Duronic Keyboard Platform DKTPX1 | Under Desk Drawer for Keyboard and Mouse | Clamp On Keyboard Tray | Ergonomic Workstation Solution | Sliding Pull-Out Tray | Easy Assembly

I don't write product reviews but I'm extremely happy with this product. The materials are all really high quality - solid wood tray, ball-bearing rollers for it to slide in and out of your desk on, solid metal clamps and screws. The only bit of plastic is the handle to tighten the clamps to your desk, but you don't need metal for that at all. Really easy and quick to assemble, took me 30 mins. I have a really thick desk (2 inches), so I was worried the clamps wouldn't be wide enough to fit, but in fact they did so comfortably and with a bit of wiggle room. The tray is large and sturdy, and pulls out and in fairly easily - it's a little stiff at present but I expect it will loosen up a bit over time. I expect that this thing will last me a good while. Just one thing to note, make sure your desk is wide enough as this is quite wide (but that's a good thing). From clamp edge to clamp edge its 33.5 inches, so your desk needs to be at least that wide. Also, make sure there's nothing under your desk that would obstruct the tray going back. I had this metal bar underneath that helps maintain the structure of the desk, but luckily my desk was wide enough that I could shift this product to the right slightly to avoid it. Really couldn't recommend this enough. I saw a similar product for £180. This one is £40. I don't see how the other one could be better at all unless it was made our of mahogany or something! Don't waste your money - this is the real deal. It's also far nicer than the cheaper ones (around £12-£15) that I saw. They looked quite small and plasticy, and you have to screw them into your desk, permanently damaging it. This one has nice rubber-covered clamps that don't ruin your desk, meaning you can change it to another desk very easily without any damage to either. The only slightly annoying thing about this is the fact the metal clamps do create a slight raised surface on your desk. However, this is a natural trade off if you want the clamp-style that won't screw into and ruin your desk. For me the clamps are sleek and minimal and won't impact my work - this is especially true as the tray is large and sturdy enough to act as a desk EXTENSION too. So the real estate you lose to the clamps is far less than what you gain overall with the tray. Couldn't be happier. Thanks Duronic!!

This is a great addition for someone like me who's a little bit too short for the desktop. This saves my wrists, elbows and my back. It's very sturdy and the material is quality, instructions are simple. Took 15 minutes to set up. BUT, the tray slides back in halfway on its own. This may not bother some but it bugs me considerably. I think it will stop as the lubricant dries out over time. Consider this if it would hinder your work or entertainment. TL;DR: Overall great product, decent size, good clearance between the desk and the tray, made with quality materials, simple instructions, 10-15 mins set up time. Only flaw is tray slides back in halfway on its own.

I am very impressed by how well made this is. I purchased it as I am currently using an old dining table as a desk but it was causing wrist and posture issues whilst working long hours at the computer because my hands were at awkward angles and I had to lean forward. I had to cut the front apron/skirt? section out of the table to make it fit (which wouldn't have been neccessary with normal desk) and it fits perfectly. I knew I would have to do this as the dimensions are well described in the product description. It saves a great deal of space and has saved me quite a bit of money by not having to get a proper office desk. It slots neatly away when not in use, I don't notice the metal brackets on the top as they do not get in the way, and there is no danger of knocking them off as they are nice and solid. I am obviously not putting a lot of weight on the tray but it is very sturdy with my hands wresting on the keyboard/mouse with no movement whilst I'm typing.

I wished I had had one of these years ago as it would have saved a lot of back and shoulder pain. Finally I can sit at my desk at work with my thighs and forearms parallel to the floor with my arms hanging in a relaxed fashion by my sides. I am not very tall and have discovered that most desks are based on a 6' person! I had tried raising my chair, footrests etc but nothing actually had me seated as the experts say you should to avoid strains until now. I searched for a while to find this device but it is absolutely brilliant. Didn't take long to put together, shelf has a good finish, it's solid and sturdy with plenty of space for keyboard (standard size) and mouse, leaves more room on the desk. I don't always leave reviews but I was so impressed with this device that I thought I really had to. If you are struggling with the same issues I was I would definitely recommend you buy one of these.

First off I'm not sure why people are saying this thing slides around mine if anything is to tight but might be able to loosen the scews in the side panel. I did give myself a nasty cut on the tip of my finger which bleed not good at all so be careful not to touch the silver parts The biggest problem was the clamps it was impossible for the clap to stay on without 2 washers on each one since this only comes with 2, 1 for each the top of the clamp would have just kept falling off, lucky my broken tray had spare washers. The side rails would have been nicer if they were black or had plates you could add but at least the tray wasn't in 2 parts like most which have a joining line down the middle So as it stands if it wasn't for the clamps giving me so many issues and cutting my fingers I would have given it a 4. Is it perfect No! Far from it is it worth 40 squid humm borderline, oh and also the sticky pads under the clamp a bit tricky to join up perfectly but I should have put them on a bit earlier in the build. If the company reads this for the next time please add black rails or black cover plates, add 4 washers as it's impossible to have the clamp bit secure, make it less sharp if possible because that cut was a nasty one, About it really keep the tray 1 piece like you did here and maybe a better instruction manual as it was pretty useless for the most parts no written instructions. It could be up there with Vivo like my other one if the company could sort out them issues I would rate them higher then them.

I received this Keyboard tray and it arrived yesterday and was put together last night. It is pretty sturdy and easy to put together. Overall I am pretty happy with it and I use it to hold my graphics tablet that has a display. (see image) Really solid construction, doesn't wobble once secured. You can have it ready within 15 minutes. You will need a cross head screwdriver!! It came as; The drawer wood/holder, solid and feels good. 2x Slider/rails and a piece for the clamp were together and a thick zip tie to stop the movement of the sliders. each in their own box. 2x upper half of clamp 6x screws (cross head) to attach the wooden piece to the rails. 2x metal pieces which are used for gripping. 2x screws (cross head) with a washer to mount these metal pieces to the clamping screw. 2x soft material that is then stuck to the clamp to stop it from damaging the desk. 4x screws (hex head/Allen key) to attach the upper half of clamp to lower half of the clamp 1x Allen key

This does exactly what you would expect - it holds your keyboard and stores it out of the way. I added it to an Ikea desk I have to give me some extra distance between myself and my screen - it does that well. I thought that it may not slide under the next with the keyboard's feet up, but it was just the right size for that...so everything is nicely out of the way. My only complaint is that one of the bolts on each side is hard to get into place with the allen key. There's limited room to turn it adequately to get it into the thread before having to reposition the key. This makes it a bit of a faff to get going. Besides that, the construction is very easy.

I bought this to use as a platform for a HOTAS setup - and it works brilliantly. The product is well built, solid, sturdy and stable. Even when fully extended there is no movement in any plane. It took about 15 minutes to put together, with no issues, and fitted to my desk with no problems. My desk is only 15mm thick, so right on the limit of the product spec - but it is attached with no hint of any issues. Some have mentioned the cost being high - well this one is a case of 'you get what you pay for'. Well worth it in my opinion, and a fraction of the cost of other bespoke alternatives I had looked at for HOTAS use.

Montato su una scrivania di design fa la sua bella figura , molto resistente, regolazioni a piacere.Ottimo prodotto

Super produit ! Très robuste, facile à monter et installer et en plus très beau ! J’avais peur que les pinces pour serrer le module sur le bureau, abîme mon bureau mais pas du tout ! Tout est prévu pour que ça n’abîme absolument rien (patins en feutre et petit joint)! Franchement rien à dire que du positif ! Bravo et merci !

Goede kwaliteit! Makelijk in elkaar te zetten. En lijkt net als ikea kwaliteit

Ich habe den Tastaturauszug jetzt seit c.a. einem Monat in Benutzung und bin sehr zufrieden. Er scheint echt robust zu sein und einmal festgeklemmt verrutscht da auch nichts. Ging auch einfach zu montieren und läst sich relativ leicht neu platzieren wenn man die Schrauben wieder aufdreht. Das Ausziehen geht einfach und ohne Wackeln. Es wäre allerdings schön gewesen wenn hinten die Vorrichtung, die verhindern soll, dass Sachen herunterfallen, über die gesamte Breite gehen würde und nicht nur in der Mitte. Die Tastatur fällt zwar nicht herunter, aber die Maus ist mir schon ein- zweimal hinten runtergerutscht weil es außen eben offen ist und ich da natürlich die Maus platziert habe (bin aber auch eher ungeschickt). Praktisch ist aber, dass in der Mitte noch zwei Öffnungen sind, da kann man z.B. Kabel durchlaufen lassen, falls man eine Tastatur oder Maus mit Kabel hat. Über die Haltbarkeit kann ich zwar noch nichts sagen aber bisher scheint alles in Ordnung zu sein und der Tastaturauszug macht soweit einen wertigen Eindruck.

機能性、品質共に大満足の商品です！ 後付けの引き出しというものはプラスチックのような素材で、天板もカタカタ動いてしまうようなイメージを勝手に持ってしまっていたのですが、こちらの商品は全くそんなことはなく、重厚感があり勝手に動くこともなく理想そのもので机周りが非常に便利になりました。 組み立てもシンプルで女一人で簡単に取り付けることができました。 久々に大満足の買い物ができました！