Granite, Marble & Stone Repair Kit - Fix Chips & Defects in Minutes | Restore Tiles & Countertops with Ease | for Quartz Corian Marble or Stone | Flawless Results Every Time | Repair Up to 20 Chips

This stuff really works and cures in a minute. A couple of caveats: 1. Use masking tape to carefully mask off any areas around the repair. If you overfill the repair, the sanding to remove the overfill is tedious. 2. Less is more to prevent overfilling. It's a little confusing as to which syringe to use but I found the ceramic works for quartz. Have not used the acrylic yet. I've done 3 repairs -- 2 on chipped ceramic tile and 1 sizable chip on a quartz countertop. The first repair was overfilled and spread into the grout -- almost impossible to remove after curing, but in this case hardly noticeable. The quartz repair took lots of small pieces of masking tape to prevent overfilling, but came out great. See photo. Highly recommended.

Worked as expected. The only complain is the fact that you cannot get one refill, you have to purchase a whole number of them.

The media could not be loaded. I used the Stowsen Multi-Color Surface Repair Kit to fix deep chips and cracks on my engineering stone vanity in the guest bathroom, and I’m impressed with the results. The kit was incredibly user-friendly, with clear instructions that made the entire process straightforward, even for someone who’s not a DIY expert.The color options included allowed me to perfectly match the repair to the existing stone, making the defect virtually invisible. I was concerned that the repaired area might stand out, but the finish blended seamlessly, and it feels as smooth as the original surface.I also appreciate the durability of the repair; it’s held up well with daily use and looks just as good as the day I applied it. This kit is a must-have for anyone looking to fix chips or minor defects on stone surfaces. It’s cost-effective, easy to use, and delivers professional-quality results. Highly recommend!

Like other reviews of this product. Expect something missing and possibly have other items not related to the product. I received a hose washer that will come in handy this spring when I hook up the outside water hoses. Didn't want to take a chance and send everything back when all I needed was a way to hold the red filter in place. Being a saver of stuff for later use (OK I'M PROBABLY A HOARDER), I used a big soft spongy rubber washer with sticky side holding the red filter on the uv light. Worked fine for my needs. Used to fill small pin holes and slightly bigger chips in acrylic tub. Color match not close but acceptable for me. Would like partial refund because of missing part to secure filter, but probably won't get one. It has been two weeks since repair and the pictures are of today and the repairs are solid.

First of all, this is not easy to use. I can see if you use it a few times, you will get better. Second of all, if you use it to fill travertine holes, the crack still shows up. I could see that it might work a bit better on a chip out of marble. For travertine, get the paste and just fill the hole.....works a whole lot better.

Our granite had a fairly large chip next to the sink. The clear epoxy fixed it seamlessly and it took less than 5 minutes. Longest part of making the repair was reading the directions.

I read reviews before buying this. Then I bought it and prepared. Followed directions, read them about seven times before trying. Put clear packing tape over the spot needing repair. Matched my color on top of the tape. Threw out tape and sampling. Knew I had a perfect color match with the Dark White choice. Kit has about six or seven tubes with different colors and ability to mix further if needed. I fortunately did not have to mix. Repaired two small chips in my composite white sink basin. You have to know where they were to find them! Very nice repair! Extremely pleased.

A while ago I had to cut off a faucet handle with a saws-all. The result was the darker picture with the cuts.The Good:This repair saved me about $1000 and the labor of me replacing the countertop. It blends well and seems to be pretty solid. Easy is an understatement. If you do it in layers it works best in larger areas. Just keep building it up/curing/sanding. You'll get there.While this is a great product I was disappointed because the UV light that came with it to cure the stuff was defective. I could only use setting 3. Setting 1 and 2 would shut off. This resulted in me hitting it with the light probably 10 times longer than I would have had to iff the thing worked right. Also, who knows if the cure strength is different?All-in-all $50 vs $1000, I'll take this any damn day.Oh, and I tried buffing with the enclosed buffer wheel and my 30,000 rpm Dremel. That's WAY TOO FAST. Just burns stuff up. Use a low RPM tool, or it might not need buffing.