DEWALT 20V MAX XR Oscillating Tool Kit with Blades, 3 Speed Cordless Brushless Multitool, Up to 20,000 OPM, LED Light, Battery and Charger Included (DCS356C1)

Too long, didn't read section: It's a jack of all trades and a master at doing plunge cuts while minimizing cutting into things behind what you're cutting out. Blades/accessories tend to be more expensive vs. other types of tools. Be sure to wear hearing protection. 11/4/2025 Update: It has come in quite handy. I'm currently working to replace some rotted areas near the roof of my porch. It was able to make cuts to remove some damaged sections of 1x8, that I couldn't do with my reciprocating saw (though i did use my reciprocating saw to deal with cutting nails.) I found having some "long" blades (long as in distance from the cutting teeth the the pivot point/connector plate) such as the Arrow OSC125JPT-2A (found on Amazon) really helped out. I do give the blade a break when it starts getting hot. Being fairly lightweight makes using it over your head pretty easy. As expected, the included 1.5 Ah battery doesn't last terribly long. If you plan to do a lot of work in a session, I would recommend getting a second battery if you don't already have a spare as waiting an hour or more for a recharge in the middle of a project gets old quick. As I mentioned in the main review section, there's a bit of a learning curve, but once you get the hang of it, you can make some fairly straight cuts with it. Cuts reasonably fast when cutting material less than an inch thick. Original: At the time of this review, it was cheaper to buy it in a kit than by itself. I mainly got this oscillating tool as it gives the ability to plunge cut into things while minimizing cutting into material behind what I'm indenting to cut. Overall, the quality feels reasonably good. I did find that the 12 O clock blade position was a little off on mine, but that's not a deal breaker for me. Changing blades and blade compatibility: The quick change blade mechanism makes blade changes quicker and easier than most other oscillating tools on the market as the retaining bolt does not need to be removed. The blade can also be positioned at multiple angles across one axis. I should mention that while it's compatible with most oscillating tool blades/accessories out there, blade/accessory compatibility is not quite as standardized/universal such as blades for reciprocating saws. There's an adapter included for some that are not compatible with the normal mechanism, but you loose quick change functionality and you also need a 5mm Allen/hex key that's not included. Most blades/accessories advertised as universal fit should work with this tool without the need of an adapter. Info about blades: Blades and other accessories for multi-tools tend to be a bit more expensive than other types of tools out there if you want something above the bargain bin blades/accessories. Based on my research, they also tend to have a shorter lifespan vs. blades/accessories for other types of tools. The kit includes a HCS (high carbon steel) blade for cutting softer materials such as wood and plastic and a bi-metal blade that can tolerate some soft nails, but it will likely quickly start the dull the blade after going though a few nails. If you think you'll frequency be going thru nails or even worse hardened deck or drywall screws, there's carbide blades out there that should survive for longer, but if you're able to cut though a nail/screw using a reciprocating saw or angle grinder, you oscillating tool cutting blades and wallet will thank you. Using the tool to cut: As for performing cutting in wood, I found that it's not bad in terms of vibration and gloves can provide vibration dampening for your hands. Cutting does generate a good deal of noise, so hearing protection is a must. For cutting technique, you want to let the tool do the work, don't try to force it as that can lead to burning the material being cut and also results in heating up the blade more, which will likely shorten its cutting life. You want sweep back and fourth with a light touch. If there's no risk of hitting nails, the blades Japanese style cutting teeth supposedly do a better cutting job for wood. I have some on order and will probably provide an update when they arrive. What the tool excels at: This excels when it comes to making plunge cuts into things while minimizing cutting into things behind what you're cutting out. There's also a optional depth guide that can be purchased to further mitigate cutting material you're trying to avoid cutting into. I feel safer using this to cutting into a wall vs. a reciprocating saw as there's less chance I'll damage something behind the drywall such as a pipe or wire. Choosing the best tool for the job: You can also do things such as sanding or doing a cross cut on a 2x4, but you're likely better off using a mouse sander for sanding and a miter or circular saw will by far provide a faster and straighter cut and the blades on both saws will almost certainly last eons longer than even a set of top notch oscillating tool blades. What I'm saying is just because it can be done be done with an oscillating tool, doesn't mean it should be done on a regular basis if you have a better tool at your disposal for a particular job. Cost cutting that was done: The only things that costs were really cut on are the battery and charger. The included battery is the lowest end offered by DeWalt, a 1.5 Ah battery that has no LEDs for checking charge level. The included charger appears to have a mac charging current output of 1.25 amps. I would have liked to see a 2Ah battery. Conclusion: It's a decent tool with a variety of uses. It can do a variety of cutting of tasks in a pinch, but this won't outshine a circular/miter/reciprocating saw in terms of blade costs and results at tasks those tools are designed for in most cases. I'm rating this 4.5 stars as I was able to get it at a good price.

This thing is awesome. Easy to use and is precise. It comes with a battery and charger which discount places don’t like doing. I’m surprised I waited this long to get one.

This DEWALT 20V MAX XR oscillating tool has been excellent. I use it regularly for my handyman business, and it has plenty of power for cutting, trimming, removing old material, and getting into places where other tools simply won’t fit. The variable-speed trigger gives you great control, blade changes are quick and easy, and the cordless design makes it extremely convenient on the jobsite. It feels solid and well built, just like I expect from DEWALT. Definitely a tool I would recommend to professionals and DIYers alike.

This is one of my favorite tools is very versatile. Price was great and included battery, charger and bag. So far has been performing great. Easy to change blades. The carrying case is sturdy. the included battery is small but the whole package is still a great value.

Great tool. Light weight. Adjustable speed and the "no tool" blade change is fantastic. Such more more convenient than a corded tool. Built in LED lights are perfect for dark corners.

I'm happy overall with the tool. I've been considering buying one for quite a while, and I finally took the plunge. It's going to take some practice to get good with it, and I need to find the right blades for my purposes, but the tool itself is very nice. The only reason I took off a star is that DeWalt tools either come as a tool only, or they come with a charger and batteries. Well, I bought DeWalt because I already have some batteries and way too many chargers.

Great quality and great price.

I bought this DEWALT 20V MAX XR 3-Speed Oscillating Multi-Tool Kit (DCS356C1) as a gift for an older woman in my life, and she absolutely loves it. It’s powerful enough for real projects, but still feels manageable and easy to control, especially with the 3-speed selector and the dual-grip variable-speed trigger, so she can start slow and ramp up only when she wants to. DEWALT The little quality-of-life details really matter: the Quick-Change accessory system makes swapping blades fast, the LED light helps in shadowy corners, and the lock-on/off switch is great for reducing hand fatigue during longer cuts. DEWALT This kit is also a nice “ready to go” bundle: it includes the tool, 20V MAX battery (1.5Ah), charger (DCB107), two blades (wood + wood/metal), and a universal accessory adaptor (so you’re not stuck with one accessory brand). DEWALT If you’re buying this as a gift, I’d only add: consider grabbing an extra pack of blades/sanding pads later, because once they have it, they’ll start finding projects everywhere.

Excelente herramienta, muy potente. De los puntos a considerar es que vibra mucho y si la usas por largos periodos de tiempo puede llegar a molestar (según sé la makita de nueva generación redujo considerablemente la vibración). La he usado pocas veces, pero cuando la he requerido, ha realizado cosas que son imposibles de hacer con otra herramienta (por ejemplo tuve que cortar al raz una tubería de cpvc de 1/2 " , lo hizo en segundos y fue un corte excelente). Viene con una batería de 1.5 volts, que la verdad le have falta fuerza, recomiendo usarla cok una bateria de al menos 2.0v.

As expected from dewalt great product

اصلي ومش صيني مكسيكي وأفضل من المنتج المحلي اللي عندنا صيني ، بس كهربته 110فولت

Très bon produit.

Ótima ferramenta parece desnecessária mas depois de usar não vive mas sem ela