Manelord Dent Puller - Dent Remover with T bar Dent Puller and Upgraded Dent Puller Tabs for Car Dent Repair and Metal Surface Dent Removal

I love this thing. While it's not the highest quality product, it's still pretty darn good. I've this hot glue gun for Home improvement projects, arts and crafts, anyone to build some Cardboard furniture for my 2 year old son. This thing has been quick heating, easy to use comma and consistently reliable. This is the kind of tool I think should be in everybody's home. Even if you don't do arts and crafts like I do, I'm certain that you will find some use for this. In a few months I've had it, have probably used it at least a dozen times, including to adhere motion detecting lights to my garage, which is proved exceptionally difficult until I use the hot glue gun, which is the only thing that has made its day. I highly recommend this product and encourage anyone to buy one who is even remotely thinking about it.

Most hot-glue guns you find are 60 watts. I replaced one of those with this 100 watt gun because I was not able to get enough glue at one time. When assembling some projects, one might need to be able to get a 3 to 5 foot bead out all at once so you can adhere it all before the first of it sets. I could not get that from my old gun but this one fills the bill. Mostly, it's pretty much like any other, with the exception it can deliver more glue at a time. Another nice feature not found on most others, is a power switch in the handle. For just about the price of an everyday hot-glue gun, this one gives better capacity.

Special glue is no stronger than regular hot glue. Kit is fine, but doesn’t work due to poor glue strength. Really bummed I missed my return window, just putting it all in the trash now.

Surprisingly it does work about 5 out of 10 times. Once I realized I was pulling to hard it started working for me. Also have to wait at least 5 minutes for the glue to dry before pulling on it. Overall I'm happy with the results and for the price u can't beat it!

glue sticks did not stick we for me except tge clear ones. It did not pull my dents either, so I'll give it a go again and see review in progress

This thing works great! My son had put a huge dent in the trunk of my minivan when he ran into it riding his bike. This dent puller pulled it out like nothing. We purchased 3 other dent pullers before this one and none of them worked they would just pop off the surface of my van. If you have a big, medium, or small dent that needs to be pulled out then you MUST buy this. My husband also pulled a small dent on a curved part of my sister in laws fender that she struggled getting out since it was on a curve so no other dent pullers could get a grip on it. He also used it to pull out a small dent on the side of his truck! I’m telling you it works great! So what are you waiting for? Just buy it and go pull that dent out already lol :)

Although looks very small on images, it is a big glue gun. Pros: + Industrial or at least professional grade, very solid quality. + Heats fast and easy to work with. + Very inexpensive for quality! + Light gives you a clue if it's on or off. Cons: - I would like to have a longer cord, but extension cord solved this issue :) I used it to have plastic bumper fixed, worked very nice and I saved a bunch of money! I am completely satisfied with this purchase and would recommend this to friends and family. Thanks for reading!

This is ok for light use, but really not what I needed for some larger sized dents. I ended up buying a stud welder/puller which was MUCH heavier duty and worked well for me. But, I was hoping to use this tool and avoid having to strip down to the metal and also having to paint. Here are some key points about this kit: - The package actually contains a small glue gun and several sticks of glue (both black and clear). This was NOT in the item description, so I purchased the 100W glue gun bundle and sticks for an extra $10 or so. The 100W gun is much better than the one included in the kit. - There are 2 kinds of glue sticks. One is clear colored and one is black. The black glue was of no use for me. It's too tacky and just didn't stick well. It was also more difficult to remove. The clear glue was much stronger and easier to use. However, it would constantly come loose before the dents were pulled out. Once the glue was applied, I tried leaving it sit for 5 minutes, 10 minutes, 20 minutes, 30 minutes...it didn't seem to make a difference. I tried so many times to make this work, but it just made me frustrated in the end. -The T-Bar puller weight is sufficient, although somewhat light weight. But the problem is that the glue kept giving up before I could really put any force on it. The red pro glue tabs are easier to use and gripped well to the puller, but they are not for smaller dents. The puller attachment for small dents slips out very easy. I ended up hitting my hand on the wall several times because it would slip out. When it didn't slip out, the glue would come undone. Having to clean up the glue so many times off the car and the tool just got old. Just to be clear, I did have some success on a couple very minor dents. I even got the larger red tab puller to stick a few times where it moved the metal some. But as an overall kit, it was a disappointment for me.

I bought this kit on the recommendation of a YouTube video I watched on repairing the book release catch on my car. I was in two minds whether to get it or not, but I'm so glad I did. It was a pleasure to use and made the whole job very simple, so it saved me a lot of time and stress. Using the right tool for the right job in trim removal is key and I can't recommend this set highly enough, I wish I had bought it years ago. Even if I never used it again, it was worth it for just that one job as I got all of the fittings out without damaging them and could re-use all of the components. Brilliant!

J'ai acheté sa malgre lire les mauvaises commentaires quil avait. Je me suis dit je vais donner une opprtunite et sa ma surpris. Ce vrai que quand on na pas dexperience avec qqch et si on ne lis pas les instructions comme il faut ça ne vas pas marcher et la colle sa va decoller et va être impossible d'enlever le bosse dans ma voiture. Hirr il faisait 5 degres ou j'habite et quand jai mis la colle sur la patente en plastique noir sa séché super vite. Du a sa jai du approcher ma voiture a la pris courant pour avoir le temps de le coller comme il faut. Apres ça jai laissé secher 4 minutes avant d'utiliser la barre pour enlever l'imperfection que ma voiture avait. Et sa marché, cetait tre facile de enlever la bosse et après pour le decoller cetait super facile aussi.

Ok

Exactly what I wanted. Yet to use it.

Absolutely useless. The plastic adapters come off from the glue uppon the slightest pull. Doesn't hold enough to even pull a single dent. Dont waste your money on this kit, it's pure trash