Mounting Dream TV Wall Mount for 32-65 Inch Television,Mount with Swivel and Tilt, Full Motion Bracket with Articulating Dual Arms, Fits 16inch Studs, Max VESA 400X400 mm, 99lbs, MD2380

Works really well. Had a 40 inch TV on it and upgraded to a 65 inch tv. Was a little nervous about its ability to hold it since I was pretty much red-lining the rating for it. After about four months with the 65in TV, the mount is holding up surprisingly well. For the price, it's pretty strong, easily adjustable, and easy to mount.

Update 4/30/21. Original purchase 2/19/19. I needed new parts to accommodate a new TV using the same mount. But I didn't keep the extra parts that came with the mount, so, I called Dream Mount for help. They are sending me what I need (screws and spacers) free of charge. Now THAT'S service. From opening the package to finished install, this piece of equipment was truly a "Dream" to work with. Very high-quality piece of gear. Very easy to install and it feels solid as a rock after installation. I had to build a frame structure in an opening for a recessed TV. That was the hard part. Once the studs were in place, the rest was very easy after I figured out how high to drill the holes in the studs to get the new 55" Samsung mounted at the right height on the studs. The mount comes with a tiny level for the template and a 6-inch level for checking your work as you go. It also comes with many TV mounting components of different sizes so you can mount any TV. Well packaged and marked. The user manual was also well done and easy to follow. I put the back brackets on the TV using one long spacer for each top hole and one medium spacer for each bottom hole to account for the curve of the rear of the TV. I used the longer, thicker bolts. I then drilled 4 holes with a 7/32" drill bit, two in each stud where indicated by the template. I could not use the little level for the template because with open studs, the template didn't lay completely flat. But I used a 2.5' level of my own to check the levelness of the template on the studs and knew how high to drill the holes by measuring from the bottom of the TV to the bottom mounting bar for the mount. It was a little difficult to put the first bolt into the studs because I had to hold the 22+ lb. mount in one hand while getting the bolt started with the other hand. I'm 72 and not as strong as I used to be. But once I got one bolt in, the rest was easy, using a ratchet to drive the bolts. I had to get help lifting the TV onto the mount. It was just too big and bulky to do myself. But once hung on the mount bars, it was simple to put the hold clamps on the bottom of each side and then adjust the TV for leveling, which in my case, I just used the TV frame and pushed it until it was level. It stayed there and is very solid. I also pulled the TV out to the maximum extension of the mount and turned it so I could see the TV from another room, the kitchen. Very cool to be able to do that, so I can watch TV now while I cook. When I was done checking that, I just pushed the TV back into place, very easily, for watching in the family room. I love this mount. It is very well made and solid. I will be needing another one for our master bedroom soon and I will absolutely buy another one of the exact same model for that job, which will be a flush mount on our bedroom wall near one corner high on the wall. More complicated job because I'll have to install an electrical and cable outlet up behind the TV so no wires are hanging out. But I know this mount will be perfect for the job.

This mount is excellent. It perfectly fits a standard 16 inch stud spacing, but no more than that. The outer most holes for the stud mount go out to only 16 1/4 inch, and have slotted holes for the smaller stud spacing. More specifically, I bought and mounted this for an LG G5 Series 55” OLED. Not only does it fit for this specific TV, but it also has room for adjusting it up and down, sliding left and right, and allows the TV to come out and inwards using the extendable hinges. I do like the little bubble level it comes with, it’s nice to keep and save in my office desk, for little nuance projects. Only thing I wish it came with, were 4 washers for the lag/stud bolts. The surface area that the bottom of the head of the bolt, doesn’t seem to have much contact area for my liking. So I added 4, 1 inch wide washers to give the bolt more area to clamp the mount and spread the load across the slotted hole. Other than that, with a little measuring and thought, this mount was extremely easy to install. Do take the time to see how far up or down you want mount the long black mounts that actually attach to the TV. Other than that, it’s still holding up great. Before I mounted my TV, I grabbed a bathroom scale, and while i stood on it, I pulled more of my weight onto the mount, and I wanted to confirm it would hold 100 or so pounds. It did so very well, felt and sounded sturdy at about 140 pounds. This manufacture does state 100 pound limit if I can remember correctly. So just keep that in mind.

This was quite slick to install. Only thing to be aware of, it’s about 16” wide, so if your studs are not centered right around the spot you want your TV mounted, you may want to either hit 1 stud and drywall anchor the other side (not what they recommend but probably ok if your TV isn’t very heavy) or do what I did and run a couple 1x4s across a few studs to give you a solid base to mount this into. But mounting it and hanging the TV really was very easy. I am really happy with it - it’s rock solid, has a really wide range of motion, pulls out from the wall quite a long ways, and can turn quite far, too, which makes it easy to reach all the sockets and ports in back.

This mount has increidble reach and is very solid. As a comparison my other primary TV mounts are the Mount-it Beast (also very long arms but dual). I needed this for a very unique mounting scenario. See images attached, but I was able to cut the main wall bracket to fit between windows, while still hitting two studs. Why four stars? Very small maount of slop or sag due to the lenght of the arms, and it being a single arm mount. It's not a big deal and I persnoally have really high expectations for this type of movement, however it does cause you to need to relevel the TV with any major movement of the arms. I don't think this a is a flaw necessarily of this specific mount, and rather just a symptom of the mount being an extremely long single armed mount. The pivot feature and mounting hardware all works great.

This wall mount is very good and This is the 3rd time we have bought this mount and used it. Had a friend helping me on this one and he is an it person and all he could say was how well it was built and how much flexibility we have with the TV. Well worth the money and easy to install.

At this price point, my expectations were fairly low for the Mounting Dream MD2380 articulating TV wall mount bracket. Much to my surprise, this wall bracket is a robust, well engineered, quality piece that is on par with similar TV wall mounting brackets costing 3 or 4 times as much. The instructions are simple and clear, and the whole installation process is very straight forward. MD even includes a bonus bubble level, a braided 6' HDMI cord, and enough machine screws and spacers to fit the TV mounting brackets to practically any TV on the market. It took me a little over 20 minutes from opening the package to having my 55" 4K TV securely mounted to the wall. The unit is designed to allow you to adjust your TV to sit flat against the wall (with an approx. 3" space) or pull it over two feet from the wall for angling. When extended, the TV can be angled left or right up to 35 degrees and you can also adjust the vertical picture angle from +5 degrees to -15 degrees. An added bonus is the articulation makes it MUCH easier to add components to your TV at a later time. Flat wall mounts require you to remove the entire TV to access the back panels. The unit feels very sturdy and can be moved with a nominal amount of effort. The packaging says this wall mount is rated to hold up to 100 lbs., but when mounted properly, my guess is it could handle at least twice that weight with ease. I highly recommend this product and I am writing this review because I came back here to order two more for our other flat panel TVs. If you are going to buy this wall mount, and trust me, you won't regret it, read on for a brief primer on how to install it. Installation experience: Before opening the box, you will need a cordless drill/driver, a 3/8" drill bit, a measuring tape, pencil, a ratchet with a 12mm socket, a #4 phillip's head screw bit and a stud finder. The instructions say you can mount this bracket to sheet rock studs or cinder block, but not to straight sheet rock. Makes sense as even with sheet rock anchors, the bracket will eventually pull from the wall if the articulation function is used as intended. The first step is to locate what wall you want to mount the TV to and then use your stud finder to locate the studs that you will be anchoring the bracket to. I found that the easiest way to get a nice level mounting was to use the mounting template with the included bubble level. Once level, simply tape the template in place and then drill the four mounting stud holes right through the template. After removing the template, place the wall bracket against the wall, line up with one of the upper holes you just drilled and use your ratchet and socket to drive the first bolt in until it is almost tight. Leave some play so that you can align the other three bolts and do the same with each. When all four bolts are in place, go back and finish tightening them securely. Attaching the TV brackets is really easy with the plethora of machine screws and spacers included with the kit. Once the TV brackets are attached to the back of the TV, find an assistant (depending upon the weight of the TV - this will be a two person job) and place the TV on the wall bracket. You will here it click in place. There are two included screws at the bottom of the TV brackets which are used to lock the TV to the wall bracket. Make sure these are tightened so you can safely use the articulating feature. Plug in your cables, fire up the TV and Voila! You can now sit back and enjoy your TV from practically anywhere in the room with a perfect picture angle.

This Mounting Dream TV wall mount is exactly what I needed for my living room setup. Installation was straightforward — the instructions are clear and all the necessary hardware is included, so I had it up in under 30 minutes. The full motion articulating arm is smooth and sturdy, allowing me to swivel the TV left and right and tilt it up or down to get the perfect viewing angle from anywhere in the room. The build quality is impressive for the price — it feels heavy-duty and I have no concerns about it holding my 55-inch TV securely. The dual arms provide excellent stability and the post-installation leveling adjustment is a nice touch that made it easy to get the TV perfectly straight. I've had it up for several months now and it hasn't budged at all. Highly recommend for anyone looking for a reliable full-motion mount.

good finish easy to install and sturdy

I am really pleased with this mounting kit and highly recommend it to anyone needing one for a 26-55" TV wall Mount. There are a few different kits available depending on the Wall Stud Distance and one or two arm mounts. I choose the two arm mount 16" Spacing kit. Like always shipping was free and really fast to my small remote town via Canada Post. Very pleased how fast it came. It was nicely packaged and when opening it, I found everything nicely labeled and packaged nicely. The instructions with the kit were really well done I feel, and easy to follow. Some of the Bonus Features I found were: 1) Included a really nice HDMI Cable 2) Includes Not Only a Wall Template but a small Bubble Level to connect to the wall template, but also a larger level for other leveling needs. 3)Contains handy velcro straps for cable mounting. Mounting the wall mount was pretty simple, I found where the studs were on the wall and marked them with a pencil, I then found the right position for my mount using my markings and the included template. It includes a small level you mount to the template and this allows you to get it nice and straight. I then predrilled the mount holes and removed the template. I was painting the wall, so did found the locations and predrilled holes before doing drywall repairs/painting, just in case. When the time came to mount the wall mount, I used the included lag bolts and put them into the wall studs I pre drilled earlier. You use the included larger level to get your wall mount just right and then tighten in the bolts. The kit comes with a good selection of bolts, spacers and washers to mount the mounting pieces to your actual TV. I found I needed longer bolts, but the spacers etc worked perfect. Just lift the TV up now and attach it onto the wall mount. Once on, tighten the lock screws and its on there good. You can then make the adjustments like tilt and any fine tune straightening. I really like how well this kits is made, and all the included things to make installation as simple as it could possibly be. Being able to pull the TV Away from the Wall and move at angles if we are out on the back deck is really handy and moves smooth. I would highly recommend this kit to anyone needing one, it really made installing my first TV wall mount a breeze and I feel comfortable with my TV hanging on it.

Very sturdy. Easy to install

I used this for my living room TV. Mounted pretty easy. The instructions and all the included accessories make this a fast and clear process. I would recommend and buy again.

Excelente calidad y funcionalidad.