TotalMount Hole-Free Remote Holder

This remote holder is exactly what I needed—no drilling, no damage, and no more lost remotes. The adhesive is strong and reliable, and the design is sleek enough to blend into any room. I mounted it on the side of my nightstand and instantly felt the upgrade in my bedtime comfort ritual. It holds multiple remotes securely, and the installation took less than a minute. If you’re tired of remotes slipping between cushions or cluttering your space, this is a small but mighty fix. It’s become part of my daily setup—practical, clean, and surprisingly satisfying.

This is perfect for my camper. Attached it to the wall on the side of the couch and now I dont have to worry about kids losing the remotes while camping. Super light easy to install fits all my remotes and looks nice next to my couch. Not to thick and holds every remote i have and sticks well to the wall

Arrived in perfect condition and was very easy to install. I followed the instructions and waited the recommended time before using it, and once attached, the hold is strong and secure. I use it to store my remote controls and phone, and it works great. The open space at the bottom for the charging cable is a big plus it allows my phone to charge while staying neatly in place. Overall, this is a very convenient and practical bedside organizer. Would definitely recommend.

I like it . Holds my remotes and phone and I can charge my while it’s in the holder A1 I can’t complain easy to put up I have two of them one and my stream set up and one at my bed I’m going my yo end up buying another for my living room

This remote holder is exactly what I needed for a clean setup. It mounts securely without requiring any drilling, and the adhesive is surprisingly strong — it hasn’t budged at all. The design looks great, the black finish matches my other gear, and it easily fits multiple remotes without feeling cramped. Installation was quick and simple, and it keeps everything organized and easy to reach. A perfect solution if you want a tidy setup without putting holes in your wall. Update: The mount itself is still a good product — the design is solid, it looks great, and it keeps everything organized just like I wanted. However, the included Command strips did not hold up. The holder eventually fell off the wall, which was disappointing considering how secure it seemed at first. I still like the mount, but the adhesive strips definitely need improvement or replacement to ensure long‑term stability.

Ezpz just make sure you find a stud and don’t put it in a bad part of your wall. Naturally adhesive is strong and holds weight as advertised. Size and storage isn’t as much as you might think so check the measurements for yourself to see if it will meet your needs. Very sturdy, but before use let sit 24 hours, adhesive only works, but can use the screws too if you know what part of the wall to use. Enough storage capacity for my use. Remotes and phone. Use wisely when installing. Cleans easy but picks up dust particles

This is for the "TotalMount Hole-Free Remote Holder". There's a whole ton of different TotalMount remote holders on Amazon here and they can be kind of confusing. This is the one I wanted and it holds 2-3 remotes. The one that's 2x6 inches. It attaches a little differently by screwing or sticking a plastic mounting plate to the wall. The holder bit then slides into it. Because of this setup, it's not rock solid, it shifts around a little if you twist on it if that's a concern. The plus side is you can slide it right off the wall if you need clearance to move things around like in an RV which is where I installed mine. Now the main reason I wanted this one is it doesn't have that goofy rounded bump in the base to slide your remotes to the front. You have the full range of the "cup" to work with. So you can really pack remotes in here real good. Or in my case, a phone in a bulky case on one side and a remote on the other. There's a divider that you can remove all together, or set to three positions. But all of them are to the right. There is no center half/half option. You can only choose how fat or skinny you want the right pocket to be. If you attach with screws be very careful because of how the backing plate is designed. It's not solid plastic so it can be very easy to over tighten and crack the plastic. You'll see it flex when you start to get close. Looks very sharp. But like all shiny black plastic, it shows ever smudge that gets on it.

Does what it needs to do. Sticks to wall as of right now, but we will see.

Perfect

Excelente calidad muy bueno recomendado 100 %

Me gustó mucho, se ve de buena calidad y fue de los pocos que encontré como para poner 3 controles con separador.

Great product! Easy to install. We opted to use the screws as we installed in on our porch (brick)

The product is exactly right for the space on my wall, and it keeps the remotes together and accessible.