Car Door Lights Logo for Cadillac Puddle Lights Lighting Entry Ghost Shadow Projector Emblem Welcome Lamp for ATS SRX XTS Cadillac Accessories Replacement 4 Pack

There are so many questions, “Will it fit my…?” that I thought I would help clarify. The listing says exactly what cars these fit.Compatibility:Cadillac SRX 2010-2017Cadillac XTS 2009-2018Cadillac ATS 2013-2017That’s pretty clear. If your car isn’t listed then these lights don’t fit it, but it’s very easy to find some that do.I just purchased these for my new (to me) Cadillac ATS. The thing is in pristine shape and has a gazillion bells and whistles, but an ordinary light beneath each door. Boring. Installation was a breeze. The drivers door took about two minutes. I took my time to ensure I didn’t break anything and the original light just popped out with a little prying. The passenger door took half the time. They are both bright and clear as can be. I’ve got a four door sedan, but I won’t use the back seat so I didn’t install them in those doors which leaves me with a couple of spares. I also kept the originals in case I should every decide to or need to reinstall them.My logos look just like the pictures except that they are sharper and better defined. They look really nice. I’ll even say classy. You have to wonder why GM and other auto makers don’t do this at the factory. I shouldn’t give them ideas. They would probably charge $250 for a couple of logo lights. You gotta watch that kind of stuff. I bought a little box off of Amazon for $7 that makes my third brake light strobe then flash then stay on solid. There is a Cadillac dealer in Florida that literally sells the exact same box for $20 – after cutting most of the label off. That lack of ethics just screams not to take my car there for maintenance.Back on track. You would think these lights would be marked for the left and right sides of the car, but they’re not. If yours are backwards, you have them in the wrong doors. Swap them. (I just happened to get it right the first try.) If only one is backwards, then push that little tab on the lens housing around half a turn. The whole black lens housing will turn. You’ll need a little screw driver or a toothpick to push the tab around to the other side. Do that and your logo is flipped 180 degrees.People say they tend to fade after a while. My original lights have incandescent bulbs so I cracked one of these open (they just pop apart) to ensure that wasn’t the case here as that heat would fry that little logo pic pretty quick. Turned out to be a little LED that generates practically no heat. The seller basically says that to preserve the logo, don’t leave the doors open. Well, I’m not going to change my habits just to keep that logo from fading. 1. They aren’t very expensive. 2. I only used two of my four pack so I have spares. 3. I don’t drive much. Easily less than 2,000 miles per year. The doors aren’t opened much anyway.They look cool and they’re inexpensive. If mine fade I’ll install my spares. If those fade I’ll just buy another set.

So far so good, easy install!! I’m bummed for whatever reason my 2914 ATS Luxury doesn’t have back door lights so I guess I’ll have to just deal lol. I’ve read review about the lights dimming out so I guess I’ll have extra for when that happened. You get what you pay for! I’m excited!

This light gives you the Wow factor. Shows up bright and large at dusk and though out the night. Awesome product for the price. I watched UTube videos on installation but I had the Dealership Tech installed for free. It took him 10 minutes to install all four doors.An update: After a year has passed my door light logo got distorted for all four doors. You can’t make out the Cadillac logo. Apparently this light works temporarily and not long term. Buyers beware.

Was super excited to get these lights. They were extremely easy to install after the first one was figured out. They were bright and crystal clear when first installed. Cut to a few months later and they are dim and no longer sharp in color. Disappointed that they didn't last. Went from Cadillac quality to Geo Metro quality too quick.

I went at it the wrong way So I broke one The rear doors are difficult but not because of the lights Cadillac cut the wires so short If you don't want to be stupid like I was wait for the lights to turn themselves off I got right after them and those little lights blistered my hands in 6 different places but after all of my ignorance the lights look perfect They are really fairly simple to install You have a adjuster so you can have the emblem lined up where you want it I think you will be very pleased with the results I would recommend them

When we tested out the lights pointed at the ground the lights were very bright, clear to read, only problem is these were not easy to clip in and move on as suggested. I do recommend this product for something fun to add to your Caddy, but they do not just clip in to all lights. Our DTS would need us to do some hard wiring, and removing the door panel. We were not able to use them sadly, but if they work for your car I would 100% buy these!

I absolutely love this product make my car feel more bougie than it needs to be, so here’s a picture of me taking it at night little white rectangle thing is my foot so it comes out very well they’re LED lights and it was kind of confusing at first to get the lights in once we figured out that there’s a designated left and right then it was super easy!!!

Pretty easy to install, however the lights are not marked "left & right" sides of the car. So, be careful. Just pop out the existing puddle lights out and replace with these "Cadillac" lights.