Creality 3D Printer Build Surface Heat Bed Platform Sticker Sheet for Ender 3 Max CR-10,CR-10S,CR-10S PRO Smart 3D Printer 310X310MM (Pack of 3)

These are what you would call "buildtak" sheets. adhesion is VERY good. Personally i only will print PLA and PETG on any buildtak sheets, ABS sticks TOO well. these are great for the price. cheaper than bigger name buildtak type sheets

I have been looking for a reliable solution to print ABS. This is what I am settling on. Of all the things I have tried, most have failed or too messy: glue stick, hair spray, ABS juice on smooth or textured PEI or glass. The only thing I have found that work reliably well are Buildtak and these Creality. At 1/3 the cost of Buildtak, this is an unbelievable value. Not only that, the texture and adhesion is slightly better than Buildtak, while being significantly more durable than Buildtak. Considering these types of surface is consumable and needs to be renewed and replaced every so often, I find it hard to justify the cost of Buildtak. Highly recommended if you need reliable a surface for printing ABS.There are a few things you need to pay attention to while using these types of surface. Most importantly, do not let a hot nozzle touch the surface or the surface will melt and you make a tiny crater. Secondly, do not dig into the surface too much. These are the same warnings Buildtak include on their packaging that Creality does not mention but the two surfaces function almost identically so these warnings apply equally.

I'm printing with ABS and was having trouble with the print sticking. I got this mat instead of using hairspray as adhesive. I'd say it sticks worse than the hair spray cause it destroys the mat and part of a print. I'll try lowering the bed temp. Hopefully that solves it.

using it on the sunlu S8 currently. I'm brand new to 3d printing (3 days experience). Used this and got my base layer to adhere perfectly for first time ever as soon as i put this mat on. previously was using stock glass bed

I was skeptical of this stuff at first but it seems to have a really nice texture that allows PLA to stick really nice with a bit of purple glue stick added. And the parts remove easily with a little help from a scraper.

If you absolutely can't get your prints to stick to your build plate, here's your solution. For me it worked too good and I had to destroy my prints to remove them. This was with plain vanilla PLA with a plate temp of 45C. I have 2 Creality CR-10s and both of them did this. I tried setting the bed level lower than I normally would and it still stuck like glue. I gave up after messing with it for a whole day.

Must have for ABS! I used to have first layer adhesion problems they would always lift off the build plate not anymore! It works too well for ABS not I'm having issues trying to take the printed piece off the sheet! I've been running 260 hot end /85 on the bed

These were far too thin and flimsy for my liking and wouldn't stay put when I was trying to print using them.

Las laminas son buenas, se rayan si la palita que usas esta filosa