Pipishell Full Motion TV Monitor Wall Mount Bracket Swivel Tilt Extension Rotation for Echo Show 21/15 and Most 13-42 Inch LED LCD Flat Curved Screen TVs & Monitors, Max VESA 200x200mm up to 44lbs

Update, September 10, 2022: Tragically, this mount does not work with my brand new Hisense 40 inch TV, 40A4G, which uses a 100 x 200 mm bracket size. When adjusting the arms vertically to fit the new shape of the holes, unfortunately the bracket comes up about 3 to 4 mm short, and thus cannot be used with this new TV. There may have been some warping or deformation that was caused as a result of being attached to my previous TV which died due to a lightning storm a couple weeks ago, for the past year and a half. I’m not sure whether to get another identical mount, or another brand that this new TV can work with.It’s sad that this mount has not been able to fulfill my requirement here, even though it’s served me well in the past, of course I’m not saying it hasn’t. It’s just disappointing.Original review, posted February 2021:After I got a chair to replace my bed (the end goal being to maximize the amount of space in my room), it followed that I would wish to have something with which I could sit back and relax, and continuously watch in comfort. So, I went on Amazon looking for mounts. I found one! It was the least expensive mount that I had seen in my short amount of research, but it seems to be a very high manufacture quality, which I would expect when I trust a very expensive piece of hardware, as well as one of my game consoles and my dresser, to several somewhat heavy, shaped pieces of steel and metal bolts.What you're seeing right now in my pictures, is a Samsung 2013 series F5500, 40 inch Smart TV, with a 200x200 VESA mounting pattern. As you are probably aware from reading the product description, this is about on the outer limit of what this mount can support (it says that it supports up to 42 inches, and up to 200x200). I do not detect any difficulties in the continuing stability of the mount, after I have had this mounted for about a couple weeks. There was a bit of “iffiness” until I discovered through some research that cracks and pops coming from the TV were perfectly natural parts of operation as internal casings heated and cooled down.I have to say this, though: make sure you have the mounting bracket, which attaches directly to the TV, facing the right direction. I didn't, the first time I installed it, and was wondering why it was not flush against the TV; I took a second look at the instructions and flipped the bracket. I am happy that was solved, but in order to conceal the bolts which screwed into the VESA ports, I had to use the thickest spacers that were provided, with the thickest and longest bolts provided (M8). Everything's all flush now, and all the threadings of the bolts have caught and hold properly, like, well, an iron grip.You might notice that the top of the mount plate which connects directly to the wall is not entirely flush with the wall, and this is due to the pilot hole I drilled not being absolutely parallel with the floor, pointing about half a millimeter or so up. I'm able to get my fingernail under that part, but that's it, and as you can see, the bottom is completely flush and there are no difficulties; no threading is lost (or will be lost, I'm feeling) on the lag screws.While I mentioned lag screws, let me go into a little bit of a rant as to what I've noticed people complaining about on their one- or two- star reviews, that the mounts they received were not stable and extremely wobbly, in fact. As per the instructions and as is repeated multiple times in the product information, and as you see everywhere on the Internet when dealing with these things, you cannot mount this kind of thing directly into drywall! You must use a wall stud, which is a plank that was used in the building of your house, most likely! There are plastic concrete anchors provided, which you should use if you have concrete or brick walls, but they must not be used with the drywall! For my part I am supremely confident that I found the stud, avoided drilling into any live wires, and secured the lag screws (which have extremely deep and widely spaced – and thus very strong – threadings) flush against my drywall into my stud (except for what you see above).For one of my pictures I focused on a certain bolt in the middle of the mount arm, which along with the one on the bottom which cannot be seen, is not one of those that we connect ourselves, but came that way. I identified this as the most load-bearing bolt of the whole assembly, and it remains flush, and I feel assured of its stability as well.The only thing that I might have a particular problem with, is one that others have noted as well; and that is the method by which the mounting bracket attaches to the mount arm, via two screws. This also handles the level of tilt presented by the mount, as far down as 15° and as far up as 5° from the center. After finding the sweet spot of tilt, I tightened the screws, making sure the washers were in their places as well, and the TV has not moved since. I see no further need to adjust the tilt, so I see no problem with this in the long run.Thank you, Pipishell, for manufacturing this amazing tool which helps me to expand my entertainment options in my bedroom! I look forward to watching my TV mounted for years and years to come!EDIT 3-21-2022: A year and a couple months out, and still no issues! Pipishell makes some great products, gotta say! In a few months I must replace this aging TV, however, as it has developed a dark spot in its LEDs in the upper left. I have little doubt that, because I'll be using a TV of the same size and mounting standard (this one, unless they run all the way out of stock by the time I'm ready to purchase it, in which case I'll find another: https://www.amazon.com/dp/B07TTF3HJ3/ ), this mount will give me no problems.Thank you again, Pipishell! Again highly recommended!

I was recently voted top 20 most "Un-Handy Man in America". However I was able to get my TV up and mounted with the TV mount in under 10 minutes. The directions actually made sense and were easy to follow. It even came with hardware for different versions of TV's and was labelled and packaged in way that even I could follow. Love the ability to swivel, tilt... the TV for best viewing. Highly recommend!

I purchased this mount to place one of my monitors above the current one I am using, as I needed more desk space. The design is pretty hefty and will most definitely hold up any small sized monitor even TV. I would definitely recommend this to anyone and will probably buy from this company again for other mounts.

Listen, this mount is pretty robust. Solid construction. The lag screws are plenty long for a secure mount. They send a crap load of hardware to fit the many different style of tvs. It can be overwhelming trying to sort all of it out for what you need. You really have to sit down and look at what you need for YOUR INSTALL. Give this process some patience. The actual connection of the TV to the mount IS MONUMENTAL, IF YOU DONT HAVE A HELPER. MAYBE 2. The flaw that I find in this mount, is that unlike many other mounts, you can't just hang it up on the wall mount and then add whatever screws or volts to fix it to the TV by yourself. Once you line this particular mount up with the tv, you have to hold it in place while another person screw in the bolts. So save yourself the trouble (that I DIDN'T) and get a HELPER. You'll thank me later. Once it's installed, It's nice! Ohhh on more thing, I put a 40inch Insignia Fire tv on this mount. I wouldn't put anything bigger. You can, but I would question the small mounting bolts ability to handle the weight adequately over time. The bolts are very big at all.

I recently installed the Pipishell Full Motion TV Monitor Wall Mount Bracket to hold my 32" Roku TV, and the experience was excellent. Installation was straightforward—everything needed (screws, spacers, and detailed instructions) was included in the box. The provided template made marking the wall and finding the studs a breeze, and the included Allen wrenches made assembly quick and easy.The mount offers smooth swivel, tilt, and extension, allowing me to adjust the TV for the best viewing angle from anywhere in the room. It feels sturdy and secure, and I have no worries about it supporting my TV, especially since it’s rated up to 44 lbs and my Roku TV is well within that range.Overall, this mount is a great value for the price. It’s easy to install, highly adjustable, and freed up valuable space in my child's room. I would highly recommend it for anyone looking to wall-mount a TV or monitor between 13 and 42 inches.

I wanted to mount a 32" TV above my computer for use watch shows and security cameras. This is on a corner desk. There are many mounting options and I was able to mount it so the TV is centered at the corner and looks nice. Mid-wall would have been even easier.

Mounted a 27" LG monitor, very easy to install, hardest part is finding the stud in the wall, other than that it's straight forward, you will need a 7/16 socket to tighten the screws into the studs if you are using the supplied bolts. You can use a wrench too, but it will take you quite awhile. Great product, great value!

This bracket was purchased to wall mount a 24” Roku TV. It was easy to install. The bracket allows the tv to be close to the wall while also angling slightly down for a comfortable viewing position. I would recommend this bracket.