Rust-Oleum EpoxyShield Gloss Gray Garage Floor Coating Kit

I used the Rust-Oleum EpoxyShield Kit for my one-car garage, and I was honestly impressed with the results. The kit is rated for 200–250 sq ft, and I was able to cover 225 sq ft with solid coverage. Pros: • Looks fantastic – clean, glossy, and professional finish • Easy to apply – very manageable DIY project if you follow directions • Durable – provides great protection for the concrete floor Cons: • The kit only comes with 1 lb of decorative flakes, which is not enough if you want that high-end “full broadcast” look What I did differently (highly recommend): I purchased an additional 13 lbs of flakes, which made a huge difference and gave it that near full-flake, showroom-quality finish. Pro Tips: • Prep is everything: use a degreaser + etching solution, then let the floor dry completely • Don’t rush the process—good prep = long-lasting results • Add a clear topcoat + anti-slip additive (sold separately) for a more professional, durable, and safer finish Overall, this kit is an excellent value and delivers great results. With a little extra investment in flakes and topcoat, you can achieve a finish that rivals professional installations.

this stuff is great it's easy to apply and looks awesome. we went without the chips. I'm not sure a box will do the entire 2 car garage and we wanted multiple coats. Good prep helps a lot with having a good finish

We used this to cover our oriented strand board on the floor of our shed. It’s exceeded our expectations! No bubbles or cracks or flaking of the product.

Read a lot of reviews on this product before I purchased. I did the degreaser and the acid wash. Then I did the crack filler. When I started applying the color the paint acted like there was water or grease on the crack filler. I also was worried about not having enough paint to finish as many people said they almost ran out. In the end I didn’t put the paint on heavy enough and had bleed thru. Luckily I bought a second kit. After two days of cure I sanded the floor lightly with 120grit and added a second coat/. The floor looks awesome and so far has held up well. South florida weather

Followed the instruction , took 2 days of preparations and painting and let it dry for 5 days , what a waste of time & money . It started peeling after a couple of days , very bad quality

Water based epoxy . Not the best but good for the price. Prep good and it does what it’s designed for.

great product good coverage and vety durable

Used this for my garage floor and it turned out really nice. Easy to apply and the finish looks great.

初めてのDIYでこのレベルはすごい！ 施工性が抜群です！ 工程 ①付属の洗浄剤で洗浄 ②同メーカーのシーラーロックダウン塗布 ③本製品一度塗り ④乾燥72時間で完成 72時間で硬化もバッチリでした。早速物を搬入しました。効果に期待したいです。 他のレビューでもあった通り、塗料結構余ります。当方15m2の塗り床でしたが、製品の1/4は余りました。 レビューを見てたので、結構厚めに塗ったつもりでもこれだけ余ります。 ショートケーキのスポンジにメレンゲを塗るくらいの勢いでもっと大量に使っても良かったと思います。 厚めに塗ったお陰でムラも少なく、良い仕上がりになりました。 チップは全部使い切ろうと思って撒きましたが、これも結構量がありましたが、ピッタリ全てのチップを使い切りました。そこまで柄が欲しくない人はもっと少なめの半分とかでも良いと思います。

used 10 pack of this to paint the floor of our warehouse. it worked awesome. show room quality finish be sure to use clear coat finish with anti skid additive

Not used so far so can not comment but packing& looks are impressive

I was concerned that the volume of ipoxy paint, once mixed together, would not cover my entire 21m2 (226 square foot) garage and that is exactly what happened! There is an area of approximately 10m2 (108 square foot) that needs additional ipoxy paint to cover the floor evenly and fill all the little uneven areas. Very disappointed that I will now most likely need to buy another kit to finish this job... 😡

日本語の取り扱い説明書があれば良かったです‼️