Deep Pour Epoxy Resin Kit 3 Quart, Up to 4" Pouring Depth

I’ve always had great success with Promise Epoxy. As long as you weigh out your ratios, it cures well and is reliable. There isn’t any color and it doesn’t smell much at all. Cure time generally is the claimed 72 hours but I’ve found after 48 hours it’s nearly completely set, and rarely will take longer than 72 for a full cure. It accepts dyes, mica powder, and glitter very well without impacting the cure. I did have some challenges with a true large volume deep pour and the epoxy rapidly hardening but I do think that may have been my fault with the mixture. Doing small amounts I’ve always had great success.

I used this for an epoxy river table. It worked great, was crystal clear, and dried hard. A few tips: -This is very thin - it flows like water. If you have any leaks, it may all leak out. I did an initial pour of a small amount and tilted the table so it flowed into all corners and cracks. I let it cure for ~18 hours to partially harden and seal any leaks. Then I poured the rest. -Make sure your table is exactly leveled. This epoxy will level itself fairly perfectly, so any tilt in the table will result in unevenness in the thickness of the epoxy. -This takes a couple of days to "harden". It may be unnecessary, but I gave mine a week before putting it into use. If you are uncertain, save some epoxy in the pot you mixed it in and test its hardness by pushing a fingernail into it. -If you want swirls in tinted epoxy, it needs to be done when the epoxy gels. At the temperature I was working at, it took about 12 hours. I used mica-based tint, and it seemed to settle just a bit. So when I gently stirred the epoxy, it came out with nice swirl patterns. You must do this very slowly or you risk getting bubbles that will not come out. Definitely test on a scrap piece to see how long you need to wait, and how gently you need to swirl. Keep checking on it (and maybe re-mixing) every half hour since the swirl pattern can start to settle out even when the epoxy is gelled. You can also try mixing in another color, but I haven't tried this yet. -be careful of dust. This product is so mirror smooth, any dust landing on sticky epoxy can be visible in the finished product.

Good quality epoxy. Bubble free and superior clarity. I poured an 1 1/2” deep table and it was cured in 4 days @ 70 degrees.

So this is the first time ive ever done any woodworking or epoxy work. I ended up doing a very large table and WOW am I impressed! As long as you read the instructions and do EXACTLY what it says you shouldnt have any issues. Now for the reason of a 4 star... As this was my first time pouring I did about a quarter of an inch pour and had no issues. After drying I then did a 6 gallon pour and waited about 2 weeks. Im not an expert, but I was sure it would take a week max to set. However, after the 2 weeks of waiting the pour was as runny as when I started. I ended up sending them an email about my concern and withing 30 min I got a call from Charlie at their CS. Charlie was so incredibly sincere about the whole thing. Upon investigation there was a mix up and my whole shipment turned out to be curing agent with no resin mixture. Charlie quickly shipped new epoxy to me, free of charge. I later found out I miscalculated how much epoxy I needed so I emailed Charlie to see if I was able to get any sort of discount and of course within minutes I had a reduces invoice in my mailbox. Despite the whole situation, I will 100% be buying more epoxy from you guys (and gals)!!!! Your customer service and product and well... Incredible ;)

In the process of a making a bathroom vanity top, sink and faucet will be added when its cured. As you can see its not finished yet, however we absolutely love love love this product. Made a beautiful table for our doctors office, which resulted in 3 more commissioned tables from our doctor to make for him.. made a cutting board too. We have bought many different expoxy resin products that fell short of complete satisfaction, mostly because of bubbles through out the project and to many of them ruined or set to fast with to much heat. This product is amazing to use! Bubbles are so few and very easy to use. It takes awhile to set up for the 1st 24 hours but once it does its rock solid. We will be buying this product again and again and anyone reading this review and on the fence about buying this product, you won't be disappointed if you do. I dont normally write reviews but this product is to good not to write how wonderful it is.

Purchased this product previously and had no problem with the quality however the last purchase I received had large chunks of crystalized resin in both gallon bottles. Didn't notice this until I had started the pour and had to discard roughly 30% of the resin. Project is still curing so I don't know how this issue will affect the project.

Won’t use anything else… worth every dime.. crystal clear results

This stuff is fantastic. Super long cure time gives any bubbles time to rise out. You do need to think about how you want to do colorants as they can settle during the long cure. Most of the time this stuff doesn't start to gel for 12 to 16 hours. But it can pour deep, and very clear. Cures rock hard after 36 to 48 hours. Resist the urge to mess with it late in the cure, it may not be as hard as you think just yet. Just leave it for several days, it'll get there.

GARBAGE AVOID If I could give this a minus one I would this company is a scam. Please do not buy this. You will ruin all your projects. Look at the video. I attached. It came with hardened bits of epoxy at the bottom. It’s a poor quality. AVOID AT ALL COSTS I lost THOUSANDS OF DOLLARS BECAUSE OF THIS I’ve never had this happen to me I’ve been making furniture for 10 years and this is the first time I’ve ever seen this!!!

pretty good epoxy. i did a deep pour about 2 inches thick and had no issues. when flattening on a CNC after about 2 weeks of curing, it was hard enough to cut without dulling tools, but not soft enoug hto bung up the blades. so i would use it again.

1/3 of both part A bottles were hard chunks and useless. Tried to warm to make useable, and did not work. Contacted seller, did not respond, don't waste your time or money or ruin a project with this junk

Chunks of hardened part B ruined my pour. Checked the label and discovered that both A & B were 2.5 years old!!! Most epoxy has a shelf life of a year...some 6 months, unopened. Ruined 7.5 gallons, including another brand. Pretty bad selling expired product.