Compact Mini Home Power Amplifier - 100W Smart Indoor Audio Stereo Receiver w/ RCA, 3 Microphone IN, AUX, 25/70V Outputs, LED, Input Selector, For PA, Amplified Speaker Sound System Pyle PCM60A Black

My choice for AV Automation. 100W of power of 4/8 Ohms or 25 Volts, flexibility when or where you need it. Long lasting and well made.

Pyle has a known problem with this Model of Amp, this is the review for first one of these I acquired, I almost burned my hand touching the bottom of the unit, with nothing connected to the inputs or outputs after about 20 minuets of run time. After the replacement unit did the same thing I called Pyle Customer Support, (Good Luck There) they wanted to give me a credit for the unit, when they got it back. The second Device from Amazon is the Same as the First. VARY HOT at Idle, the amp finals can't take heat like that vary long! Heat sink is internal with no fan. Good Luck

I bought this unit for our church as the 30-year old amp was showing signs of imminent failure and the price on Amazon was right. Except for having to remove the top cover to remove a stray part (looked like an MOV with full-length leads...not anything that fell out of the circuit board!) the installation was very easy and the unit worked as expected. I do need to say that the amp was larger and heavier than I expected.... It is definately a 100 watt amp! Although I may not need all the power, I chose this one since it had an XLR microphone connector which simplified my installation.

This Pyle Amplifier has been working fantastic since I installed it. The only complaint that I had was that it did not come with a power cord. Other than having to "custom" adjust the wiring from the old Bogen Communications WMA80 Amp to the new Pyle Amp everything else worked great.

Been using one for my whole-house Audio for about 15 years. Bought another for an outdoor party. These are super reliable and super flexible. Support 70v and 25v daisy chained speakers. Oh, and it has no Bluetooth. That makes it better since no stupid flashing LEDs and pulsing light bars.

Replaced another 70V/100V 120W unit (which was switching off intermittently) with this 70V 100W unit. I had 4 JBL C65P/T 5.25" Pendant Speakers in a 40' by 100' event space, powered at 100V before. Now with the Pyle PCM60A at 70V. The volume is the same, this has a bit warmer sound. I like the bluetooth and FM radio features. Lots of features at this price point and it sounds fine. We'll look into repairing the other so we have a spare. Also it fits in the space better, it's just on a shelf so the other amp always looked like I should have it in a rack or half rack. This is larger and there isn't a vent on the top, better since people always put stuff on top when it's just on a shelf. So very economical for our purpose.

Don’t buy unless you are comfortable working on the internals of an amplifier. Ordered two, had problems with both of them out of the box. After I was able to get one to work, it seemed to power the existing 25v speakers well. Both amps had a built in radio that was not advertised but was a nice addition. If I were ordering an amplifier today, this model would not be my first choice because of quality control issues

Stay away from Pyle products. This is the 2nd amplifier that we purchased from Pyle for our customers premises, it also the 2nd defective one. Both the 60w & 100w units had speaker output problems. The current PCM60A amplifier that we purchased 3 months ago is defective with a similar problem as the 1st. In all the 30 years that we have been in business we have never had a worst experience in getting the warranty repairs done. It took 2 months to get the 1st defective amplifier repaired. we are now trying to get a return authorization to send the 2nd defective amplifier back. It has been 3 weeks of phone calls and E-mails You get what you pay for for the product but customer support is something else