SKITCHPrecision Fast Spin Bearings Set | 8 Pack 608 2RS ABEC 9 Chrome Steel Deep Groove Ball Bearing Set for Skateboards, Longboards, Inline Skates, Scooters | + Washers + Spacers | 8mm x 22mm x 7mm

Yo, these bearings are legit! Came back and bought a second set.Picked up skateboarding for the first time in a while and all the brand name bearings that I am familiar with from the 2000’s haven’t been holding up-one or two skate sessions and noisy and lock up.Been riding these for a month and still smooth. Would recommend trying especially at the price point.

Put these on my board (54mm wheels), I was questioning a little at first because the spin test they didn’t quite all spin exactly the same but they are very fast and smooth. Once broke in the all spin the same on spin test.

So after a nearly 30 year break from skateboarding I ordered me and my wife a couple longboards. The boards are great but the bearings were sticky and after a few outings I knew they had to go. Back when I used to skate as a kid my dad worked for a bearing distributor and I got really fast precision bearings. I saw these bearings and noticed it was a start up company and I like to support new business so I bought two sets for boats boards. When I got home today and popped them in and went out. It was like I went back in time and was on my old Vision Jinx. These bearings are outstanding! I followed my dad into the bearing/power transmission industry so I’ve seen junk and I’ve seen the best and are these are really really good. Roll smooth, no excess vibration and super quiet. I ordered the re-issue yesterday of my old Vision Jinx and ordered another set of SKITCH for the wheels I got for it. Can’t wait to jump back on it and hit the skate park.

Great value! Before installing, I was able to test all four bearings with good free spinning. Somehow when I installed the bearing with wheels into the trucks, I can't tighten up too much to allow the wheels to spin more freely with my Sector 9 Racer wheels. Maybe the spacers provided are a bit shorter. So, when tightening all the way, bearings are being squeezed to make them not freely spin. I am not sure. So, the only solution for me is that I have to unscrew all of four wheels' locknuts about 1/32 ~ 1/16 turns (just a bit but not to let bearing/wheel wobbling) to allow the wheels/bearings to spin more freely. My other longboard's setup using Bone Red bearings with my Sector 9 Steam Roller wheels (with spacers also) doesn't have this kind of issue. I need to tighten down since I am doing a lot of sliding over the hill - any small loosen wheel locknuts with wobbling are not good. However, overall, I think the bearing set is a good value.

These are the first aftermarket bearings I've ever gotten and skated on. I replaced the bearings on my green Chaya Premium rollerskates because it wasn't skating as smooth as my red ones. No issues so far, skating is smooth, feels like I'm gliding, I don't see the need to buy any others. Value for the money is excellent. The skating I do is trail, rink, and jam/dance, with a skate dedicated for each. These bearings were put on the skates I use to trail skate. Everything else on the skates stayed stock.I would purchase again, also from the same seller. Buying experience had no problems and bearings came in two days like I'm used to with prime.

I put these bearings on my wife’s Moxi Lolly skates and they seem to roll easier than the bearings that came stock with the Moxi Lolly. And if you know anything about Moxi skates, you know that they are a quality roller skate.My wife, daughter and I tested our skates to see whose skate would roll the best from a dead stop down a slight decline and my wife’s Moxi Lolly with these bearings won. I was wearing My Sure-Grip skates with stock bearings and my daughter was wearing Moxi Beach Bunny with stock bearings.I will be buying more of these bearings for my daughter and my skates. I will update this review in a few months to evaluate if these bearings hold up over time.

The media could not be loaded. Hate to be the naysayer , but I put these bearings in one wheel to have them a test spin by hand… they stopped, literally in 10 seconds .. with same wheel , I put in Bones Big Balls bearings , the wheel spun for 60 seconds . Idk you be the judge.. idk if bad batch or what.. had to return , wish would have worked out .

Got these for my son’s skateboard that needed rebuilding. Work perfect, the kits comes with all parts needed(bearings, washers, and spacers) for (4) skateboard wheels.