Monoprice Adjustable Tilting DUAL Desk Mount Bracket for LCD LED (Max 33Lbs, 10~23inch) - Black

Got this stand to free up some much needed desk space. Holds my 24" and 21" monitors w/o any problems. Looks nice and clean on my desk top. I took the advice of another reviewer and purchased a few very thin felt pads to put under the stand so it won't scratch my desktop.Only issue I had was it came with two sets of screws for the VESA mounts, but two different sizes. Both my monitors use the same size screws so I had to go to the hardware store to buy another set (and got the felt pads at the same time).Installing the monitors on this mount is almost a two person job. One to do the tightening of the screws and one to hold the monitor in place until the screws are tight.I only gave this a four star because of the requirement to buy another set of screws.

These are sturdy and strong monitor supports. The base support does protrude about 4 inches in front of the monitor onto the desk work space. I have two supports for four monitors located next to each other. The second support is at an angle to the first support, so the base support overlaps the other support. Overall I am happy with the product. If you are looking to fine tune monitor height and angle so everything looks like a one piece setup there is a bit of fiddling to do, and some patience needed.

I wanted to buy the single monitor bracket for behind my laptop, but a single monitor bracket 15" high means the laptop in front barely blocks the monitor centered at 15" on the pole. This bracket is for two monitors, but I have one 24" monitor centered 16" high. I can unfold and use a 16" screen laptop in front and see the 24" monitor (center is 16" high) and bezel on the stand and use the table and chair at normal heights. The base is heavy and the pole well attached with a heavy Phillips screw. The height of the pole bracket is adjustable and allows tightening. The monitor bracket allows 75mm and 100mm monitor mounting (3 different size sets of 8 screws). A spherically moveable bracket joins the pole bracket and monitor bracket. All the brackets can be assembled and secured with the supplied with screws. The spherically moveable middle bracket will rotate or tilt the monitor and it will stay in position if you find the three screws and tighten them evenly the right amount. The pole bracket adjusts up and down. Spherically moveable mount joins pole and monitor brackets. Monitor bracket attaches to monitor. When assembled the spherically mount should allow positioning the monitor with hand force yet the monitor remain in place . Two included Allen wrenches fit all screws except a large Phillips is needed for pole to base. You really want to know that it is smooth on the bottom with the screw in, but I will add pads. The flat black finish looks good. It is plenty sturdy and heavy enough to stay in place with 2 normal monitors. It sits on the top of the table and does not attach to the table with a bracket. Assembly time of 10-15 minutes is well worth the sturdiness and ability to adjust anything.

WOW, I didn't expect this dual stand to be this good. The stand is much heavier that I thought, much taller and very heavy duty. For under $50 you can't go wrong. I was shopping around and other sites/stores went over $200 for just a dual stand. When I buy my next (4th) monitor, I'm going to order this stand again, its so worth the money. I'm just shocked how thick the metal is, very nice clean black color and looks very nice on the stand its on. Its got to wt about 15#s or more, that's how strong this stand is. If you are looking for a stand to hold up to 2 - 23" monitors, this is the stand for you. Don't bother looking elsewhere because you'll be wasting your time and money if you buy it somewhere else. From base to top of pole it stand 30". Just remember, if you buy this, there are 3 small screws in back of the bracket that goes around the pole that holds the monitor up. In the instructions, it only has pics and it does not show anything about those 3 little screws. If it does, its not very well noted. I had to log online with Tech Support and once he told me about those 3 little screws my monitors are stand up str8 instead of looking down. Also remember to buy it if Amazon sells it and/or ships it ( free shipping and no tax ) because if someone else sells it, you are going to pay a lot of shipping charges, that's how heavy this thing is. WELL WORTH THE MONEY!

Wow, $37.50 retail for this fully adjustable stand. I don't understand how someone can manufacture this in China, package it, ship to USA, warehouse it, ship it to me and make some profit by selling it @ $37.50. Must be some very low wages in China.I have two older 1650 x 1050 22 inch monitors and these old clunkers are dead weight and this stand handles them no problem. I just purchased two new LG 22 inch LED monitors and they are a fraction of the weight so this stand should have no problem with 24 inch newer LED monitors or even bigger. I read some reviews that this unit might scratch your desk surface... this might happen as it did have a small amount of rought casting edges. But no problem, I put some half inch round felt pads on the bottom... now I can simply slide the stand on my desk t to move around. And I still give this 5 stars because it was only $37.50... when purchase the lowest cost item, you expect a few rough edges. But all the mounting hardware was 100% and fully adjustable as indicated. You do need to really tighen up the big screws that hold the base to the pole and the big screw on the ball joint for the monitor mount....you'll need a big screw dirver andIf your not very handy, you might struggle putting this together but that's you, not the product.

I nearly didn't order this because it seemed too good to be true. For less than a quarter the price of some competing product, I got a very solid product. Not that easy to set up but that's because you're trying to delicately make adjustments whilst holding two large monitors, any stand will have the same issue. Since I've attached the monitors,I've not had to adjust/tighten anything and I'd say if you haven't considered having two monitors vertically stacked, you should try it. Takes up much less than than two horizontal monitors.A great stand for an incredible price.

The Stand is larger than i thought it was and had to remove an inch form the top. Saying that, The stand is very solid and well built. I have it supporting a 27 inch monitor and a 24 inch monitor. It is best to get a friend to help fit it together as once you have attached the clamps to the back of the monitor your friend can support it whilst you tighten the clamp to the stand. Overall a very well built stand and at a brilliant price

well for the price i didnt expect much..but read some reviews and though wot the hell go for it...omg i well pleased...this stand could hold up a train..LOL..so to spreak...very strong/solid..holds both my 24" screens with ease...defo buy another..any 1 looking for a stand with this config look no further..buy 1- 2 or even 3 of these..

Very sturdy stand, looks slightly out of place on desk. However very good value for money and much more thanI was expecting. Only criticism is that I found it hard to adjust once the monitors have been mounted due to the usage of allen keys.

I am only using this for one monitor but I needed to lift it quite high. It was easy to assemble, has a high quality finish and holds my 22" monitor well. There has been no slippage since the monitor was attached.