Hosa CMP-110 1/4" TS to 3.5 mm TRS Mono Interconnect Cable, 10 Feet

This was exactly what I needed, a stereo 1/8" to a 1/4" mono plug to send the signal without L/R panning to the mixer. Works excellent. Good quality, not frail.

I use this patch cable to send a stereo signal out of my laptop to a mono 1/4 inch input in a guitar amplifier so that I can practice along with YouTube videos. The cable works great sending the left and right channels to the mono input in the guitar amplifier. I would definitely purchase again.

First, this cable was hard to find and was out of stock when I ordered it. It took several weeks to get it but it was worth it.I like to practice my bass along with solo tracks wearing headphones so I don't disturb the family. This cable runs from my laptop with a 3.5mm jack, which plays the solo track, to a mixer with 1/4" jacks that I have my bass also plugged into on another channel. I plug my headphones into the mixer and get the right mix in my headphones.There's not much to say about the cable except I've been using it now for quite a few months. It is holding up fine, is well shielded, and delivers the audio to my mixer as desired.

This cord was extremely inexpensive, but I am very satisfied with the quality of the item. The cable itself is substantial and not extremely thin and flexible like some designed for travel. I use this to take the headphone output from stereo and send it to a single speaker. The speaker is a three-way with excellent frequency range but still plays mono. This patch cord combines the outputs of both stereo channels into a single mono channel in a balanced manner that loses no musical information. Works as intended.

This cable is great if you're trying to connect/convert any Stereo source to any Mono input and vice versa. I use it to connect a laptop to a direct box and also an aux send from a professional mixer to the line in on a laptop (for recording).Stereo to Mono summing direct boxes cost $70+; this cable is a great alternative for anyone on a budget. Great for connecting iPods and other mp3 players to a mono direct box or line input on a professional mixer.The cable itself has cheap connectors, is thin (size of a normal headphone cord), but VERY flexible. Can't beat it for the price!

It took a while to find this cable. I was looking for something to connect a guitar headphone amp with stereo out to a mono guitar amp input and it works very well. I highly recommend this cable.

Most of the cables found around here with 1/8" stereo to 1/4" mono, such as Disino or Colicoly brands, are only for duplicating a mono signal, to stereo. They state clearly that, if used as a stereo output, to mono input, it could damage the stereo output stage of the device. Scary, to say the least.This Hosa product, on the other hand, states that it can be used both ways. What a relief! A very easy to overlook but key feature. Bought two and I use the for stereo to mono signal summing without worries.

Cable seems well built and works flawlessly for sending a mono signal to a dual output. This is NOT a summing cable and should not be used to drop a stereo signal to mono. This could and probably would result in damage to the stereo amp/pre-amp due to impedance issues. This is to allow a mono signal to be sent to a stereo output where it will output the mono signal on both channels. It works well for the intended purpose.

Nice product

Used this cable to take a line out from a Samson wireless mic receiver and connect to a mixer. Fantastic quality cables. Great sound. No noise. Well made chunky bonding of the cable to the jack. Impressed

La calidad de los materiales es muy buena, y su funcionalidad es justo lo que esperaba

This cable allowed me to plug into my iPad’s 1/8 inch stereo headphone jack to my PA’s 1/4 inch mono jack. It was long enough to reach my drum kit, several feet from the PA mixer. Works great!

Ottimo cavo per mandare, tramite mini jack stereo, nei due canali L ed R lo stesso segnale prelevato da un jack grande mono: proprio quello che mi serviva