4 Pack 4FT LED Wraparound Light 40W 4 Foot LED Shop Lights for Garage, [2-lamp 32W Fluorescent Equiv.] 4400lm 4000K Wrap Light, Flushmount Office Ceiling Light Fixture ETL Listed

These lights are bright and the covers are solid. A perfect replacement for cfl tube bulb lights with ballasts. They were easy to hang and wire and you can pop the little round ends out and run wires between them to daisy chain them easily. Im actually going to buy more of them to add even more light to my garage so I would absolutely buy them again!

I bought these to replace the el cheapo florescent fixtures in my basement. The installation was very easy. The Mfr provides the wiring nuts and terminal blocks for the electrical connections. I was very impressed with the build quality of the fixture. The way in which the diffuser attaches to the frame is far superior to other fixtures I've used, allowing you to remove and attach the diffuser without fear of cracking or breaking. The light itself is a lot brighter than the 40W fixture it replaced. These lights are definitely worth what I paid for them.

These lights are great and cheap, and I see no difference between Chinese lumens and American. I read some of the one star reviews and here is my response. First, to the reviewer that said the installation instructions were poor. If you do not know how to wire nut a black wire to a black wire, and a white wire to a white wire, then, you should ask your 10 year old daughter to do it. Secondly, they are in fact very bright (daylight value) and were far brighter than the four fluorescents that they replaced, and were about 1/5th the weight. The packaging was perfect and I received mine with no dents and no scratches. One reviewer pointed out that they were shorter that the fluorescents that he was replacing. This is true, about 2.5" shorter. This was no problem for me, mine were all surface mounted, as are a vast majority of this type of "shop light".

After years of having our cars complain about their living conditions, we decided it was time to clean up the garage. So after having the floor professionally ground & coated, putting in spiffy metal cabinets, building new steps & landing, trimming out windows & doors, and applying new paint, it was time to upgrade the lighting so we could actually see something at night. These fixtures sounded pretty good at 4,000 lumens each, so I decided to purchase 8 of them to cover our 670 sq ft garage. With the new motif being grays with Dewalt yellow & black highlights, I thought painting the lights might be fun, so the plain old white became yellow & black as shown in the attached photo. Overall, I like the fixtures. At $20 per, it's hard to argue with the price... although I've only owned them a week and the price for a set of four has now dropped by $10. But that's the luck of the draw with Amazon... prices change. Even so, you get a decent fixture for the money... the main body is metal with the two ends and the diffusing grid made out of plastic, and of course there are two strips of LEDs stuck to the inside of the body with a small power supply in there as well so they can be powered from 120 VAC. They are extremely lightweight and somewhat flexible, but mounting them with a single screw in each end makes them nice and stable. One little oddity is that the plastic ends have two screws placed in the bottom attaching them to the body... but you really need to remove one end to be able to remove the defusing grid so you can mount the fixture, and then once mounted there's no way to get those little screws back in. Fortunately, the ends also "snap" into the body to hold them in place, so there's really no need to put the screws back in. It's just a little odd to have put those screws where they are. Wiring is straightforward. I added a little plastic insert in the standard sized hole provided in the metal body since running wires through a hole in metal is a no-no, although it's pretty low risk. Wire nutting and taping connections on fairly short wires while suspending a 46" fixture a couple of inches from the ceiling is always fun, especially when working on a 13' ceiling on a step ladder, but the trick is to bend a little hook end on the ground wire emanating from the ceiling electrical box so you can hang the fixture from that while connecting hot & neutral, and then letting the fixture hang from those connections to hook up the ground. I mounted the lights using a metal drywall anchor in each end and a single screw in the electrical box, after aligning the lights precisely using my trusty Dewalt laser. Since the fixtures have four little "feet" that are part of the body and extend a tad over 1/8" beyond the main part of the body, I found it was best to place a 2"x2" piece of 1/8" hardboard with a hole drilled in the center as a spacer under each end so that I could tighten the anchor screws without overly bending the body. The only improvement I could suggest would be to offer a version that has double the number of LEDs inside (e.g., four strips rather than two)… along with a properly sized power supply. Although these lights are decent and bright enough to cast a fair amount of light from 13' up, having an option for maybe another $10 each or so to get 8,000 lumens out of each one given all the effort it takes to install a 4" box, run wiring in a dusty attic, and mount and connect each of these things would be pretty nice. That said, bottom line: I like them, especially in yellow & black! That night be another option to consider.

The first time I purchased and mounted this, I tried to guess my way through. A mistake. The instructions really did help make the job easier. I've moved into a 50 year old property where my electrician dad put florscent lights all over the place. After spending about 4 hours trying to make these work (including buying bulbs that are now obsolete), I followed my electrian brother's advice, am slowly decommissioning all of those and replacing them with these. What a difference! A FRACTION of the weight of the old flourscent fixtures wiith their ballasts - I can easily mount these by myself - and much brighter. Plus, the savings on electricity makes this a no brainer. I'm now on my third set. One note: the 2nd and 3rd set I got are structured differently than the first set, which I liked the best. However, they look the same on the outside, and since most of my usage is utility, it's ok with me.

I replaced all 4 of my 15 yr old garage 4-tube florescent (T8) fixtures. The new lights are as bright, if not brighter than the old florescent fixtures using about a third of the energy (40W vs 128W). I liked these enough to buy one more to replace my laundry room florescent fixture. No more replacing (and disposing of) florescent tubes and ballasts! They were easy enough to install even working over my head on a 12-foot ceiling. Light enough to hold with one hand while climbing the ladder, easy to install and wire; also, there were no sharp edges. The diffuser was at times challenging to put back on, but no big deal. Quality is good and I tucked the wires in the junction box so they are out of sight when the lights are on. Very happy with this purchase!

Bought these for my dad as a Christmas present to replace the cheap bulbs we had in the garage that hardly made any light. I opted for these ones specifically because they had the diffusers to help spread the light more (and not as bright to directly look at), and they also can be properly hardwired unlike a lot of the other lights here that can be "hardwired" using a chopped off power cable (at which point you could basically "hardwire" anything). The overall light output is absolutely brilliant, and knocks the old lights out of the water. On top of that, with these new lights being LEDs, I expect them to last many years to come. In addition, the color temperature of these is excellent, it's just right for a workshop/garage space. Overall good lights at a decent price.

I purchased these lights to replace my florescence lights in my closets and laundry room. They were so fantastic that I cold not believe how bright they were . Purchase these you will not be disappointed. They are easy to install and what a difference in lighting. And the customer service reply right away with any questions. So you not only have a well made fantastic product you have a fantastic customer service. A customer Service who really cares, and that is hard to find these days. I would give these a 10 Stars In fact I bought 4 more for my Garage and you can't believe how well you can see everything in your garage with these lights. And I found that you can string them together if you want to put two in a row and there is only one output this way you can cover the whole garage.