FLEXISPOT Ergonomic Office Chair, High Back Mesh Swivel Computer Chair, Executive Office Desk Chairs, with Adjustable Lumbar Support/2D Headrest/Lockable Backrest, OC3 Mesh Seat, Gray

Good product, installation takes little time but end up with good quality chair, well made and comfortable and does all it says , sturdy and looks nice, purchased one, then purchased 2 more and happy with it, good deal for the price, certainly recommend

Very durable and ergonomic, easy to assemble and disassemble. Wish the seat was bigger length wise, it leaves a gap of 2 inch between my knees and upper thigh and I'm 5 foot 11 inches tall, has good lumbar support. The nylon is a saver, makes it breathable and comfortable, height and armrest are adjustable

All of the hardware was very good quality. The steel components are thick and plenty strong. The plastic parts were thick and strong too. This should be a durable chair. The integral coat hanger seems a bit goofy for home office use, but I may find a use for it. It's not in the way so it's not a problem. It would be nice if the assembly instructions were larger with bold print so I didn't need to use a magnifying lens for my old eyes. The fasteners should have been bagged for each step instead of all loose in the box for me to sort and divine which fasteners went where. The instructions were no help here either. I left the arm rests off the previous two office chairs but I installed them this time. The hard plastic is slick and my forearms slide off to the outside. The main reason I installed them was to complement a couple of nice features on the new chair. It has a headrest and it reclines. Without a headrest I could never use the reclining feature. I thought the arm rests would make it more comfortable to recline, so my arms had some support. I'm 6' 2", and even in the highest position, the headrest hits me on my shoulders and the base of my neck when sitting upright, which is a minor annoyance, but when I recline it supports my head almost as high as I'd like it to be. This chair is comfortable enough when reclining that I can sleep in it when I lower the seat so the floor acts as a footrest. My office is hot in the summer so the all mesh construction should be more comfortable in the warmer months, in addition to being more durable with no foam to compress and break down over time. I can easily clean it with soap and water if needed but the plastic mesh should be stain resistant. This mesh chair should look new longer than a fabric covered foam chair. I may 3D print some rubbery slip on covers for the slick hard plastic armrests.

I caught this chair on sale. I was hunting for a chair that resembles office chairs I've used in the past. This mesh feels very strong, and gives a lot of support. The look is sleek and clean, it provides great long-sitting comfort. I bought some of those roller-blade style wheels and it rolls amazing with them. I loved this chair so much, I bought two more for family. All three have held up for a long time, and have grown with kids. The headrest is adjustable, which is a nice bonus for the little ones as they get taller. I highly recommend this for work-at-home, or even lounging in for a few hours after a long days work, while you're taking care of business.

My hopes for this were probably too high, coming from a similar-style chair at work that I'm sure cost 3-4x as much (quality brand), but even considering the price, I'm still a little underwhelmed with this. Assembly is easy and quality overall feels adequate (not great) for the price point, but comfort is probably about average. First I should say, I'm a large man (6'3" 290lbs, wide frame & tall torso). Seat width and back height are great, but the width between the arm rests is too narrow. My body fits perfectly fine between them, but my elbows don't naturally rest on them. I wish I'd have paid more attention to this measurement as it goes a long way to making a chair feels like it fits you right. A few other things I don't care for: 1) The back feels flimsy when it's locked in place and you're moving about; 2) when reclining, arm rests stay put and are too far forward when fully reclined; 3) head rest doesn't hold itself up in the highest position (detents don't feel strong enough); 4) lumbar support "pillow" can't be set high enough, too low to appreciate. Foot rest works, extends father than others I've experienced and seems like it'd hold up for a while at least, but there's no resistance so it easily sides out when you're moving the chair, and the rest of the chair just isn't comfortable enough (in my opinion) to want to actually kick back in it. I find it closer to a nuisance than a feature as sometimes I can feel it against the back of my calf and it just feels like it's taking up space. I may end up removing it. The trouble with buying a chair online is, of course, not being able to test it before you buy and assemble it. If I had tried this in a Staples or something, I wouldn't have given this one a second look. Unfortunately I already went through the effort to build it, so I feel stuck with it even though I'd like to try a different one, even from the same brand. Speaking of which, neither the box nor the documentation mention the brand Flexispot. I looked up the brand before buying and thought they looked like a legitimate western brand (UK I believe), but at least this model seems like an anonymous Chinese chair that may or may not be sold under different brands, too. If your expectations are modest/realistic, I could see most people not loving it, but liking it just fine. I think you can do better for the money, however. Maybe even within the same "brand."

note: some assembly required! it takes a little elbow grease to get the parts jammed in and i spent some time on it but well worth the effort and it just means it is a sturdier and solidly built product that will hold up to force in the long run. i absolutely love this chair! it is incredibly comfortable and better than anything i've ever sat in (and i've sat in many many office chairs in my lifetime). it provides tons of support but doesn't hurt my boney buttocks or back. the only 2 small dings i'll give it are (1) i wish the base and wheels were metal for longer durability but i think the tradeoff is weight and (2) the mesh is very "drafty" so it let's air flow and doesn't keep my back warm... that being said, i think most people would interpret that more as a feature than a bug since like i said, i'm pretty skinny so i think most others would rather appreciate the cooling air flow of the mesh! the biggest selling point for me is the recline that i can lock in place... makes it very useful and perfect for midday naps :)

I selected this chair for its open mesh seat, simply because I'm tired of butt-sweats. 'Nuf said. All the other office chairs with this construction were more expensive, many having flaws I wanted to avoid, with the only good competition being around double the price of this chair. So I ordered it, with more than a little fear that this price was 'too good to be true" for a chair like this. My chair arrived yesterday, and I had it assembled and clean-up done in half an hour. It is exactly as described, though the description couldn't possible convey all the "little things" that become evident after sitting in it for a while. Not surprisingly, whatever that thing is behind the lower back has nothing to do with lumbar support: It is impossible for it to touch the fabric no matter how hard you lean into it. Which isn't at all a bad thing! The back of the chair is wonderfully curved, and has no need for additional lumbar support. My only complaint is I see no straightforward way to remove it: The chair would look better without it, and maybe it could be sold slightly cheaper as well. Speaking of wasted plastic, what's with that coat hanger on the back? It is part of the mount for the headrest, so it can't be left out during assembly. Could be an opportunity to save another buck. Then again, what if that's not what it is? Could it be push handles for Office Jousting? Will have to give that a try right after COVID ends. There are other minor nits to pick, such as the arm rests not being adjustable forward. But I knew that before I bought it, and I think I can live without that feature. I was also surprised to find the seat can't tilt, not even by adjusting the screws during assembly. But after sitting in it, I learned this tilt wasn't necessary: The seat mesh yields in just the right way to make that adjustment unnecessary, for me at least. Finally, there is just one real flaw that irks me: The back doesn't go completely vertical, which is important for me to be comfortable at a keyboard. I mean, who needs a chair that can recline that far back? Give me more vertical instead! Fortunately, I own a 3D printer can can design and print mounting wedges to fix this. May need to get longer bolts too, which is easy enough. But if you need a chair with a back that can go truly vertical, this chair may not be for you. However, the gas lifter is just right: The chair being replaced could never go quite high enough for me. This one does! The castors, while inexpensive, are wide enough to not dig deeply into carpet, another improvement over my old chair. The mesh material in the seat and back is everything I hoped it would be. Overall, this is a fantastic chair punching way above its price class, even allowing for the minor fix I'll be doing. To address the other minor issues mentioned above you'd have to spend at least an additional 50%, more likely double.

The FLEXISPOT Ergonomic Office Chair is a fantastic investment for anyone seeking comfort and support during long hours of work or study. From the moment you sit down, the chair’s thoughtful design becomes apparent: - The adjustable lumbar support perfectly contours to your lower back, reducing strain and promoting better posture. - The breathable mesh backrest keeps you cool, even during extended use. - The padded seat cushion strikes the right balance between firmness and comfort. One of the standout features is the chair’s versatility. It includes: - Adjustable armrests - Seat height adjustments - Recline tension options This makes it easy to customize the chair to fit your body and preferences. The 135-degree recline function is a nice touch, allowing you to lean back and relax during breaks without feeling unstable. - The smooth-rolling casters make it easy to move around. - The sturdy base ensures the chair stays firmly in place when needed. Assembly is straightforward, with: - Clear instructions - All necessary tools included The build quality feels durable, and the sleek, modern design fits seamlessly into any office or home workspace. While the price point might be slightly higher than some basic office chairs, the FLEXISPOT Ergonomic Office Chair is worth every penny for its: - Comfort - Adjustability - Long-term support If you’re looking to upgrade your seating experience, this chair is an excellent choice.

Decent chair

-Entrega: Correcta, dentro de lo estimado. -La quería gris pero la tuve que pedir negra (no había stock de la gris según la web) y me llegó gris. -Embalaje: Un desastre, todo metido en la caja sin ningún tipo de orden. -Materiales: Se ven decentes aun siendo plástico en un 95%, lo único metálico es el sistema de reclinado y el amortiguador. Solo el tiempo dirá como se comportan con el desgaste. -La malla es correcta, no es la mejor pero parece resistente. -El reposacabezas es un desastre, se mueve muchísimo y el perchero no se puede quitar, si quieres reposacabezas vas a tener que montar el perchero sí os sí. Me parece una decisión terrible. -Las ruedas no son nada del otro mundo, ni las he montado, tenía unas de silicona tipo patines roller con freno y sin dudarlo son las que he montado. -Tema ergo: Bien, te obliga a poner la espalda de forma correcta aunque la sujeción lumbar no es nada del otro mundo. Por el precio no está mal, pero tiene muchas cosas a mejorar.

Best quality

Ik snap niet zo goed waarom deze stoel zoveel goede reviews heeft. Ik heb deze stoel besteld voor mijn tienerzoon van 1.93m, maar daar is deze stoel veel te klein voor. Maar ook voor mijzelf vond ik deze stoel oncomfortabel. Het zitvlak is heel kort waardoor je het gevoel krijgt dat je de hele tijd gelanceerd wordt uit de stoel. En de rugleuning is niet zo hoog waardoor de hele stoel gewoon klein aandoet. Ook heb ik nergens kunnen vinden dat de rugleuning in meerdere standen vast gezet kon worden. Deze gaat dus retour.

Delivery and packaging were prompt and good. The chair is more expensive than other options, but it's of good quality. A technically trained employee was able to assemble it quite quickly. It's lightweight yet very comfortable and safe. Due to its material, it's not as visually overpowering, but rather appears see-through in parts. The openings, like pores, also prevent sweating. I'm satisfied.