CNC Aluminum Φ 48mm Clip ons Handlebar replacement Fit for Universal Fork diameter 48mm cafe Racer handlebars Tilt Angle 8° bars Φ 7/8", 48mm Clip on Assembly Black

I simply bought these for the bars. (The replacement bars were $20 a piece and I could get two 1" bars for $35 with this kit.) If you need the 1" bars for a tube clamp that accepts 7/8" bars, these are perfect. The bar is 1" but reduced to 7/8" at the clamp point. (I have a 2002 Honda Shadow 1100. That bike has 41mm tubes and needs 41mm clamps. Simply buy both sets, the 41mm clamps with 7/8" bars and the 39mm clamps with 1" bars. It's cheaper than finding 41mm clamps with 1" bars. If I get lucky I can sell these 7/8" bars and 39mm clamps to someone else.)

Very good quality clip-ons and that would still be the case if they were > $100. Hollowed for bar end mirrors and the CNC'd aluminum was actually stronger than the stock handlebars on my Iron 883. Had no issues with installation and the stock controls fit perfectly, no need to drill holes to run the wires inside the bars in my case.

These look really good and are easy to install. IF.. you are putting them on your shocks above your yolk. Otherwise you will have to take the yolk off as it is a one piece. Because they are one piece they don't tighten as well as a 2 piece. On my shocks I would tighten they were solid, but I guess the aluminum would stretch and after just a day they would need to be retightened. Did that twice. The 3rd time the aluminum split vertically.

Look great fit nicely seem well built and solid.The only issue I had is that they are precisely 1” in diameter so my components and grip were a little loose moving from my old bars to these. Apparently my old bars coating made them a little thicker than 1”.

Works well and look good.

Fit exactly and was easy to install on my fzr

I like the bars a lot. Unfortunately, I didn't do enough research before I purchased them. I won't be able to use them. I bought them for a 99 Honda Shadow vlx Deluxe. I seen a lot of pictures and they look really cool. But it's just changed the rideability so much.

I needed 1" bars, but couldn't find ones with 41mm clamps. Bought these and a set of 41mm with 7/8" bars to get what I needed.

Ajusta perfectamente sobre la suspensión de 39mm de la sportster, las barras son de 1" y los controles se ajustan perfectamente en ellas. Le di la calificación de 4 estrellas porque se necesitan pequeñas modificaciones para ocultar los cables de los mandos, pero en general es un buen manillar.