Spigen Tough Armor TECH with Custom-Fit Tempered Glass Designed for iPad 9.7 Case iPad 5th/6th Generation Case (2017/2018) - Blue

Super bueno y duradero

Time will tell but if it’s anything like my Spigen iPhone cases this iPad case seems really nice. Install was super easy. The hardest part was cleaning the screen off so no dust stuck but it’s minor compared to overall install. The case is the perfect size, easy to hold, and not too thick (that’s what she said). The buttons for the sound and screen lock seemed a bit odd as you push where the + and - are and since they are on the back part of the bezel it was a slight retraining from my last otter box case. The only questionable part of the case is the little strut on the back to prop your iPad up on a desk or counter. Seems a bit flimsy but I don’t use my iPad that much anyway. Just know that part may fail first. The glass screen protector being included is a nice perk and since it sticks to the actual screen and doesn’t have a dead space under it, junk and dust won’t get caught under it unlike my otterbox case. I’ll update if it has any issues but so far color me impressed with the value.

So far this case has been working out very well on my iPad. The feel and weight of it are nice. The kick stand is slightly better located than several other cases I have looked at, which allows the tablet to have less tilt than most. I find this make watching movies a bit nicer.The glass screen protector feels nice for use and was easy enough to install. The tightness of the fit did cause me post installation bubbling issues, but I was able to easily rectify that. I used a utility knife (razor) to scrape back the plastic edge so that the case would fit around the glass. Have to use a reverse scrape method to avoid cutting too much of the plastic off, and I figured this would work better than sand paper as the sand paper might slip and affect the finish.As mentioned previously, follow the instructions and place the front plastic part on the iPad before attempting to affix the screen protector. If edge bubbles appear after that, it's probably due to the plastic frame placing pressure on the glass protector.

The case is well designed, it is a polycarbonate sandwich with a TPU in the center with a glass screen protector.The stand is limited to two angles but it's not bad and gets the job done. Access to the ports and buttons are functional, however, my case, the volume up button is mushier than the volume down button. Being able to grip the iPad a lot easier with the case, however, I would recommend that Spigen incorporate some rubber around the TPU to give it more grip. Besides the two minor issues, the case exceeded my expectations from build quality and functionality.

After my son broke my last case I bought this.It’s sturdy, light weight and not clunky. It’s easy for me to drop in my purse when I’m out and about and it’s not heavy which is a huge plus.The only thing I don’t like about it is it only stands up horizontally. When I try to put It vertically it falls over which is annoying.

This case seems to be good quality. I wouldn't expect any case to protect an iPad screen from much of a drop, but it will certainly protect against scratches.I found that the screen protector was just slightly larger than the opening in the case at the top corners which caused the case cover to pull up on the screen protector corners. I fixed this by lightly sanding the top inside corners of the case cover with 400 grit sandpaper. I probably removed less than half a millimeter of material and the case now fits perfectly.I also took sandpaper to the sharp edges around the cutouts for connections and along the outside of the case. It is now much more comfortable to hold.

Bought this case for my daughters new iPad 6th generation . And I have to say this case is great !! Yes the glass protector could fit better because it doesn’t fit with the case perfectly , it does cause it to not sit right on one side but still works as intended so I don’t mind . I say this case is great because I tend to leave things on top of my car , and yes I’m a rush the iPad was on top of the roof of my car as I drove off . And I did not notice until I got a random strangers call about finding my iPad about 1/4 mile down the street at the corner . When I got it back it was perfectly still intact and nothing wrong . So I have to say it works perfectly . Thank you

For as long as I've had Apple products, (or Samsung phones) I've used Spigen products to protect them. This case is no different. My boys both have iPad 6th generation, and they love these cases. They especially love the kickstand, which to date (going on a year now) have not broken. My older son has a the Logitech Crayon - I used two Ringke pen loops and it's been attached without issue for eight months.The only problem with this case is that you cannot buy the screen protectors separately. Spigen customer service resolved getting new screen protectors effortlessly. They were so fantastic, I figured they deserved a stellar review in kind.

acquistato qualche anno fa. lavoro a bordo delle navi, tutto l’ambiente è metallico. Penso di aver salvato il mio IPAD una decina di volte.. e con esso i dati salienti.. folle non averlo avuto

Cover and stand is of good quality and easy to install

Perfect fit and solid build quality

Can't say enough good things about this case. Bought it for my wife's new iPad (2018). It fits tight and secure without adding very much bulk. In fact, the iPad with this case on it still fits easily into the Herschel iPad sleeve that we had previously purchased. We wanted this case to protect the iPad from accidental drops and scratches. It seems like it will provide much better protection than a regular bumper case or a folio case as the iPad is completely enclosed in this case. Of special note is a feature that pleasantly surprised us. In researching the case, it appears that it might be smooth and possibly slippery, but it actually has a rubberized texture/feel to it. The glass screen protector that comes with the case is great and maintains the look and feel of the iPad's bare screen. With careful and proper installation the glass screen protector is entirely invisible with no bubbles or dust. It fits prfectly inside the bezel frame of the case. This also means that you cannot use this case with a regular full size glass screen protector that would cover the entire glass front of the iPad. The bezel frame of the case has cut outs for the home button and the front camera so it doesn't get in the way of anything. The only drawback, and I don't see this as a bad thing, is that this case is a little more difficult to install than some other cases might be because everything fits together on the iPad quite tightly. If you follow the instructions properly and carefully though (perhaps watch an installation video) the iPad should be securely protected from drops and scratches. All in all this is a great case. The only thing that might make it better is if it was waterproof, but that isn't a feature we required.

Camera is covered …. not so good