3/4 Inch 3:1 Adhesive Heat Shrink Tubing, 4 ft, 2 Pcs Red/Black

If you're looking for wheel barrel handle covers, this is the stuff. Nice and thick, shrinks down tight and mine has lasted 2 years so far, and keep it outside. I'm ordering more for my 3rd wheel barrel. Also worked well on a hammer.

Works as advertised. It can be slid over the ends of terminals that are already attached, and will shrink a lot more than typical heat shrink to conform to the terminal and wire. I have NOT had any issues with glue melting at ambient temperatures, even 100+ degrees temps we've had in my area lately. In fact, I don't think the glue starts to melt until after the tubing starts to shrink. I've used it on 8 gauge and 10 gauge wire and connectors, so I don't know if this 1/2 inch size would shrink down to fit smaller wire OD. If the vendor sells a 3/8 inch or 5/16 version, that's probably what you'd want for the smaller terminals. Edit: I did some more experimenting with smaller gauge connectors. I couldn't get the shrink tube inside diameter down to less than .200". So I'd say a shrink ratio of 2.5 to 1 is more accurate, at least for the 1/2 inch tube. But I still think it's a nice product and will buy a smaller size if available.

This is straight tube in case you need to shrink tube around something wires whatever a piece of metal something I bought this to help me assemble something I bought that didn’t come complete, but I was able to mount the 2 inch together that I used the heat tubing to cover it up and make it look like one piece and it gives it a nice appeal and look also it makes food taste better because I think it’s right next to the tubing and the food is afraid of the tubing because you don’t put black tubing around food because food will think it’s gonna be scared and cause nightmares and may take away the flavor, but it hasn’t done that so far but so far I only keep my spices next to it because the lids are closed tight so I don’t think that they worry about the tubing because nothing rattles around so I don’t know maybe the gnomes at night when I’m asleep move things around, but they don’t seem to care about it either actually, I guess that makes it a handy little grabber from when they grab onto it and pull yourself up because you know gnomes aren’t very tall but I haven’t seen them but I think that I think at night time they come out because sometimes things are moved and I noticed it but they’re not big changes but slight little changes and gnomes are about the only creatures that can come out there and do that and where they go with daytime or when you turn the light on, I don’t know. I’ve tried to find them. I said a trap ones for him, but they’re really clever and they avoid it. I think they watch me so they know it’s a trap they must hide behind things on my counter and sometimes I will jump up and just move something to see if I can find one but no, they’re quick. Little suckers are quick. They’re 2 feet run scary and they’re quiet too cause they have this shoe light thing that they wear that doesn’t make a lot of noise so it’s not like hearing dogs feet on a hardwood floor you don’t hear that noise on the countertop. I never see any evidence of them using a rope to climb up and down and sometimes I think that maybe they jumped down the garbage disposal so I turned it on just in case but I don’t hear anything so I know that sounds cruel but you know in this day and age if if you got a little tiny miniature people such as gnomes living in your house and not paying rent, that’s just not right you get little pads of paper and put notes up there. You leave me money or do dishes or do something but yeah gnomes are interesting creatures and I just have one question I would like to ask them. How long do you live and how do you wash your clothes because gnomes always seem to have the same stuff on at least the stuff and the ones that I see or have seen or dreamed about maybe they’re not really real at all that’s a good question cause if gnomes were really real then why wouldn’t there be more gnomes all over the place and why wouldn’t they be? I mean occasionally I drop something so if they’re moving dishes around, you would think that they would drop one and then you’d hear it and then you kept screwing out like a little cat that just found catnip or something and find those little things. I don’t have a cat because I’m afraid if I did have a cat, it might find them and eat them and then I would find little gnome booties in places that I don’t wanna find pieces of a gnome.

Works well, adhesive flows as it should to keep joints from exposure

First impression in wrapper they looked like thin not quality heat shrink. But after opening up and cutting to length and heating on my new battery cables I made, this stuff is super thick and good quality sealer. Shrunk at least 3 to 1. I bought 2 more sizes and have used the larger ones. Very happy with this heat shrink.

Worked great

would buy again

I recently made up some new wiring for my e-bike project. A project like this requires a couple different sizes of heat shrink tubing. The one-inch size, with 3:1 shrink ratio, is just about perfect to protect the joints between wires (I used 10- and 12-gauge) and connectors like the XT90. A short length of this stuff also works nicely to seal the ends of fabric wire loom wrap; it provides good protection and gives a professional look to your projects. Two observations, for what they're worth: 1) people use lighters and torches to make this stuff shrink, but I think an old-school heat gun really works best and provides more control; and 2) be very sure that everything is exactly how you want it before starting to apply this stuff, because it's not easy to remove if you decide you have to redo it.