Car Door Entry Guards

I didn’t use this for car door edging. I used it to edge DIY lids for aquariums. I made the lids out of twinwall polycarbonate which provide rigidity and allow 80% of light through. One drawback is that the airspace of the twinwall is exposed at the ends and water will get inside. I used this tape to seal the edges. It is crystal clear, completely waterproof and sticks well to the polycarbonate. The lid looks fabulous on my rimless tank and does not detract from the “glass box” look. I’ll be making this style for all future fish tanks. I did let it cure after application for 24 hours before exposing it to the wet environment. It sticks well, but you can also remove it without leaving an adhesive residue. I’m finding all sorts of uses for this tape now. It’s silicone under a shiny clear flexible and slightly stretchy plastic. It’s so clear that it doesn’t detract from the appearance of anything I’ve used it on. I have an old 1960s metal fishtank hood and I kept cutting my hand on the sheet metal. I used this tape to edge the sharp edges and now I don’t get cut. And it doesn’t look bad. Previously, I might have chosen electrical tape, but this is a much better solution. I’ve used it to edge glass And patch a pinhole on an inflatable plastic alpaca. It’s: Crystal clear - surprisingly so 100% waterproof Sticks to a variety of surfaces Doesn’t leave a residue when removed Provides slight thickness and padding Easy to apply Conforms around gentle curves Easy to cut Can be repositioned before you press it down I don’t need to edge any car doors, but aside from a possible challenge to apply it straight (it is basically tape after all), I think it would work fine.

I got this because my dog keeps scratching up the paint to look out the window. This was so easy to press down and adhere. You can't even see that it is on the ledges. Don't forget to clean the ledges very thoroughly first. I got some dust on one, and it would not come off the tape.

Not the easiest to work with because cars have curves and this does not curve. Is it beautiful? No but it isn’t terribly visible unless you’re looking right at it. Does it seem durable? Yes. I will update once it has been some time though. I will also say that one roll was not enough for the thresholds of all 4 doors of my suv. I have to buy another roll to do the last door.

Terrible. Impossible to cut. Just sticks to scissors or knife. Hard to put on and SO thick you can't use more than 1 piece like to make wider or around a curve as it shows terribly. I took it off immediately and it peeled my paint off my bumper. Terrible.

Product is good BUT difficult to install without the bubbles forming underneath. Tried different ways with NO LUCK.

We recently bought a new house and our dog keeps scratching at the sliding back door. We purchased this to put along the metal part of the door to prevent the dog from scratching the paint off. So far works perfect for that and has not peeled off. Great quality and you can’t even tell it’s there.

Highly recommend!

Excelente calidad

Fantastic Product would recommend. Sticks and even with the heavy rain does not come off.

Good

Its strong double sided tape not for use as protective strip for the car.

Easy to apply and offers great protection

Not an exciting thing but the thick flexible clear tape does exactly what it is supposed to do, and one year on, it is still in place.