RBRL Bike Mudguard Bicycle Fender E-Bike Fender Mountain Bike Adjustable Quick Release Patent Design Fits 26", 27.5", 29",Mount on Front Fork,Weight 7.2 Ounces

I have a 3 mile commute to school every week day, and if there's one thing I've learned, rain is a pain in the rear. I would come home on rainy days COVERD by sand in the front and in the back. Now that I have these fenders, I'm mostly clean. I did experience just a teeny tiny amount of sand on my shins, but that's also the part of my body that has the nearest proximity to the road so it could be going lower than the fender. Great product, doesn't feel cheap, feels durable. Easy to install took me about ten minutes, I was worried that the front fender wouldn't fit, but it went right on my cheap little Walmart Bike. Makes the bike look cool in my opinion, but I mainly bought this because I hate sand and I hate it on me. I was actually able to fit this product on my bike with a trailer that's already attached (In the photo, and yes I know my tire is blown). Price seems fair, I needed it and this seemed to be the best choice for me. Great product overall!

It was easy to install and has definitely helped with the rocks and rain that have come. Both are stylish and durable while still being flexible, so they won't break or scuff as easily as metal ones.However one slight annoyance is the front bender's installation. It goes inside the fork and, if the hole is too small like the one on the Aggressor, it'll only fit the smaller pieces and wiggle around a lot, even when tightened by the nut and bolt. So I find myself rearranging the front bender regularly. Rear fender is well secured though.

I put these on a full suspension electric mountain bike with 3" tires. They were very easy to install and look great on the bike. The front fender can be attached permanently or as a quick release. The rear fender is quick release as well. Both are well made and give me confidence they will hold up well out on the trail. I am pleased with this purchase so far and feel like they are priced better than comparable mudguards/fenders. You could easily swap these out to another bike with the quick release levers in about 3 minutes.

I purchased this set to install it on a hard tail mountain bike. The width and thickness were perfect for the 29 inch 3" tires. The biggest problem with this set was the mounting. The front fender is mounted to a hole in fork. The holes can be vastly different and the kit includes only two rubber adapters, neither of which fit. As a result, the front fender was tight enough not to fall out but was still rotating around when riding. I had to constantly adjust the front fender. The rear fender is even worse. There is nothing wrong with the mounting mechanism per se, but there is a problem with the quality of plastic used for the mount. It is very soft and pliable. It is impossible to tighten the rear fender to the point where it doesn't move (in any direction) without breaking something. The little notches on the mount also wear out quickly especially over rough terrain. Its an ok set if it fits your bike but it cannot be used for mountain biking without becoming a hassle.

I liked the two-tone look of this pair of fenders better than others in this price range. They installed easily. Poor quality fenders might crack or chip when they hit something, but these seem very durable and flex or bend on impact. No signs of damage so far from some low speed impacts with bushes and small branches. They will move around and get a little out of alignment if they make contact with something, but it's easy to push them back to parallel with the tire. They keep water and mud from hitting my clothes, which is the reason I bought them.

It was really easy to install, after a week, the back screw that holds the fender just broke in the middle of my ride. I make sure to tight everything up and put it in the correct place, but the design it's weak and having a two parts fender end up not being a good idea

I built an ebike based on a Specialized Pitch expert bike. Its for street and path, maybe some single track. I have no interest in getting wet or being sprayed with any street juices or clods, so fenders were going to be a must. This kit appeared to hit all the right notes. Front fender installed in steerer tube with either with a quick release or bolt. It still seemed to move too easily so I put one wrap of piece of cleaned inner-tube around it and it seems very secure now and doesn't move under normal conditions. If it gets whacked, it moves a bit, but a nudge with the foot and its strait again.The rear was equally flexible in how you install it, and what position it ends up in. I have a bike rack so I wanted it to not touch it or the tire, and I achieved that goal. It doesn't rattle against either no mater what I do. It took a little carving of plastic to get the fender sitting correct around the rear struts holding the rack to the frame, but it came out perfect.The only thing I would change in this kit, would be the rear fender arm where it attaches to the fender. I would modify it to lay almost flat on the fender as a possible position for more flexibility. I almost put mine on the grinder to do that but found another way to make it work. Packing was a little suspect too. I thought I was missing pieces and was going to pack it up again for return, but a found the pieces loose in in the box. Just lucky they didn't fall out in transit.Great kit, great price, highly recommend...

The front fender needs to have a hollow front post to attach. My bike doesn't have that, so no front fender for me.The back fender, however, attaches to the saddle post, and is easy to install and works quite well. It's save my backside from getting wet several times now.