NZXT H510 Elite - Premium Mid-Tower ATX Case PC Gaming Case - Dual-Tempered Glass Panel - Front I/O USB Type-C Port - Vertical GPU Mount - Integrated RGB Lighting - Water-Cooling Ready - White/Black

My son loves it, no issues!!

AMD Ryzen 7 PRO 3700 3.60 GHzNoctua NH-D15S with 1x NF-A15 PWM 140mm Fan (Black)GIGABYTE Z570I AORUS Pro Wifi Mini ITXTEAMGROUP T-Force Vulcan Z DDR4 32GB Kit (2x16GB) 3200MHzSamsung 980 PRO SSD 1TB PCIe NVMe Gen 4Samsung 860 EVO 1TB 2.5 Inch Internal SSDSK Hynix Gold S31 1TB 2.5 Inch Internal SSDWD Black 8TB 3.5 Inch External D10 Game DriveEVGA RTX 3080i FTW3 ULTRA HYBRIDNZXT H210i Mini ITX Tower w/NZXT RGB & Fan Controller2x NF-A15 PWM 140mm Fan (Black) front case mount for Hybrid AIO push1x Noctua NF-F12 PWM 120mm pull fan for Hybrid AIO1x Noctua NF-A12x15 PWM 120mm fan, Rear ExhaustSilverstone SX1000 Platinum 80 PLUS Platinum 1000WJakeface Customs Front grill airflow ModBiggest challenge was fitting the Noctua NH-D15S air cooler. You cannot attach this cooler and then place in the case. You will not be able to screw the MB on properly or attach IO/power cables. Due to my MB and my 24 pin cables a second 140mm fan could not go on the right side of the cooler. Placed a Noctua 120mm slim fan (but 25mm regular fan also fits but I used it to pull air from the radiator). The cooler barely fits with the Chromax covers but it does fit.****Note on center fan install on NH-D15S. If you have tiny hands you may be able to reach in there and attach the clip that holds the fan on the fins on the top, but here is an easier way. Works in this case and others that you can’t reach in over the top to attach the clips to the fins. Before you install the cooler take about 12 inches of dental floss and route it through the rear fan grill holes at the middle/top with each end going through draped over one of the holes and then set aside until cooler install. Once you screw in the cooler, take the 140mm fan with clips attached and the top clip wrap the dental floss around the highest portion of the clip in the middle and tie it together. The floss should now make a loop to the outside of the fan grill and case to the fan clip. Place the fan in position and clip with your hands the bottom clip. Route the floss behind the cooler making sure it is centered on the clip and then slowly pull the floss outside the case and the pull force will make it clip to the cooler.Silverstone 1000x SFX. 24 pin and CPU cable will not reach without custom cable extensions. May be the same for other SFF/X PSUs2x 140 Noctua fans on outside of fan mount push for AIO. Not possible without custom grill mod (From Jakeface customs on Esty). 3080 Hybrid 240 Radiator mounted on inside of fan mount. 1x 120mm Noctua fan in pull attached to AIO.EVGA 3080 Hybrid barely fit. Few mm between GPU and radiator. It would not fit without the grill mod. Place included GPU sag device in before GPU. It clips into the vent holes in PSU shroud.

Everything was perfectly fine when I received it, only issue was one side flap on the bottom of the box was open, but nothing was damaged. probably handling issues with usps.

The media could not be loaded. I think most will agree this is a looker. It's white with a smoke glass face and side revealing all of your glorious RGB innards without obstruction. If you want to see an unobstructed view of all your internal toys this is the case for you.The supplied RGB fans have that floating ring in space look. As much as I like other RGB fans that may be quieter or more efficient moving air, the ring in space is still the most elegant look. The RGB fans also very bright so depending on how you set things up you can have one hell of a light show.Outside of the visual BLING this case also has some solid technical merits. It's very roomy and can fit everything you need inside. If you buy a high end video card that's on the long side don't worry it will fit. If you want to install a water cooler like the NZXT Kraken (the coolest looking water cooler hands down) you can do it. Note! If you do decide to add a water cooler you must add the radiator up front. Testing has shown that this is the most efficient location for a radiator anyway so good call NZXT.Cable management is really good. The white metal band inside the case hides the wiring you don't want to see and gives your install a super clean look. The back side of the case behind the motherboard has many channels that can be used for neatly routing cables.You can fit 3-SATA drives in the drive cage if you need them. The easy way is to remove the drive cage itself, put your drives in and then reinstall.There is a TON of room for your PSU and theirs a removable filter right below it that's easy to remove and clean. I ended up with an 860WATT Corsair in mine but I could have installed any size I wanted with room to spare.The top front of the case has a super clean minimalist yet practical look with your power button, USB port, USB-C port and audio jack all to one side.When this case was 1st released it came without the top fan and the thermal reviews weren't spectacular. Since then NZXT added the top fan and the thermal reviews are now decent. This case is roomy inside which gives you an advantage for keeping devices cool. If bragging to your friends about your case thermals is your bag then maybe this case isn't for you. If your OK with having good thermals game on!BOTTOM LINE: Your buying this case for its appearance. The smoke glass makes the RGB display dominant. Whats really nice is that you didn't sacrifice any practicality to get the look. This is a really solid case.

Un case elegante minimalista y con mucho estilo lo recomiendo llegó en buen estado cabe una ATX z390 y refrigeración líquida radiador de 240ml

this was one of the worst computer cases i've had the misfortune of ever buying. cheaply made, poor quality materials and functional switches (on/off) and more broke or did not function. returned for credit.

IT ARRIVED DAMAGED!

Bought this product from micro center for $80 way over priced on here but it’s a good product