. I have used it with both drill bits and the included screw driver bits with no issue. It seems to be sturdier and easier to use than the Ryobi bit holder that I had been using. The Ryobi bit holder has a bit of a spring "kick" to the release that can send the bit shooting out of the holder when you want to remove it. The Bosch holder has a smoother release action where the collar just slides down without ejecting the bit half way across the room. I find this kind of release easier and quicker although it does lack the "shock and awe" factor associated with flying drill bits.

Forget the bits, which are fine by the way, but forget them anyway. What you are buying here is possibly the best quick change chuck available. Used to be able to grab them at the big box stores, but now have to get them here. I have lost a couple, given several away, but never broken one. Best feature is that this chuck is truly one handed. Most quick change chucks are just a spring loaded ring. Pull it up with one hand and hold it there while you remove and replace the bit with your other hand. This chuck locks open when it ejects the old bit, and locks closed when you insert the new bit. You don’t have to hold onto the ring. Much better mechanism. More secure. You can ont regret owning one.

Pretty good little chuck and certainly less wobble than some of the other solutions out there. It's a stretch to call it wobble-free, though.I'd have been a lot happier if someone had the good sense to build a magnet into the chuck. (Did the bean counters claim that it would raise the selling price too far? Next time, don't listen to them!) All this quick change convenience, but you still have to hold the screw onto the bit. Try installing a couple of 6 ft piano hinges with all those dinky little #4 x 5/8" screws. By the fourth screw you'll be reaching for the trusty straight 1/4" drive with the built-in magnet to complete the job.Net result: Good , convenient idea spoiled by half measures.

I've tried them all. But this is the best! Well engineered with close tolerances, but not sticky at all. This is made for a 3/8 or larger drill chuck. Not a 1/4 inch quick connect. That can be a little confusing. The shank on this is larger than the 1/4 quick connect & should only be used with the old style screw down chuck for straight shanks.Once in place, it's dynamite. The release is intuitive and crisp. Any 1/4 inch quick connect bits are automatically pushed out,…not so far that they fall out,…about 1/4 inch to easily pull the rest of the way out quickly and conveniently. In fact, it allows for a one hand release & removal of the bit. Sweet!There is absolutely no wobble on this at all. Dead on. I run one on my Bosch PS11 variable angle drill and it is a beautiful combination when I want to use quick change bits. Another I run on my Bosch 12v hammer /drill. Great combination.This Bosch quick change also work great on my Milwaukee hammer /drill combo with the traditional hand twist tighten chuck. It will NOT work with the Milwaukee impact or Milwaukee dedicated drill. The M12 Impact has a 1/4 inch mount release and the dedicated drill has its own 1/4 inch quick release already built in.There are two release /locking bearings on the back of the shank. I put a drop of drop of oil on each to keep it protected and in top shape. Recommend this Bosch Click-Change without reservation. And the bits are an extra bonus, especially the square shank for driving concrete and heavier wood speciality screws. A good value and 8$ & free shipping.

I love being able to change bits one-handedly. It's well made and feels as though it will never wear.

Práctico muy útil a la hora de estar cambiando puntas o brocas

La herramienta sirve para lo que te indica, solo para tener un cambio rápido de puntas, la verdad después de un rato ya ni se te hará muy útil, aunque debo admitir que la calidad de la herramienta principal se ve de buena calidad.

What can I say Screwdriver bit from Bosch are just as strong as the Drill - I love that they do not bend nor strip the top of the bit.

Merveilleux