APT,2 Mil Polyester Tape with Silicone Adhesive, PET Tape, high Temperature Tape, 3.5 mil Thickness, Powder Coating, E-Coating (6, 2" x 72Yds)

Works great for resin molds. I wish it came in clear.

Bought this roll to cover front of shower pans and tubs on a hotel build while pouring Gypcrete. It sticks great and removes very easily with no residue.

This tape allows me to create my own custom resin molds as needed

I used this to mask off the openings in a transmission case. It was just sticky enough to hold and did a good job.

I used this to tape a drip pan in my freezer – a silicone pan, in fact, designed as a pet tray. The tape adhered instantly and well to the cold, damp plastic of the freezer. The silicone not so much, but it's not under any tension and seems to be working fine. For my purpose, the tape serves to guide any water *into* the pan and not under it. I've tried my best to trouble-shoot the drips and replaced the coil sensor and the fan, but I still get drips so this is my solution – the silicone tray allows me to pop the ice off instead of banging on the bottom of the fridge to fracture it (I don't want to damage the fridge).Now I have 71 more yards to find a use for... I'm sure I will somehow. Good stuff!

Adhesion is much better than other suppliers. Usually it will not stick to the parts I am masking, but with this kind it seems to be working and doing what it is intended to do. I would purchase again.

We use this for powdercoating, the adhesive level is perfect, not too much, not too little, and easy to work with.

This tape shrivels up when using at 400f. I’ve used it for masking for powder coating and it just peels up by the time my parts are ready to pull from the oven. Isn’t very sticky either, wondering if I got an old roll.

You can heat and reheat this stuff over and over and it still remains sticky. Super good for holding your heat transfers in place.

Super Qualität, Nutze es zum abdecken beim Pulverbeschichten bei 200 Grad

Put it on the catch can cylinder on my desoldering gun to help prevent clogging. Working well so far.

Amazing product, doesn’t leave marks or residue like many others I have tried. Great price too

Make sure you measure your rims properly. You don't want the tape the tape to go up the walls of rim, but it seems to work regardless. Wasn't able to get the tape to contour to the inner channel well without creasing but that might be because I used the wrong width. In spite of that it seems to be holding pressure well. Will update if it doesn't hold up. It sticks well but you can also peel back if needed.