Supershieldz (3 Pack) Designed for Samsung Galaxy Tab A 8.0 (2019) (SM-T290 Model only) Screen Protector, High Definition Clear Shield (PET)

Protect well, decent price, easy enough to install. Touch sensitivity seems good, fit is accurate. No bubble issues

When I purchased this tablet about 5 years ago, I skipped applying a screen protector because the screen glass was supposed to be so superior. I did add a rubber boot on the back because I thought the glass-like back was too slippery to hold. Although this was an inside tablet, I took it outside one day to stream some audio while doing some light landscaping, To keep the tablet safe -- I thought -- I turned it face down on smooth concrete, after brushing it off. Unfortunately, there was a piece of grit about the mass of 6 pieces of sand that I must have missed. It put a pinhead whole in the upper left corner and a crack ran in both directions. Fortunately it did affect the display characteristic. I immediately applied a piece of heavy packing tape across the corner which fortunately stopped the problem from getting worse. When I saw this screen protector specifically for this old tablet, I thought it would be a good idea to finally provide more protection than I had done with the packing tape. Fortunately, the tape came off without any residue. I consider this Super Shieldz screen protector to be excellent and superior to some others I have used. It is flexible plastic versus the thin glass. I considered that to be a better option for me to work the film across the crack. The screen protector is the traditional approach with clean peel away films on both sides. It was exact size for my screen with hole in the right place for the camera. I appreciated the three pieces of positioning taps to hold the end of the screen in place while I cleaned the glass one last time and removed dust with the supplied 'no residue' sticky circle. I rolled the screen into place, purging air bubbles along the way. Prior to letting the full length of the protector drop, I lifted it a couple of times to clear a spec of something. Nice that their dust removal sticky circle did not adhere to adhesive side of the protector. There are three full kits of screen protector and application supplies in this package. TBD if I will need those too because I think this first one -- with excellent touch response -- should last a long time. So if you wisely need a screen protector for your tablet, whether brand new or years old, I suggest you track down this Super Shieldz brand.

Very good. Bought these for an 8inch mobicel tablet. They fit well, just had to cut the corners a bit rounder. I'm sure they fit their intended tablet perfectly.

Yes nice protectecters but hard to put on

What it includes: 3 screen protectors, 1 dust cloth, and 1 cardboard squeegee. Each screen protector comes sandwiched between two protective sheets that are numbered in order of removal (#1 exposes bottom adhesive side and #2 simply protects the top during installation). Supershieldz recommends watching their installation video on their website, which does helpfully show how to prepare the screen and deal with a dust particle trapped after installation. I’ve used this screen protector brand before for a Samsung phone and have had good results. Lacking in this kit (which the smartphone kit had) is an alignment process, which makes installation much less aggravating. However, a simple strip of masking tape works nearly as well. Before removing the #1 protective sheet (adhesive side), align the shield protector where you want it, making sure the adhesive layer is face down (facing the screen). On the side that has the protective sheet pull tabs, apply a strip of masking tape so that about half is on the screen protector and the other half is able to fold over onto the tablet. Note: avoid covering the #1 pull tab, as you will need this free to pull off the adhesive side. The #2 tab can be covered with the masking tape. This creates a hinge that takes the guesswork out of alignment. Once you’re satisfied with the alignment, fold over the protector and clean the screen one last time. Then peel the #1 adhesive-side protective layer a few inches before folding the shield protector back onto the screen. Let the hinge do the alignment for you as you continue peeling the #1 layer back. Hope this helps.

These 2 pack was ok. Quiet clear, jus wat I expected.

Overall a very good value, with four stars in the "Ease Of Installation" category simply because I seem to have more of a problem with tiny dust motes getting trapped under the film than I do with the glass covers. They don't interfere with the touch functions and the can barely be seen, but they're still there. Otherwise, perfect. If you want to protect your screen without adding to the overall thickness of the tablet, this will do it for you. Just take extraordinary dust precautions when installing it. .

After receiving the item, I changed my mind and wanted to return it because it is thinner than I thought. However, the site doesn't let me do it even it says "FREE RETURN". I was transferred to customer service, added extra steps to the return process, so I gave up. Installation was very smooth, did not have any doubles under the film. As I said, the film is very thin, don't know how it can protect the screen, but at least it seems to protect it from light scratches.

Adhiere mayor protección a la tablet si se pretender entregar a un menor obviamente complementado con su protector se uso rudo

Probably for scratches but it's not glass in terms of protection and usability. I've returned mine.

There is a reason that these come in 3s which is the fact that you are going to waste at least one in installation. The cloth that comes with it makes it very hard to remove dust as it adds dust from its fibres. It does not not have any wet or dry wipes beside the cloth. First sticker came off when removing the second label. Which left me with 2 for 2 tablets. I did manage to install the second, for the first time in my life to install a sticker with bubbles. Peeled of the second label to find the worst texture and feel of a protective sticker to ever use. Buying new ones..

You’re pretty much buying one screen protector since it’s a nightmare to install. The first one came off as I removed the layer tagged as #2 and once that happens it’s impossible to get rid of bubbles and dust particles. The second one I had to adjust and since these are the exact size of the screen, it emds up on the lip even if slightly off and again once you adjust dust sneaks in. Finally, managed to install the third one but was a nightmare. All screen protectors I’ve used on my iPad or iPhone are smaller than the actual display so that you don’t catch the lip or the display and also can easlily push air bubbles toward and out of the edges.

Llegó en tiempo y forma... Excelentes condiciones