3DLAC 3D Printing 3D Printer Adhesive for Adhesion to Heated Print Bed, Spray, 400 ml 13.52 fl oz

Absolutely love this product. My brother runs a 3d print shop and recommended this to me when I got mine. I was so sick of scrubbing glue off of plates that this product feels like a lifesaver. It works extraordinarily well, keeping pieces secure on the plate with no warping. Very easy release, and it leaves the bottoms of the piece looking perfectly clean. I've been spraying it about every three prints. but I'm sure it could go longer without issues. I've only used it with PLA so far. I believe that it is worth the price, although I haven't determined how long it lasts yet. I also think it smells really good. My only nitpick is that the nozzle could use a little more control.

literally the best adhesion spray ever. easy to clean off, no smell. prints come out immaculate every single time!

This stuff is great, better than nano polymer adhesive and cheaper too, though I would recommend waiting for this to go on sale if you can. Unlike what some have claimed this isn't just relabeled hairspray, It has better adhesion than hairspray, and unlike hairspray it doesn't degrade even at 120C bed temps. This is the first adhesive that I've tried that works well on bare steel, so no more destroying buildtak/pei/glass beds with prints that stick too well to the build surface. It does need some help with larger ABS and PC prints, I use ABS slurry in addition to this adhesive which entirely prevents warping at the cost of ease of removal. If you're just printing PLA parts, they hold well, come right off when the bed cools and the adhesive lasts for quite a few prints before needing to be reapplied. I haven't used it much PETG, frankly I find it more annoying to print than ABS, but the two prints I have done with PETG have stuck well and released easily when the bed cooled.

This stuff is actually amazing. I thought I was just terrible at 3d printing. It was so hard to get things to finish. I would tweak the setting on everything. Bed temp hi, low different filaments but never tried another glue since I thought they were all the same, whoops. Since this stuff was delivered I have printed endlessly and haven't had a single break from the plate. I love the spray instead of the roll on. The spray amount is perfect and covers the plate with one swoop. It just works. My 3d printer has come alive again and my son is really stoked.

Absolutely love this product. I was using glue sticks for better bed adhesion but had to wash my plates after a few prints to avoid too much build up and would leave the prints sticky. This creates great adhesion without a sticky residue. When you let the prints cool a bit before removing they come off super easily. If they cool completely they practically slide off. Also love the fact I can spray a light coat on the build plate, let it dry for a minute or two and start a print up.

Definitely has a smell to it but it works great, and none of the artifacts in the prints you can sometimes get from thicker glues. A little bit goes along way on smooth PEI plates.

Much better than glue sticks. Also tames an unruly beard.

If you look the the label it is manufactured by a beauty supplies factory in spain, I looked it up and guess what they make a hairspray that's exactly that same bottle shape and size. So this is most likely just regular hairspray mayyyybe with some additive to make it more suitable for 3d printing use. Some folks swear by this and claim that it hold better than hairspray at high temps but who really knows. +4 stars because it works and remains effective even after you touch it, 1 application lasted me 4 prints and still going. Regular hairspray works the same but doesn't say "3D" o the bottle so there's that, the marketing really does do tricks -1 Star because of the price and the fact that it was made in the same factory as a $5 hairspray with the exact same container design. If you're going to sell rebranded stuff at least dont charge me 3 times the price for it.

Smells just like hair spray but I'm sure it's not. Best adhesion and least residue of any glue I've tried. Sometimes it sticks a little too well, but rather that than a failed print and usually allowing the plate to cool after print will result in an easy release. Is particularly good with higher temp prints like ASA and PC.

Ich hab den 3DLAC Sprühkleber (400 ml) über mehrere Druckjobs hinweg im Einsatz gehabt, und wenn es um eines der stillen, aber entscheidenden Helferlein im 3D-Druck geht, dann fällt dieses Produkt ganz klar in die Kategorie „macht, was es soll und zwar zuverlässig“. Was ich sofort mag: Die Handhabung ist einfach und vorhersehbar. Leichtes Aufsprühen, kurz trocknen lassen, und das Filament haftet sehr gut – gerade bei PLA oder PETG spürt man den Unterschied, wenn die erste Schicht sauber und plan am Bett sitzt. Kein lästiges Nachjustieren der Druckbetttemperatur, kein „Ränder heben sich, Mitte bleibt kleben“-Drama mehr. Gerade bei großen oder flachen Drucken ist das ein echter Komfortgewinn. Der Sprühnebel verteilt sich fein, ohne gleich eine nasse Pfütze zu hinterlassen. Das sorgt für gleichmäßige Auflagefläche, ohne dass man hinterher Stunden mit Reinigen oder Abkratzen verbringt. Und falls doch mal zuviel drauf ist: Mit etwas Wasser oder einem feuchten Tuch lässt sich das nach dem Druck recht einfach entfernen. Die 400 ml-Dose reicht erstaunlich lang – ich drucke regelmäßig und habe bei weitem noch nicht die Hälfte verbraucht. Das ist angenehm, weil man sofort merkt: So ein Helfer wird nicht zur Einwegware, sondern bleibt länger im Werkzeugkasten. Fazit: Ein solider Sprühkleber für bessere Haftung auf dem Druckbett, der zuverlässig und ohne großes Gefrickel funktioniert. Besonders bei anspruchsvolleren Drucken oder wenn du öfter mit Materialen arbeitest, die nicht von allein anbetten wollen, kann 3DLAC wirklich den Unterschied machen zwischen „läuft sauber“ und „Stop-Spiel“. Im 3D-Druck zählt die erste Schicht oft mehr als alles andere – und dieser Sprühkleber sorgt, dass sie nicht zur nervigen Hürde wird.

3DLac, que decir de esta laca para evitar warping en la impresión 3d, y tener primeras capas bien hechas. Yo que tengo bandeja PEI Texturizada ya que dice en una esquina que use pegamento. Y con uno en spray, gastas poco, dura mucho, y tiene muy buenos resultados. Y si te lo venden en packs baraatos, BBB

Tutto ok

Para cualquier usuario de impresión 3D, el mayor temor es que la pieza se despegue de la cama a mitad de trabajo, y este spray es probablemente la solución más eficaz del mercado. A diferencia de las lacas convencionales para el pelo, el 3DLAC está formulado específicamente para laboratorios y entornos de fabricación, ofreciendo una adherencia química que se activa con el calor. Su aplicación en atomizador permite una distribución mucho más uniforme y fina sobre el cristal o la superficie PEI, evitando que queden grumos que luego se marcan en la base de la pieza.