Colour Name:1-HP-816B The HOLDPEAK 816B Digital Mini-Sized Anemometer is ideal for outdoor activities such as windsurfing. Flying kites, Aeromodelling and UAV, sailing, surfing, fishing, hiking, shooting, walking,HVAC Duct Airflow etc Specification： Wind speed range: 0.3 to 30 m / s Wind speed accuracy: ± 5% of rdg High resolution: 0.1 m / s ✔Low battery display ✔Manual / Auto power off ✔MAX / Average / Current ✔° C / ° F ✔Backlight ✔Wind chill indicator Package Included: 1 * HOLDPEAK 816B digital mini size anemometer 1 * 3V CR2032 battery 1 * lanyard 1 * Compass 1 * User Manual Warning Tips: When the breeze blows, the 816B handheld anemometer will display a reading of the wind chill indicator instead of the temperature display. If you set the anemometer to 0 mph, the wind reading will be the same as the wind temperature. If you keep the anemometer raised while the breeze is blowing, the temperature reading will be calculated using a formula, replacing the wind reading. There are some tips on how to operate the 816B anemometer 1. Use a coin to open the battery door,install battery. 2. Press "MODE" to power on and "SET" to power off. 3. Set the wind unit: Press "MODE" for 3 seconds, press "SET" and press "MODE" to select and confirm. Notes: At low wind speeds, the rise in temperature is not noticeable.
A**E
Brilliant for the money
One of the cheapest insulation testers on the net, but for the price it's pretty good in all honesty. comes with test leads x 3, one has a large croc clip, and a push on croc clip for one of the probes. Leads are not the greatest, but adequate for the money. Meter zeros correctly when the probes are connected under test in all the insulation ranges (100,250,500,1000v) and when tested with my Calcard calibration card, meg ohm readings are slightly low but within the tolerance specified in the manual, which is in English, not Chinese. Tested on a known good and a known bad 3 phase motor, readings all as expected. It was also supplied with batteries and a carry case. I bought this to replace a Uni-T meter that was not zeroing correctly, and for occasional use should be fine, just remember it is not Megger or Fluke quality though. Good clear display and nice back light, hard plastic holster is a nice addition but is tough to get off, it had stuck slightly to the meter at first. I'm going to buy another for a Xmas prezzy for a mate of mine.
C**H
It works... Kind of? Poor quality!
It works. But the price reflects the quality. You can not see whats on the display head on you have to look at it from the bottom upwards. Which will be a pain when trying to use. If your reading this. Pay the extra few quid like i should of done an get a better one...
A**R
ok
dose job
D**E
Perfect
It is just as described
M**S
Nice little anenometer
Great. Just what I need for, mainly for boating but useful when I am out mountain walking too.
A**R
Don't forget too have it with you
Compact and easy too use
Trustpilot
1 day ago
1 week ago